Smeared crack approach: back to the original track     

M. Cervera  M. Chiumenti 《国际地质力学数值与分析法杂志》2006,30(12):1173-1199

This paper briefly reviews the formulations used over the last 40 years for the solution of problems involving tensile cracking, with both the discrete and the smeared crack approaches. The paper focuses on the smeared approach, identifying as its main drawbacks the observed mesh‐size and mesh‐bias spurious dependence when the method is applied ‘straightly’. A simple isotropic local damage constitutive model is considered, and the (exponential) softening modulus is regularized according to the material fracture energy and the element size. The continuum and discrete mechanical problems corresponding to both the weak discontinuity (smeared cracks) and the strong discontinuity (discrete cracks) approaches are analysed and the question of propagation of the strain localization band (crack) is identified as the main difficulty to be overcome in the numerical procedure. A tracking technique is used to ensure stability of the solution, attaining the necessary convergence properties of the corresponding discrete finite element formulation. Numerical examples show that the formulation derived is stable and remarkably robust. As a consequence, the results obtained do not suffer from spurious mesh‐size or mesh‐bias dependence, comparing very favourably with those obtained with other fracture and continuum mechanics approaches. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

The grain-size characteristics of Quaternary deposits at Xingshan near Siping in Jilin province, China     

Maxwell A Boateng  Xikui Wang 《世界地质(英文版)》2006,9(1)

This research paper analyses the grain-size characteristics of the Quaternary deposits at Xingshan near Siping, Jilin province in China by employing graphic measures to study the grain size distribution and its mode of transport and deposition. The Quaternary deposits at Xingshan lie unconformable on Cretaceous rocks made of siltstone, mudstone and sandstone. The average grain size is between 8.06 to 8.55Φ (0.002 6 ～0.003 7 mm). The Quaternary deposits at Xingshan mainly compose of very fine silt to clay. The compositions of the grade are clay 63% and silt 37%. The clay size components are weathered debris transported and deposited by flowing water from the SE highlands or hills to the low lying NW Xingshan plains whereas the silty components accumulated by aoelian process. The Quaternary deposits at Xingshan accumulated in the middle and late Pleistocene interglacial periods from (459.12～39.03) ka to (88.92～7.56) ka. The standard deviation ranged from 0.96 to 1.36Φ, indicating that the sediments are moderately to poorly sorted, Coefficient of skewness ranged from 0.16～0.31 with an average skewness of 0.218, (Positively skewed towards fine). Kurtosis values (0.84～1.05) from the grain size distribution and visual inspection of the frequency curves indicate platykurtic to mesokurtic curves and unimodal to bimodal grain-size distribution. The type of deposit formation is sand dune and the source is at a distal from its provenance.  相似文献   

Viscosity of the upper mantle from laboratory creep and anelasticity measurements in peridotite at high pressure and temperature     

Hiroki Sato 《Geophysical Journal International》1991,105(3):587-599

  相似文献   

Techniques to measure grain-size distributions of loamy sediments: a comparative study of ten instruments for wet analysis   总被引：2，自引：0，他引：2  

DIRK GOOSSENS 《Sedimentology》2008,55(1):65-96

Ten instruments for measuring the grain‐size distribution of loamy sediments in water were tested in a comparative study. Instruments tested were: the Malvern Mastersizer S, the Coulter LS 200, the Fritsch Analysette 22 (version C), the Horiba Partica LA‐950, the Sedigraph 5100, the Atterberg cylinder, the Coulter Multisizer 3, the CIS‐100, the EyeTech and the image analysis software Histolab. The first four instruments use laser diffraction. The Sedigraph and Atterberg cylinder are based on sedimentation. The Coulter Multisizer 3 uses impedance measurements and the last three instruments use optical techniques. Grain‐size analyses were carried out on four sediments with median grain diameters of approximately 35, 30, 12 and 9 μm, respectively, and with no particles >90 μm. The laser diffraction instruments produced the best results for the various criteria considered in this study, followed by the Coulter Multisizer 3 (electrical sensing zone technique), the sedimentation techniques and the optical methods. However, the study also showed that there is no such thing as an ‘ideal’ method because techniques may score differently according to the criterion tested. An appropriate evaluation thus requires that various criteria be considered. Issues to be taken into account are: type of sediment, quantity of sediment available, speed of measurement, complexity of the measurement protocol, processing of the data, reproducibility of the results and the specific aims of the study undertaken.  相似文献   

东菲律宾海深水铁锰结壳发育站位沉积物的粒度及黏土矿物学特征          下载免费PDF全文

徐兆凯  李安春  蒋富清  刘建国 《海洋学报》2007,29(2):150-155

大洋铁锰结壳是潜在的重要海洋资源,多年来世界各国对此已作了大量调查.传统意义上的铁锰结壳均分布于3000m水深以浅的海山基岩上.中国科学院海洋研究所在对东菲律宾海的地质调查中采集到大量褐黑色深水铁锰结壳.在300多个站位的取样中,在44个站位采集到结壳样品,可见结壳在研究区的分布较为广泛.该结壳发育于4000~5000m水深的致密至半固结沉积物的表层,厚度一般为2~3cm,最厚可达7cm.结壳为板(层)状.  相似文献   

Depth dependence of target strength of live kokanee salmon in accordance with Boyle's law   总被引：3，自引：5，他引：3  

Mukai  Tohru; Iida  Kohji 《ICES Journal of Marine Science》1996,53(2):245-248

  相似文献   

南海南部近50万年来沉积物特点及古环境意义     

梅西  郑洪波  黄恩清  陈国成  谢昕 《海洋地质与第四纪地质》2007,27(4):77-84

对南海南部MD05-2897孔沉积物的分析显示,该孔涵盖氧同位素1~12期,底界年龄约为50万年。碳酸钙含量曲线形态基本与底栖有孔虫氧同位素曲线平行,即碳酸钙高值对应氧同位素轻值,呈现典型的大西洋型碳酸钙分布模式。碳酸钙含量在冰消期的高值出现及含量变化均领先于氧同位素,证明低纬海区"碳酸钙泵"对大气二氧化碳浓度和温度的作用。粒度分析显示,3~5μm组分含量曲线的变化与氧同位素曲线基本平行,说明它主要受海平面升降变化控制,可作为海平面变化的间接指标。而1.5~2.5μm粒级颗粒主要通过河流的悬浮搬运,直接受亚洲夏季风及其所带来降雨的影响,可间接反映夏季风的强弱变化。南海南部深海沉积中的季风记录具有0.1 Ma偏心率周期,40 ka斜率周期,20 ka岁差和10 ka半岁差周期等丰富的频谱,显示出低纬度海区气候变化对轨道周期的良好响应。  相似文献   

Population dynamics of two marine polychaetes: the relative role of density dependence, predation, and winter conditions     

van der Meer  Jaap; Beukema  Jan J; Dekker  Rob 《ICES Journal of Marine Science》2000,57(5):1488-1494

  相似文献   

泥石流堆积物的粒度分布及其分形结构   总被引：2，自引：0，他引：2       下载免费PDF全文

倪化勇  刘希林 《沉积与特提斯地质》2008,28(3):35-40

泥石流堆积物主要由砾石、砂砾、粉粒和粘粒组成,组成泥石流堆积物的颗粒级配变幅很大,从直径大于数十米的巨砾到肉眼难以看见的几微米的胶体微粒均有分布,大小颗粒粒径之比可达106—107。泥石流堆积物颗粒具有明显的自相似性和无标度区间。本文以小江流域多处泥石流堆积物为研究对象,采用图解法全面分析了泥石流堆积物的粒度组成特征,根据分形理论计算了泥石流堆积物颗粒的分维值,对泥石流堆积物的分形特征进行探讨,并与泥石流堆积物粒度特征相联系,发现分维很好的反映了泥石流堆积物颗粒组成及其粒度分布特征。将泥石流堆积物颗粒分维与泥石流的粘性、形成年代等性质相联系,以找出它们彼此之间的关系。  相似文献   

Strength and stability of frictional sliding of gabbro gouge at elevated temperatures   总被引：7，自引：1，他引：7  

Changrong He  Wenming Yao  Zeli Wang  Yongsheng Zhou   《Tectonophysics》2006,427(1-4):217

To investigate the strength of frictional sliding and stability of mafic lower crust, we conducted experiments on oven-dried gabbro gouge of 1 mm thick sandwiched between country rock pieces (with gouge inclined 35° to the sample axis) at slip rates of 1.22 × 10^− 3 mm/s and 1.22 × 10^− 4 mm/s and elevated temperatures up to 615 °C. Special attention has been paid to whether transition from velocity weakening to velocity strengthening occurs due to the elevation of temperature.Two series of experiments were conducted with normal stresses of 200 MPa and 300 MPa, respectively. For both normal stresses, the friction strengths are comparable at least up to 510 °C, with no significant weakening effect of increasing temperature. Comparison of our results with Byerlee's rule on a strike slip fault with a specific temperature profile in the Zhangbei region of North China shows that the strength given by experiments are around that given by Byerlee's rule and a little greater in the high temperature range.At 200 MPa normal stress, the steady-state rate dependence a − b shows only positive values, probably still in the “run-in” process where velocity strengthening is a common feature. With a normal stress of 300 MPa, the values of steady-state rate dependence decreases systematically with increasing temperature, and stick-slip occurred at 615 °C. Considering the limited displacement, limited normal stress applied and the effect of normal stress for the temperatures above 420 °C, it is inferred here that velocity weakening may be the typical behaviour at higher normal stress for temperature above 420 °C and at least up to 615 °C, which covers most of the temperature range in the lower crust of geologically stable continental interior. For a dry mafic lower crust in cool continental interiors where frictional sliding prevails over plastic flow, unstable slip nucleation may occur to generate earthquakes.  相似文献