GNSS多天线基线网单历元模糊度同步解算法     

汤佳明  柴艳菊  闻德保  欧吉坤 《大地测量与地球动力学》2019,39(3):262-268

提出多天线基线网单历元模糊度同步解算法，其具体实现步骤为：1）根据宽巷组合模糊度易于固定的优点，采用附加已知基线长度约束法同步解算各基线的宽巷模糊度，得到dm~cm级精度的近似基线分量；2）将解算得到的各近似基线分量作为约束，同步解算各基线的基频模糊度，以获取mm级精度的基线矢量。该方法的关键在于检验各历元宽巷模糊度解算的正确性，以获取可靠的近似基线分量，为解算各基线的基频模糊度提供准确的基线先验信息。由于动态情况下各历元观测信息比较少，单纯依赖ratio检验不可靠，提出结合基线误差、单位权中误差、基线网模糊度闭合环及ratio值等对多组宽巷模糊度进行检验，避免ratio值设置不当导致模糊度检验中发生纳伪和弃真问题。实测数据结果证明，该处理方法使得模糊度解算的成功率提高1%~2%，可以获取移动平台更丰富的导航信息，提高其服务能力。  相似文献   

基于多元统计分析的渔山列岛潮间带软体动物功能群和次级生产力比较   总被引：1，自引：0，他引：1  

徐鹏  刘好真  刘懂  焦海峰  王一农  尤仲杰 《海洋与湖沼》2018,49(1):151-159

渔山列岛于2008年成为国家级海洋生态保护区,为了解渔山列岛保护区内潮间带软体动物次级生产力的时空变化。于1982年和2010年的3个季节(春、夏、冬)在渔山列岛进行潮间带软体动物调查,采用多元统计分析软体动物时空差异,以Brey经验公式计算分析软体动物次级生产力(P值,P/B值)。结果表明,年际间物种食性结构发生了明显的改变,1982年潮间带软体动物对次级生产力贡献率最大的物种有单齿螺(Monodonta labio)、锈凹螺(Chlorostoma rustica),占软体动物总次级生产力的42.88%,2010年潮间带软体动物对次级生产力贡献率最大的物种有覆瓦小蛇螺(Serpulorbis imbricata)、条纹隔贻贝(Septifer virgatus),占软体动物总次级生产力的75.96%。1982年,年均栖息密度为2758ind/m2,年均生物量为2100.26g/m2,年均次级生产力为240.04g/(m2·a),年均P/B值为0.63a–1;2010年,年均栖息密度为699ind/m2,年均生物量为1101.85g/m2,年均次级生产力为94.82g/(m2·a),年均P/B值为0.55a–1。多因素方差分析表明软体动物次级生产力年际间差异显著(F=5.761,P0.05),季节间和潮位间差异都不显著(F=0.135,P0.05;F=2.076,P0.05),P/B的值较低,表明该海域软体动物世代更替速度较慢,2010年的P/B值(0.55a–1)低于1982年的P/B值(0.63a–1),表明近30年来群落结构受到影响。  相似文献   

不同排列方式和间隙比下双圆柱流致振动特性研究   总被引：1，自引：0，他引：1  

刘巨保  杨明  岳欠杯  丁宇奇  姚利明 《海洋工程》2018,36(4):105-113

采用基于ALE的流固耦合分析方法,将圆柱体振动模型简化为平面双自由度质量-弹簧-阻尼系统,进行了计算参数无关性分析。对不同θ角和间隙比T下的双圆柱流致振动进行数值模拟,并与单圆柱振动计算结果进行比较,得到了不同θ角和间隙比T下中心圆柱的升阻力系数、流场分布和运动轨迹变化情况。通过分析发现小间隙比下由于两圆柱间的相互干扰,改变了中心圆柱的尾涡结构,导致了升力和阻力系数随不同θ角而发生变化;小间隙比下由于两圆柱间的相互干扰影响,均使中心圆柱的轨迹在不同θ角下发生了较大的变化,顺流向的振动频率与单圆柱振动时相比出现了多倍频,导致其运动轨迹发生了变化。  相似文献   

Helmert方差分量估计在GPS/GLONASS/BDS组合定位权比确定中的应用     

刘金海  涂锐  张睿  张鹏飞  卢晓春 《大地测量与地球动力学》2018,38(6):568-570

因GNSS系统间观测噪声、轨道精度的差异，采用经验权比进行组合定位难以得到最优结果。基于此，在GPS/GLONASS/BDS组合定位中引入Helmert方差分量估计，对GPS/GLONASS/BDS组合单点定位和基线解算中各系统观测值进行合理定权。实验表明，采用该方法确定的伪距观测值最佳权比为5∶1∶1，相位观测值最佳权比为1∶1∶1，有效提高了GPS/GLONASS/BDS组合定位的精度和可靠性。  相似文献   

基于噪声谱比法的内蒙古西部地区台站场地响应研究     

张珂  王鑫  王树波  张红才  宋晓燕 《大地测量与地球动力学》2020,40(6):646-651

利用内蒙古西部12个台站的地脉动噪声数据，采用噪声谱比法研究台站的场地响应情况。分析表明，台站场地响应按曲线形态可分为3类，且可能受地形地貌、局部构造和台基状况等条件影响。对比分析噪声谱比法与Moya方法的场地响应结果发现，场地响应曲线形态基本一致，只有极少数台站存在明显差异。结果表明，内蒙古西部区域大部分台站的台基状况总体较好，场地响应曲线较为平坦，无明显频率放大点。  相似文献   

A machine learning approach for predicting computational intensity and domain decomposition in parallel geoprocessing     

Peng Yue  Fan Gao  Boyi Shangguan  Zheren Yan 《International journal of geographical information science》2020,34(11):2243-2274

ABSTRACT

High performance computing is required for fast geoprocessing of geospatial big data. Using spatial domains to represent computational intensity (CIT) and domain decomposition for parallelism are prominent strategies when designing parallel geoprocessing applications. Traditional domain decomposition is limited in evaluating the computational intensity, which often results in load imbalance and poor parallel performance. From the data science perspective, machine learning from Artificial Intelligence (AI) shows promise for better CIT evaluation. This paper proposes a machine learning approach for predicting computational intensity, followed by an optimized domain decomposition, which divides the spatial domain into balanced subdivisions based on the predicted CIT to achieve better parallel performance. The approach provides a reference framework on how various machine learning methods including feature selection and model training can be used in predicting computational intensity and optimizing parallel geoprocessing against different cases. Some comparative experiments between the approach and traditional methods were performed using the two cases, DEM generation from point clouds and spatial intersection on vector data. The results not only demonstrate the advantage of the approach, but also provide hints on how traditional GIS computation can be improved by the AI machine learning.  相似文献   

Application of micropolar plasticity to post failure analysis in geomechanics     

Majid T. Manzari 《国际地质力学数值与分析法杂志》2004,28(10):1011-1032

A micropolar elastoplastic model for soils is formulated and a series of finite element analyses are employed to demonstrate the use of a micropolar continuum in overcoming the numerical difficulties encountered in application of finite element method in standard Cauchy–Boltzmann continuum. Three examples of failure analysis involving a deep excavation, shallow foundation, and a retaining wall are presented. In all these cases, it is observed that the length scale introduced in the polar continuum regularizes the incremental boundary value problem and allows the numerical simulation to be continued until a clear collapse mechanism is achieved. The issue of grain size effect is also discussed. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

基于中间件的遥感影像数据共享技术研究     

王连备 《测绘工程》2009,18(5):51-54

针对遥感影像共享服务的应用需求,提出基于中间件技术的影像数据共享方法;设计基于中间件技术的影像数据服务模式。通过实验实现支持多用户并发访问的服务原型,验证基于中间件技术的影像数据服务方法的可行性并给出进一步研究的方向。  相似文献   

BRINGING FORWARD OF THE CONCEPT OF COGIS AND ITS ARCHITECUTRE RESEARCH     

HUXue-lian CHENGCheng-qi WUDe-wen MAAi-nai 《中国地理科学(英文版)》2003,13(1):84-90

Based on the analysis of the development of GIS technology and application,this paper brought forward the concept of GoGIS,namely Cooperative GIS ,CoGIS is GIS facing group-users and supporting human-human interaction,which makes it differ from the former GISs,Then,the characteristics of general Computer Spport Cooperative Work (CSCW)applications and the complexity of Geographic Information Science were analyzed,and the conclusion the CoGIS was not a simple GIS layer on CSCW was reached,Further,this paper gaver the hierarchical architecture of CoGIS,and analyzed the coperative platform in detail from the following:1)basic elements;2) collaboration patterns;3) cooperation control mechanism;4) synchronization mechanism;5) security and 6) group communication and so on.With those,the problems about GIS applications are discussed,such as 1)distributed multi-source GIS information and knowledge sharing platform;2)the fusion and visualization of GIS information;3)virtual reality cooperative modeling;4) dymamic simulation;5)expert system and 6) decision-making.Finally,this paper analyzed CoGIS application mode in brief.  相似文献   

An explicit representation of steady state response of a beam on an elastic foundation to moving harmonic line loads     

Lu Sun 《国际地质力学数值与分析法杂志》2003,27(1):69-84

A closed‐form deflection response of a beam rest is presented in this paper using the integral transform method. The theory of linear partial differential equations is used to represent the deflection of beam subjected to a moving harmonic line load in integration form. The solution is finally carried out using the inverse Fourier transform. To evaluate the integration analytically, poles of the integrand are identified with the help of algebraic equation theory. Residue theorem is then utilized to represent the integration as a contour integral in the complex plane. Closed‐form deflections and numerical results are provided for different combinations of load frequency and velocity. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献