水平定向钻进非开挖铺管技术市场分析     

袁明昕 《探矿工程》2008,35(10):49-51

重点分析了近几年我国水平定向钻进铺管钻机和施工市场的发展趋势,结合国外的水平定向钻进市场发展分析,总结了我国水平定向钻进技术与市场的发展态势。  相似文献   

Improved precision of acoustic surveys of benthopelagic fish by means of a deep-towed transducer     

Kloser  Rudy J. 《ICES Journal of Marine Science》1996,53(2):407-413

  相似文献   

清淤输泥的新方法新设备     

陶松垒  王康林  陶钧炳  谢远富  周良荣 《海洋学研究》2006,24(Z1):113-120

为解决中低滩涂沉积的深厚软粘土层的输送难题,提出了一种清淤输泥的新方法,研制了能远距离输送高浓度、大粘度、低含水量的淤泥和软粘土的土方施工新设备:包括进料口、推送器、表面膜发生器、脉冲切割器、定位系统、智能控制系统、输料管道、管道浮子等。该设备具有能耗低,工效高,效益好;结构简单,故障少,运行维护方便;定位准确性高;自动化程度高等特点。可广泛应用于水利、环保、建筑工程中的淤泥和软粘土输送。  相似文献   

Experimental investigation on a two-part underwater towed system     

Jiaming Wu  Allen T. Chwang 《Ocean Engineering》2001,28(6)

An experimental set-up is developed and proved to be effective for laboratory study of an underwater towed system. The experimental technique gives a practical method for monitoring the kinematic and dynamic performance of an underwater towed system in a ship towing tank. Both the theoretical and experimental results in the investigation indicate that the hydrodynamic response of a towed vehicle to the wave induced motion of a towing ship can be significantly reduced by applying a two-part tow method. A comparison of the numerical and experimental results in the investigation demonstrates that the numerical simulation results are close to the experimental data, overall agreement between experimental and theoretical results is satisfactory. The results qualitatively verify the mathematical model of a two-part underwater towed system proposed by Wu and Chwang [Wu, J., Chwang, A.T., 2000. A hydrodynamic model of a two-part underwater towed system. Ocean Engineering 27 (5), 455–472].  相似文献   

主动式声纳列阵拖曳系统姿态数值计算   总被引：2，自引：1，他引：2  

卢军 《海洋工程》2001,19(3):85-90

主动式声纳列阵拖曳系统是用于探测潜艇的新型声纳系统，为了准确探测潜艇的位置，必须首先预报声纳列阵的瓷态，本文通过对其三维力学模型的分析，得到该系统的运动微分方程，其中缆索的力学方程是基于Ablow和Milinazzo的模型，而对于拖体则运用六自由度空间运动方程模拟，结合边界条件，用有限差分法求解，通过对拖船的不同运动状态如匀速，变速和回转的计算，证明本文的方法对于预报声纳列阵的姿态是有效的。  相似文献   

VS型垂直摆倾斜仪的安装调试与标定要点   总被引：1，自引：0，他引：1  

秦家林  佟国刚 《东北地震研究》2002,18(3):20-21

本文总结了铁岭地震台安装，调试与标定VS型垂直倾仪的经验。  相似文献   

省级空间信息基础设施建设的意义及途径--以西藏自治区为例     

陶和平  刘淑珍  曹宗杰 《山地学报》2003,21(Z1):118-122

省级空间信息基础设施建设是实现信息化资源、经济、环境管理的基础,但省级空间信息基础设施发展是一项具有战略性的巨型系统工程,跨区域、跨部门、跨学科,其建设和部署必须有统一的领导和安排。文章以西藏自治区为例,根据西藏自治区目前信息化发展现状,探讨了西藏自治区省级空间信息基础设施建设的途径及意义,认为西藏省级空间信息基础设施建设的第一步是提出项目建设的框架及规划,其次根据信息化发展现状及投资力度,制订近期、中长期目标及建设内容,然后根据规划分阶段实施。最后文章讨论了西藏实施省级空间信息的重要意义,为实现西藏电子政府、指导区域经济发展提供依据。  相似文献   

高寒富水地区-西藏那曲镇给水管道的安装及维修     

曾小东 《地质灾害与环境保护》2003,14(2):76-78

西藏那曲镇是全世界海拔最高、含氧量最稀薄、最后一个安装自来水的地级城市。那曲镇海拔高度为4500m，冻土层深达2．8m，地下水丰富，基础开挖超过lm时就有地下水渗出，且土质多为流沙型，施工时容易引起塌方，施工环境恶劣。本文就那曲镇的具体情况介绍一下给水管道的安装及维修。  相似文献   

导向钻进非开挖铺管技术   总被引：5，自引：0，他引：5       下载免费PDF全文

王鹏  王洪龄  周升风  张雅春  李济武 《探矿工程》1996,(6):16-18

介绍了导向钻进非开挖铺管技术的工作原理，施工技术和工程施工实例，总结出一套导向孔轨迹设计和钻进方向控制的方法，并对我国的导向钻进非开挖技术的发展提出了建议。  相似文献   

Compression limit state of HVAC submarine cables     

《Applied Ocean Research》2016

An industry accepted standard does not currently exist for determination of compression limits in a subsea cable. This has resulted in most manufacturers specifying that subsea cables are not permitted to be axially loaded in compression.Additionally industry guidance does not exist regarding the consequences of inducing compression forces within subsea cables and the resulting effect on cable integrity. Industry recommended practice and guidance also does not have any information regarding experimental test arrangements to determine allowable compression levels within a subsea cable. This lack of modelling/testing guidance along with manufacturer recommendations of zero compressive loads within subsea cables results in overly conservative and restrictive design parameters for subsea cable installation and use.Due to the complex interaction within a subsea cable structure, such as contact interaction and friction between cable strands, theoretical modelling has been unable to provide reliable stress predictions and therefore an experimental testing regime is required if compression limits within the cable are to be appropriately determined. This paper describes combined axial and bending test arrangements that can be used as a guideline for determination of allowable compression limits for subsea cables.  相似文献