双酶法制备低黏度辛烯基琥珀酸淀粉钠的工艺条件   总被引：4，自引：0，他引：4  

阳元娥  罗发兴  黄强  谭伟 《广东海洋大学学报》2004,24(4):49-53

对双酶法制备用作微胶囊壁材的低黏度辛烯基琥珀酸淀粉钠的工艺路线与工艺条件进行了研究。正交实验结果表明 ,在酯化淀粉乳质量浓度 2 0 %、每 g淀粉α 淀粉酶的用量为 6SKBU的条件下 ,影响产品性能的各因素中 ,糖化酶的用量对产品的DE值和流度的影响最大 ,各因素的重要性依次是 :糖化酶的用量、糖化酶作用时间、α 淀粉酶保温作用时间。最佳工艺条件是 :α 淀粉酶保温作用时间 4min ,每 g淀粉糖化酶用量 0 .2GAU ,糖化酶作用时间 2 .5h ,此时产品的DE值为 30 ,流度为 80左右  相似文献   

Size and shape evolution of pores in a viscoplastic matrix under compression     

M. Berli  M. L. Accorsi  D. Or 《国际地质力学数值与分析法杂志》2006,30(12):1259-1281

The frequent use of soils and earth materials for hydraulic capping and for geo‐environmental waste containment motivated our interest in detailed modelling of changes in size and shape of macro‐pores to establish links between soil mechanical behaviour and concurrent changes in hydraulic and transport properties. The objective of this study was to use finite element analysis (FEA) to test and extend previous analytical solutions proposed by the authors describing deformation of a single macro‐pore embedded in linear viscoplastic soil material subjected to anisotropic remote stress. The FEA enables to consider more complex pore geometries and provides a detailed picture of matrix yield behaviour to explain shortcomings of approximate analytical solutions. Finite element and analytical calculations agreed very well for linear viscous as well as for viscoplastic materials, only limited for the case of isotropic remote stress due to the simplifications of the analytical model related to patterns and onset of matrix‐yielding behaviour. FEA calculations were compared with experimental data obtained from a compaction experiment in which pore deformation within a uniform modelling clay sample was monitored using CAT scanning. FEA predictions based on independently measured material properties and initial pore geometry provided an excellent match with experimentally determined evolution of pore size and shape hence lending credence to the potential use of FEA for more complex pore geometries and eventually connect macro‐pore deformation with hydraulic properties. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

甘新蒙北山地区成矿带划分和基本特征对比   总被引：3，自引：1，他引：2  

彭巨贵  张发荣  赵福昌 《地球科学与环境学报》2006,28(3):11-18

在对甘新蒙北山地区成矿地质背景和成矿在时空上的联系性等综合研究分析基础上,运用新理论、新认识,以板块构造单元划分为基础,将本区划分为3个Ⅲ级成矿带、11个Ⅳ级成矿带,并对Ⅲ级成矿带特征进行了阐述,以期为矿产勘查和地质大调查工作部署提供新的思路和依据。进一步就主要矿床(点)、构造单元、矿种、赋矿建造、控矿因素、成矿类型、成矿时代等方面进行了对比,认为各Ⅳ级成矿带在区域上具有相对稳定的展布范围,具有相同的构造环境和成矿条件、类似的矿种和成矿时代,存在一定的相似性、可比性,并且各成矿带具有一定的潜在找矿价值。  相似文献   

青海省沙柳河南区有色金属矿成矿物质来源及矿床成矿模式探讨     

马永铨  姜洪成 《青海国土经略》1994,(1)

本文简述了沙柳河南区有色金属矿床的基本特征。通过对成矿热液及成矿物质的来源与性质的研究,认为该矿床的成因类型为火山沉积—接触交代改造叠加型,进而探讨了该矿床的成矿模式。  相似文献   

凤太矿田层控铅锌(铜)矿床的成矿物质来源探讨     

隗合明  吕仁生 《地球科学与环境学报》1990,(1)

秦岭凤太矿田层控铅锌(铜)矿床的金属物质、硫和成矿溶液主要来自深部基底的岩石,属海底喷流—沉积成因矿床。从这一理论认识出发可进一步分析控矿地质条件及今后在该区有效地寻找同类矿床。  相似文献   

Motive force of Qinghai-Tibet Plateau moving to east     

YANG Dong-hong  YANG Xue-xiang  CHEN Dian-you 《世界地质(英文版)》2005,8(1)

A calculation formula on spherical pattern of Qinghai-Tibet plateau moving model is established. Tibet massif moves norward by east in speed of 28 mm/a, Ganshu-Qinghai massif moves to northeast in speed of 15 mm/a, Qomolangma Feng moves northward by a few east in speed of 35 ～42 mm/a. The low latitude perimeter is longer than the nigh latitude perimeter. When the Tibet massif moves northward, its latitude perimeter must be contracted and the Tibet massif must move eastward by Coriolis. Coriolis force is inertial in earth rotation. It makes the fall body turning to east and the rising block turning westward. In the Northern Hemisphere, it makes the northward body turning to east and the southward block turning to west.This is the reason why the tectonic zones of western Pacific are different from those of eastern Pacific.  相似文献   

滇西北保山核桃坪铅锌矿床成矿流体来源的同位素地球化学证据   总被引：11，自引：2，他引：9  

薛传东  韩润生  杨海林  杨志明  田世洪  刘勇强  郝百武 《矿床地质》2008,27(2):243-252

滇西北核桃坪铅锌矿是保山地块内沿澜沧江断裂带发育的一个大型铅锌多金属矿床,矿体严格受近SN向的断裂带及层间破碎带控制,赋存于上寒武统核桃坪组和沙河厂组大理岩化灰岩及矽卡岩中。文章在分析矿床地质特征的基础上,通过对V1矿体的氢、氧、碳、硫、硅和铅同位素地球化学的示踪研究,探讨了成矿溶液中水、碳、硅、硫和铅的来源以及成矿流体的演化问题。研究表明,V1矿体中矿石的石英δ18O水值变化范围为6·1‰~7·6‰,平均为6·7‰,其δDV-SMOW值变化范围为-100‰~-108‰,平均为-104‰,说明成矿流体主要来自深部岩浆分异水,并在后期成矿作用过程中有地层建造水和大气降水的加入;矿石中方解石的δ13CV-PDB和δ18O水值分别为-6·6‰~-5·9‰和5·0‰~5·2‰,反映成矿流体的碳、氧具有深部流体与围岩发生交代反应的特征。硅、硫和铅同位素具深部岩浆或地幔来源的特点,但遭受后期壳源物质的混染。据此提出该矿床是与深部岩浆热液或幔源流体贯入有关的构造热液脉型矿床,其成矿作用受控于深部过程的驱动和控制,可为指导地质找矿提供依据。  相似文献   

湘中奥陶纪锰矿带成矿特征及资源前景     

彭三国  付群和  张殿春 《矿床地质》2008,27(5):622-630

湘中奥陶纪沉积锰矿带位于湖南省安化县、桃江县、宁乡县境内,呈近EW向展布,矿带内锰矿以质量好而著称。该成矿带的成锰沉积盆地受控于加里东期张性断裂系统,为一断陷盆地。盆地内发育一组NW向同沉积断裂,形成了一系列断陷槽,控制了沉积岩相的分布。锰矿主要产于盆地中心亚相的黑色页岩夹碳酸锰矿微相内。据矿带中锰矿的地质和地球化学特征以及微量元素和碳、氧、锶同位素组成,笔者认为,该锰矿属于热水沉积成因。综合对比表明,该成矿带具有良好的成矿条件和值得注意的资源潜力,有可能发展为大型锰成矿带。  相似文献   

Biaxial test simulations using a packing of polygonal particles   总被引：1，自引：0，他引：1  

A. A. Peña  A. Lizcano  F. Alonso‐Marroquin  H. J. Herrmann 《国际地质力学数值与分析法杂志》2008,32(2):143-160

The mechanical response of cohesionless granular materials under monotonic loading is studied by performing molecular dynamic simulations. The diversity of shapes of soil grains is modelled by using randomly generated convex polygons as granular particles. Results of the biaxial test obtained for dense and loose media show that samples achieve the same void ratio at large strains independent of their initial density state. This limit state resembles the so‐called critical state of soil mechanics, except for some stress fluctuations, which remain for large deformations. These fluctuations are studied at the micro‐mechanical level, by following the evolution of the co‐ordination number, force chains and the fraction of the sliding contacts of the sample. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

空间刚架结构极限强度分析     

刘修禾 《海洋工程》1997,(3)

本文用理想结构单元法对空间刚架结构进行了极限强度分析，理想结构单元法在于将结构分成最大可能的单元。以简单的形式归并几何非线性与材料非线性。按增量形式加载，直到达到极限强度。本文根据Ｒａｓｈｅｄ理论导出了对称的切向方程组，节省了存贮单元、改善了破坏准则的描述。算例结果与非线性有限单元法结果十分吻合。  相似文献