隧道工程地质评价的内容和方法   总被引：2，自引：0，他引：2  

陈新建  孙琳  李新星  孙巧银 《地球科学与环境学报》2004,26(1):41-45

结合工程隧道实际,首先阐述了隧道工程的基本地质环境和工程地质条件,然后针对隧道工程可能出现的不良地质现象和可采取的工程措施,从大气降水、围岩稳定、围岩压力、洞口稳定、隧道比选等角度探讨隧道工程地质评价的主要方法和一般内容,进行隧道工程地质评价,为隧道施工、支护提供了依据.  相似文献   

北部湾北部海上油田发现历程     

钟铿  潘其云 《南方国土资源》1997,(2)

北部湾北部海上油田的开发工作始于５０年代，６０～７０年代作了大量地质工作。改革开放后，油气勘查取得突破性进展。累计发现油气构造６个，含油面积超过４０ｋｍ２，石油地质储量约４亿ｔ，已开发油田２个，揭开我国南方油气资源开发序幕  相似文献   

胜利油气区有机包裹体研究及其在油气勘探中的应用     

李荣西  金奎励  廖永胜 《地球科学与环境学报》1997,(4)

应用显微光度术、显微傅立叶红外光谱（Ｍｉｃｒｏ－ＦＴ．ＩＲ）和飞行时间二次离子质谱（ＴＯＦ－ＳＩＭＳ）等原位微分析技术并结合均一温度测量对胜利油气区下第三系沙河街组沙三段中有机包裹体进行了研究。区分出两类有机包裹体，即原生有机包裹体和次生有机包裹体。结果表明两类有机包裹体特征不同，二者物质组成、有机质成分及化学结构、热演化程度等差别也较大。结合地质分析表明原生有机包裹体是沙三段烃源岩生成烃类运移产物，具“自生自储”特点，而次生有机包裹体是沙四段烃源岩生成的烃类二次运移的产物。沙三段是沙河街组油气运移和聚集的主要层位，因而是寻找油气资源的主要目标层。研究表明，有机包裹体是研究油气生成、运移、聚集和演化等成藏系统最有效的手段之一，在油气勘探中有重要的应用意义。  相似文献   

A photometric study of the polar ring galaxy UGC 5600     

G. M. Karataeva  V. A. Yakovleva  V. A. Hagen-Thorn  O. V. Mikolaichuk 《Astronomy Letters》2001,27(2):74-80

We analyze our BVR _c photometry for UGC 5600, a candidate polar ring galaxy, obtained with the 6-m telescope. We have confirmed the existence of an inner polar ring and show that the outer ring-shaped structure represents spiral arms; i.e., UGC 5600 belongs to the rare class of gas-rich spiral galaxies with inner polar rings.  相似文献   

含有集约束向量极值问题的最优性条件     

吴泽忠 《成都信息工程学院学报》2004,19(2):258-262

在序线性拓扑空间里研究了含有集约束向量极值问题的最优性条件,并建立了充分性和必要性条件.  相似文献   

八庙—青山金红石矿床化学成分与成矿关系     

徐少康  李博昀  程建祖  刘振山 《河南国土资源》1996,(4)

本矿床是我国金红石矿床重要的成因及工业类型，为具有特定化学成分的岩石在特定变质条件下形成的。本文通过对大量数据的处理，查明了化学成分与成矿的关系：高Ａｌ２Ｏ３、ＭｇＯ、Ｆｅ２Ｏ３＋ＦｅＯ、Ｋ２Ｏ、Ｐ２Ｏ５、Ｈ２Ｏ＋、ＭｎＯ，低ＳｉＯ２、ＣａＯ、Ｎａ２Ｏ、ＣＯ２、Ｓ等，利于钛富集；高ＴｉＯ２、ＭｇＯ、Ｐ２Ｏ５、Ｓ，低ＳｉＯ２、ＣａＯ、Ｋ２Ｏ、Ａｌ２Ｏ３、Ｆｅ２Ｏ３／ＦｅＯ，利于金红石形成；高Ｓｃ、Ｚｒ、Ｎｉ、Ｚｎ及Ｌａ／Ｙｂ，低Ｙ、Ｎｂ、Ｔｈ、Ｃｄ、Ｂａ、Ｂｅ、ΣＲＥＥ，利于金红石纯度提高。对研究矿床成因及寻找新的同类矿床等有重要意义  相似文献   

济南市地下水资源现状分析及开发利用建议          下载免费PDF全文

段秀铭  林常平  靳丰山 《山东国土资源》2001,17(1):40-45

本文采用较新的统计资料,对济南市地下水资源的开发利用现状及开采潜力,以行政区划为单元进行了分析论证.针对地下水资源开发利用中存在的环境水文地质问题,提出了开发利用规划和建议.  相似文献   

Challenging a Paradigm: Do We Need Active and Inactive Areas to Account for Near-Nuclear Jet Activity?     

Crifo  J.-F.  Rodionov  A. V.  Szegö  K.  Fulle  M. 《Earth, Moon, and Planets》2002,90(1-4):227-238

We briefly describe an advanced 3D gas dynamical model developed for the simulation of theenvironment of active cometary nuclei. The model canhandle realistic nucleus shapes and alternative physical models for the gas and dust production mechanism.The inner gas coma structure is computed by solving self-consistently(a) near to the surface the Boltzman Equation(b) outside of it, Euler or Navier-Stokes equations.The dust distribution is computed from multifluid ``zero-temperature' Euler equations,extrapolated with the help of a Keplerian fountain model.The evolution of the coma during the nucleus orbital and spin motion,is computed as a succession of quasi-steady solutions. Earlier versions of the model using simple,``paedagogic' nuclei have demonstrated that the surface orographyand the surface inhomogeneity contribute similarly to structuring the near-nucleusgas and dust coma,casting a shadow on the automatic attribution of such structures to ``active areas'.The model was recently applied to comet P/Halley, for whichthe nucleus shape is available. In the companion paper of this volume,we show that most near-nucleus dust structuresobserved during the 1986 Halley flybys are reproduced, assuming that the nucleus is strictly homogeneous. Here, we investigate the effect of shape perturbations and homogeneityperturbations. We show that the near nucleus gas coma structure is robust vis-a-vissuch effects. In particular, a random distribution of active and inactive areaswould not affect considerably this structure, suggesting that such areas,even if present, could not be easily identified on images of the coma.  相似文献   

The second order characteristic condition for plastic flow     

Graham Weir  Roger Young 《国际地质力学数值与分析法杂志》2003,27(15):1299-1316

In this paper the second order characteristic (discontinuous bifurcation) condition is derived for the granular flow (fully plastic) equations. This second order bifurcation equation is shown to be formally identical to the first order localization requirement during steady elastoplastic deformation provided the elastic compliance tensor is substituted for the product of the plastic multiplier with the flow Hessian. For isotropic yield and flow functions the invariant form of the characteristic condition is given in detail, as well as an alternative expression in adapted co‐ordinates. The characteristic condition can be regarded as defining a hardening function which is maximized to identify the critical angles. When the method is applied to 3D Coulomb flow, Mohr's 3D fracture plane conditions are obtained uniquely. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Fast iterative solution of large undrained soil‐structure interaction problems     

Kok‐Kwang Phoon  Swee‐Huat Chan  Kim‐Chuan Toh  Fook‐Hou Lee 《国际地质力学数值与分析法杂志》2003,27(3):159-181

In view of rapid developments in iterative solvers, it is timely to re‐examine the merits of using mixed formulation for incompressible problems. This paper presents extensive numerical studies to compare the accuracy of undrained solutions resulting from the standard displacement formulation with a penalty term and the two‐field mixed formulation. The standard displacement and two‐field mixed formulations are solved using both direct and iterative approaches to assess if it is cost‐effective to achieve more accurate solutions. Numerical studies of a simple footing problem show that the mixed formulation is able to solve the incompressible problem ‘exactly’, does not create pressure and stress instabilities, and obviate the need for an ad hoc penalty number. In addition, for large‐scale problems where it is not possible to perform direct solutions entirely within available random access memory, it turns out that the larger system of equations from mixed formulation also can be solved much more efficiently than the smaller system of equations arising from standard formulation by using the symmetric quasi‐minimal residual (SQMR) method with the generalized Jacobi (GJ) preconditioner. Iterative solution by SQMR with GJ preconditioning also is more elegant, faster, and more accurate than the popular Uzawa method. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献