The efficiency of the spiral-in of a black hole to the Galactic Centre     

Piero F. Spinnato  Michael Fellhauer  Simon F. Portegies Zwart 《Monthly notices of the Royal Astronomical Society》2003,344(1):22-32

We study the efficiency at which a black hole or dense star cluster spirals in to the Galactic Centre. This process takes place on a dynamical friction time-scale, which depends on the value of the Coulomb logarithm (ln Λ). We determine the accurate value of this parameter using the direct N -body method, a tree algorithm and a particle-mesh technique with up to two million plus one particles. The three different techniques are in excellent agreement. Our measurement for the Coulomb logarithm appears to be independent of the number of particles. We conclude that  ln Λ= 6.6 ± 0.6  for a massive point particle in the inner few parsec of the Galactic bulge. For an extended object, such as a dense star cluster, ln Λ is smaller, with a value of the logarithm argument Λ inversely proportional to the object size.  相似文献   

The nature of parallax microlensing events towards the Galactic bulge     

Martin C. Smith  Vasily Belokurov  N. Wyn Evans  Shude Mao  Jin H. An 《Monthly notices of the Royal Astronomical Society》2005,361(1):128-140

  相似文献   

The Optical Gravitational Lensing Experiment: catalogue of stellar proper motions in the OGLE-II Galactic bulge fields     

T. Sumi  X. Wu  A. Udalski  M. Szyma&#;ski  M. Kubiak  G. Pietrzy&#;ski  I. Soszy&#;ski  P. Wo&#;niak  K. &#;ebru&#;  O. Szewczyk  &#;. Wyrzykowski 《Monthly notices of the Royal Astronomical Society》2004,348(4):1439-1450

  相似文献   

Experimental method for quantifying resistance to the opening of netting panels   总被引：1，自引：0，他引：1  

Sala  A.; O'Neill  F. G.; Buglioni  G.; Lucchetti  A.; Palumbo  V.; Fryer  R. J. 《ICES Journal of Marine Science》2007,64(8):1573-1578

  相似文献   

山西大同口泉山隆升-挠褶构造研究   总被引：2，自引：1，他引：1  

张兆琪 《华北地质》2008,31(4)

挠曲褶皱构造在山西广泛存在,大同市之西盆地边缘"口泉山断裂带"实际是一个大型挠褶构造带。以往的研究者仅把它当成几个断裂分段研究。认识和研究挠褶构造不仅能够在理论上取得进展,而且还能够指导煤矿勘探和开采,取得很好的经济效益。通过构造带上几个地方典型构造现象的研究得出,该构造带构造现象虽然复杂,但它并不是杂乱无章的,运用挠褶构造的理论上能够恢复它的原始形态以及它的发生发展的全过程。挠褶构造的形成与构造块体的隆升有关,其形成为:地幔柱隆升-地层上拱-挠褶-冲断走滑等。  相似文献   

青藏高原东缘龙门山晚新生代剥蚀厚度与弹性挠曲模拟   总被引：7，自引：3，他引：7       下载免费PDF全文

李勇  ALDENSMORE  周荣军  MA  ELLIS 《地质学报》2005,79(5):608-615

龙门山是青藏高原东缘边界山脉,具有青藏高原地貌、龙门山高山地貌和山前冲积平原三个一级地貌单元。利用数字高程模式图像和裂变径迹年代测定方法研究和计算龙门山晚新生代剥蚀厚度与剥蚀速率,结果表明:3.6 Ma以来龙门山的剥蚀厚度介于1.91-2.16 km之间,剥蚀速率介于0.53-0.60 mm/a之间。在此基础上,开展了该地区岩石圈的弹性挠曲模拟,结果表明龙门山的隆升机制具有以构造缩短隆升和剥蚀卸载隆升相叠合的特点。3.6 Ma之前,龙门山的隆升与逆冲推覆构造负载有关,以构造缩短驱动的构造隆升为特色;3.6 Ma之后,龙门山的隆升与剥蚀卸载驱动的抬升有关,并以剥蚀卸载隆升为特色,进而提出了龙门山晚新生代以来的隆升机制以剥蚀成山作用为主的认识。  相似文献   

ISO-834标准火灾作用后钢管混凝土的轴压刚度和抗弯刚度   总被引：4，自引：1，他引：4  

霍静思  韩林海 《地震工程与工程振动》2002,22(5):143-151

火灾后钢管混凝土的轴压刚度和抗弯刚度是钢管混凝土结构变形性能和抗震分析的重要指标，也是火灾后钢管混凝土修复和加固的重要依据之一，本文利用数值方法计算了标准火灾作用后钢管混凝土轴压构件和纯弯构件荷载-变形关系曲线，分析了受火时间、材料强度、含钢率、截面尺寸等因素的影响规律，最后推导了标准火灾作用后钢管混凝土轴压刚度和抗弯刚度的简化计算公式，所得结果可供有关钢管混凝土结构工程设计时参考。  相似文献   

国道219线新-藏公路改建工程地质灾害评价   总被引：1，自引：0，他引：1  

李铁锋  刘长兵  李欣 《中国地质灾害与防治学报》2003,14(4):26-29

国道219线新-藏区界至红土达坂路段全长109．55km。大部分路段穿越湖盆槽谷中央部位，部分线路沿湖盆边缘台地布设，海拔高度介于5000-5400m之间，地势平坦开阔，多年冻土发育，工程地质条件较差；现有公路路基高度低，几乎没有排水设施。冬季易产生路基冻胀和涎流冰危害，春、夏季因冻土融化，常引起路基沉陷和翻浆，严重危害公路运输安全甚至阻断交通。公路工程修建活动将极大地改变冻土环境，使天然状态下的水分循环发生改变，导致多年冻土退化，上限加深，进一步诱发冻胀、融沉、热融滑塌等冻土灾害，加剧风沙灾害、诱发公路边坡失稳破坏。在即将进行的公路改、扩建工程中，应采取保护冻土的设计原则，优选线路，加强侧向排水，合理设置取弃土场。  相似文献   

Flexural subsidence by 29 Ma on the NE edge of Tibet from the magnetostratigraphy of Linxia Basin, China   总被引：43，自引：0，他引：43  

Xiaomin Fang  Carmala Garzione  Rob Van der Voo  Jijun Li  Majie Fan 《Earth and Planetary Science Letters》2003,210(3-4):545-560

This study provides a detailed magnetostratigraphic record of subsidence in the Linxia Basin, documenting a 27 Myr long sedimentary record from the northeastern edge of the Tibetan Plateau. Deposition in the Linxia Basin began at 29 Ma and continued nearly uninterruptedly until 1.7 Ma. Increasing rates of subsidence between 29 and 6 Ma in the Linxia Basin suggest deposition in the foredeep portion of a flexural basin and constrain the timing of shortening in the northeastern margin of the plateau to Late Oligocene–Late Miocene time. By Late Miocene–Early Pliocene time, a decrease in subsidence rates in the Linxia Basin associated with thrust faulting and a 10° clockwise rotation in the basin indicates that the deformation front of the Tibetan plateau had propagated into the currently deforming region northeast of the plateau.  相似文献   

Flexure of the Indian plate and intraplate earthquakes   总被引：2，自引：0，他引：2  

Roger Bilham  Rebecca Bendick  Kali Wallace 《Journal of Earth System Science》2003,112(3):315-329

The flexural bulge in central India resulting from India's collision with Tibet has a wavelength of approximately 670 km. It is manifest topographically and in the free-air gravity anomaly and the geoid. Calculations of the stress distribution within a flexed Indian plate reveal spatial variations throughout the depth of the plate and also a function of distance from the Himalaya. The wavelength (and therefore local gradient) of stress variation is a function of the effective elastic thickness of the plate, estimates of which have been proposed to lie in the range 40–120 km. The imposition of this stress field on the northward moving Indian plate appears fundamental to explaining the current distribution of intraplate earthquakes and their mechanisms. The current study highlights an outer trough south of the flexural bulge in central India where surface stresses are double the contiguous compressional stresses to the north and south. The Bhuj, Latur and Koyna earthquakes and numerous other recent reverse faulting events occurred in this compressional setting. The N/S spatial gradient of stress exceeds 2 bars/km near the flexural bulge. The overall flexural stress distribution provides a physical basis for earthquake hazard mapping and suggests that areas of central India where no historic earthquakes are recorded may yet be the locus of future damaging events.  相似文献