CARBON DYNAMICS OF WETLAND IN THE SANJIANG PLAIN   总被引：2，自引：0，他引：2  

SONG Chang-chun    WANG Yi-yong  WANG Yue-si  YAN Bai-xing WANG De-xuan  ZHAO Zhi-chun  LOU Yan-jing 《中国地理科学(英文版)》2003,13(3):228-231

1INTRODUCTIONWetlandsplayanimportant roleintheprocessofcar-bonstorage.Thetotalcarbonstoredindifferentkindsofwetlandsisabout15%-35%ofthetotalcarboninthegloballandsoils(POSTetal.,1982;GORHAM,1991).Inaddition,wetlandsaresignificantnaturalsources fortheatmospheric CH4 (MOORE,1994).It isestimatedthatabout110×1012gCH4 originates fromanaerobicdecompositioninthenaturalwetlands,CH4 emission fromthenaturalwetlandsis15%-30%oftheglobalCH4 emission andtheCH4 emission from thepeat land at hi…  相似文献   

A 3D finite element simulation model for TBM tunnelling in soft ground     

Thomas Kasper  Günther Meschke 《国际地质力学数值与分析法杂志》2004,28(14):1441-1460

  相似文献   

不同软基处理方法适用性比较   总被引：8，自引：0，他引：8  

熊丛博  于定勇 《海岸工程》2003,22(1):20-26

总结分析了国内外现有的软土地基处理的各种方法。通过对采用不同方法进行软基处理的工程实例处理效果的定量对比，发现不同软基处理方法的适用性差异很大，多数工程中仅用一种方法很难达到设计要求，而两种或多种方法联合则可望取得更好的效果。  相似文献   

海上浮动软管的三维静态分析     

孟浩龙  张海明等 《海洋工程》2003,21(1):109-112

提出了海上浮动软管的三维静态分析模型。在四级海情下，对输送柴油的软管求得了解析解，得出了软管在侧向和垂直方向的偏移及其所受的拉力，认为此时的软管是不安全的。  相似文献   

共转换点道集的抽取与转换波时变静校正   总被引：1，自引：0，他引：1  

何兵寿  张会星  彭苏萍 《海洋地质与第四纪地质》2006,26(6):139-144

纵横波速度比固定时,同一地震道中各时间采样点对应不同的转换点位置,因此,常规的整体抽道方法只能抽取特定深度或特定层位条件下的共转换点道集,它不能保证所有P-SV转换波的反射点位置都在同一水平位置处。提出了一种精确抽取共转换点道集的新方法,运用这种方法抽取的共转换点道集中所有数据对应的转换点在地面的投影都对应于同一位置,因此,该道集是一种真正意义上的共转换点道集,在此基础上提出了一种解决短波长问题的转换波时变静校正方法,实际资料处理取得了好的效果。  相似文献   

Fast static correction methods for high-frequency multichannel marine seismic reflection data: A high-resolution seismic study of channel-levee systems on the Bengal Fan     

Martin Gutowski  Monika Breitzke  Volkhard Spieß 《Marine Geophysical Researches》2002,23(1):57-75

Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method.  相似文献   

双船中层拖网网位控制的静力学解析   总被引：1，自引：0，他引：1  

万荣  朱文斌  何鑫  崔勇  刘莉莉 《中国海洋大学学报(自然科学版)》2007,37(1):61-64,6

中层拖网是开发利用中上层鱼类资源的重要工具之一,能否有效实施对拖网作业水层的控制,是实现瞄准捕捞和提高捕捞生产效率的关键。本文提出了1种基于有限元原理的拖网曳纲形状与张力的理论计算方法,以期依据中层拖网拖曳过程中不同拖速、曳纲长度和重锤配备条件下曳纲响应的计算机模拟结果,预测拖网可能的作业水层,以实现中层拖网网位控制,为中层拖网曳纲设计和网位调整提供理论依据。  相似文献   

Effect of Multipoint Heterogeneity on Nonlinear Transformations for Geological Modeling： Porosity-Permeability Relations Revisited     

J A Vargas-Guzmán 《中国地质大学学报(英文版)》2008,19(1):85-92

An analysis of statistical expected values for transformations is performed in this study to quantify the effect of heterogeneity on spatial geological modeling and evaluations. Algebraic transformations are frequently applied to data from logging to allow for the modeling of geological properties. Transformations may be powers, products, and exponential operations which are commonly used in well-known relations (e.g., porosity-permeability transforms). The results of this study show that correct computations must account for residual transformation terms which arise due to lack of independence among heterogeneous geological properties. In the case of an exponential porosity-permeability transform, the values may be positive. This proves that a simple exponential model back-transformed from linear regression underestimates permeability. In the case of transformations involving two or more properties, residual terms may represent the contribution of heterogeneous components which occur when properties vary together, regardless of a pair-wise linear independence. A consequence of power- and product-transform models is that regression equationswithin those transformations need corrections via residual cumulants. A generalization of this result isthat transformations of multivariate spatial attributes require multiple-point random variable relations. This analysis provides practical solutions leading to a methodology for nonlinear modeling using correct back transformations in geology.  相似文献   

全程注浆在隧道穿越既有建筑物中的试验研究   总被引：6，自引：0，他引：6  

逢铁铮 《岩土力学》2008,29(12):3451-3458

厦门市成功大道工程是福建省2005年重点建设项目,项目由多座立交和两条特长城市隧道组成,其中莲前至梧村山隧道里程长度为3 700 m,采用双洞双向6车道标准.隧道在埔南工业区的685 m段采用跨度达34 m的浅埋连拱结构穿越地面67栋密集建构筑物.洞项至地表的覆盖层只有7～24 m,水文、地质较差,洞顶基本为杂填土和残积亚黏土层,洞底多为全、强风化花岗岩,地下饱和水位高(局部洞身地处海平面以下20 m左右),施工风险极大.为了保证既有地面建构筑物的安全,提出了以过程控制和过程恢复为核心的全过程注浆方案,并预留104#和105#拆迁房为试验楼,采取地面注浆和洞内注浆的方法来进行过程控制和房屋抬升的试验.在现场试验中,根据全过程注浆的思路,提出了建筑物安全风险控制标准.通过室内试验比较了不同浆液的注浆效果,分析实际施工中房屋摹础改造和地基注浆加固、动态跟踪注浆以及工后房屋恢复抬升的特点和效果.在注浆过程中进行实时的信息反馈和分析,进而了解注浆工艺和参数与地层加崮效果和建筑物抬升效果之间的关系,得出了一系列有意义的结论.试验结果为隧道后续穿越建构筑物施工提供经验和指导,研究思路可为类似的隧道穿越工程提供一定的参考.  相似文献   

一种时空数据静态可视化表达方法   总被引：1，自引：0，他引：1  

夏慧琼  李德仁  邵振峰  郑春燕 《测绘科学》2008,33(6):116-118,124

本文简要介绍了时空数据可视化的必要性,以及目前人们采用的时空数据可视化方法,并分析了这些方法的局限性,提出了一种将年轮(annual ring)作为时空载体,结合视觉变量对面状地物的属性数据进行静态可视化的方法。该方法将面状地物的同心环按照类似树木年轮的生长特征进行划分,作为空间和时间的载体,不同时期属性数据映射到相应的同心环中,同心环的厚度和色彩的差异揭示了属性数据的变化。最后以武汉市城市管理网格化平台的统计评价数据为例实现了对比率量表数据的时态可视化表达。本文所提出的静态时空可视化方法将面状地物的空间、属性和时间紧密地结合在一起,克服了以往静态可视化方法中时间-空间、时间-属性相分离的不足,试验证明了这种方法在实践中的可行性。  相似文献