排序方式： 共有32条查询结果，搜索用时 31 毫秒
1.
Sediments contained in the river bed do not necessarily contribute to morphological change. The finest part of the sediment mixture often fills the pores between the larger grains and can be removed without causing a drop in bed level. The discrimination between pore‐filling load and bed‐structure load, therefore, is of practical importance for morphological predictions. In this study, a new method is proposed to estimate the cut‐off grain size that forms the boundary between pore‐filling load and bed‐structure load. The method evaluates the pore structure of the river bed geometrically. Only detailed grain‐size distributions of the river bed are required as input to the method. A preliminary validation shows that the calculated porosity and cut‐off size values agree well with experimental data. Application of the new cut‐off size method to the river Rhine demonstrates that the estimated cut‐off size decreases in a downstream direction from about 2 to 0·05 mm, covariant with the downstream fining of bed sediments. Grain size fractions that are pore‐filling load in the upstream part of the river thus gradually become bed‐structure load in the downstream part. The estimated (mass) percentage of pore‐filling load in the river bed ranges from 0% in areas with a unimodal river bed, to about 22% in reaches with a bimodal sand‐gravel bed. The estimated bed porosity varies between 0·15 and 0·35, which is considerably less than the often‐used standard value of 0·40. The predicted cut‐off size between pore‐filling load and bed‐structure load (Dc,p) is fundamentally different from the cut‐off size between wash‐load and bed‐material load (Dc,w), irrespective of the method used to determine Dc,p or Dc,w. Dc,w values are in the order of 10?1 mm and mainly dependent on the flow characteristics, whereas Dc,p values are generally much larger (about 100 mm in gravel‐bed rivers) and dependent on the bed composition. Knowledge of Dc,w is important for the prediction of the total sediment transport in a river (including suspended fines that do not interact with the bed), whereas knowledge of Dc,p helps to improve morphological predictions, especially if spatial variations in Dc,p are taken into account. An alternative to using a spatially variable value of Dc,p in morphological models is to use a spatially variable bed porosity, which can also be predicted with the new method. In addition to the morphological benefits, the new method also has sedimentological applications. The possibility to determine quickly whether a sediment mixture is clast‐supported or matrix‐supported may help to better understand downstream fining trends, sediment entrainment thresholds and variations in hydraulic conductivity. 相似文献
2.
华北地区石盒子群的沉积环境长期以来一致存在较大的争议,大多数研究者认为该时期完全为陆相沉积,也有一些学者在该地层中发现了海相沉积物。本文着重对鲁西、河南等地区石盒子群的奎山砂岩进行岩石学、沉积学、地球化学等指标研究,在该砂岩中发现了冲洗交错层理,并在该砂岩中上部发现了海绿石的存在。通过详细分析奎山砂岩中海绿石的显微特征、元素地球化学特征,并进行比较研究发现,华北地区奎山砂岩中海绿石的化学成分、含量与国内外古代的海相、过渡相海绿石基本一致,推断其为滨浅海富氧环境的产物。华北地区奎山砂岩中发育的沉积构造和所含海绿石的元素地球化学特征,揭示了该时期曾发生过海侵,反映了石盒子群沉积期沉积环境的复杂性。华北地区石盒子群奎山砂岩中上部海相沉积环境的确定,可能改变华北盆地二叠纪以来单纯为陆相沉积的认识,这为精细研究华北地区中晚二叠世的盆地格局、充填演化及恢复古地理景观,提供了新的思路和重要依据。 相似文献
3.
渤海湾曹妃甸深槽海区地形地貌特征及控制因素 总被引：2，自引：2，他引：0
通过研究浅层地震剖面、侧扫声纳和水深地形等数据资料,得出,曹妃甸沙岛的岬角地貌引起深槽海域局部潮流流速增大,甸头前沿深槽区以冲刷为主,最大水深达42 m,刷新了渤海湾最大水深记录,深槽部位的侵蚀量最大,深槽南坡冲刷幅度大于北坡,工程建设后期深槽区侵蚀冲刷程度有变小变缓趋势。早期深槽的形成是由于浅部断层受深部构造影响发生阶梯状错断沉陷,海底地层形成古凹槽,但深槽海底地层沉陷速率略大于沉积速率,使得深槽海域长期保持了渤海湾最大的水深环境。初步得出在历史时期曹妃甸深槽经过2万a以上长期存在,深槽的走向经历了南北向-北东向-北西向的转化过程。认为地质构造、古滦河三角洲演变、海洋水动力作用和人类活动等内外营力作用共同控制了曹妃甸海区地貌体系的发育与演化。达到了研究渤海湾曹妃甸深槽海区地形地貌控制因素和深槽的地质演化的目的,为曹妃甸港的规划、运营期维护和未来发展提供科学依据具有重要意义。 相似文献
4.
福山凹陷流沙港组致密砂岩是海南福山油田勘探开发的重要目标之一。受复杂构造演化影响,该区致密砂岩具有砂泥薄互层明显、低孔低渗、高温等特征,为了解决以往储层改造中经常出现的施工压力高、缝高失控、砂堵、单井产量低、压裂后产量下降快等问题。借鉴非常规体积压裂技术,采用变排量、人工隔层控缝高、暂堵转向等工艺,同时进一步优化压裂液,应用纳米增效洗油剂,在福山油田致密砂岩开展了4口井次试验。研究结果表明：非常规体积压裂技术可有效降低砂堵风险,提高福山油田致密砂岩储层的改造效果。变排量、人工隔层控缝高、暂堵转向压裂等储层改造工艺的实施,有效控制了缝高,提高了储层的压开程度。纳米增效洗油剂的应用,最大限度地降低了液体对地层和裂缝的伤害,发挥了纳米液滴渗吸洗油作用,增加了油气井的稳产期。 相似文献
5.
Wildfires raise concerns over the risk of accelerated erosion as a result of increased overland flow and decreased protection of the soil by litter and ground vegetation cover. We investigated these issues following the 1994 fires that burnt large areas of native Eucalyptus forest surrounding Sydney, Australia. A review of previous studies identifies the fire and rainfall conditions that are likely to lead to increased runoff and accelerated erosion. We then compare runoff and erosion between burnt and unburnt sites for 10 months after the 1994 fires. At the scale of hillslope plots, the 1994 fire increased runoff by enhancing soil hydrophobicity, and greatly increased sediment transport, mainly through the reduced ground cover, which lowered substantially the threshold for initial sediment movement. However, both runoff and sediment transport were very localized, resulting in little runoff or sediment yield after the fire at the hillslope catchment scale. We identify that after moderately intense fires, rainfall events of greater than one year recurrence interval are required to generate substantial runoff and sediment yield. Such events did not occur during the monitoring period. Past work shows that mild burns have little effect on erosion, and it is only after the most extreme fires that erosion is produced from small, frequent storms. © 1998 John Wiley & Sons, Ltd. 相似文献
6.
The effects of wetlands on hydrology, water quality, and wildlife habitat are internationally recognized. Protecting the remaining wetlands is one of the most important environmental issues in many countries. However wetlands in Japan have been gradually shrinking due to agricultural development and urbanization, which generally lowers the groundwater level and introduces suspended sediment and sediment-associated nutrients into wetlands. We examined the influences of channelization on discharge of suspended sediment and wetland vegetation in Hokkaido, northern Japan. The impact of river channelization was confirmed not only by the sediment budgets but also by river aggradation or degradation after the channelization and by the resultant vegetational changes. The budgets of suspended sediment demonstrated that wash load was the predominant component accounting for 95% of the total suspended load delivered into the wetland. This suspended sediment was primarily transported into the wetland by flooding associated with heavy rainfall. Twenty-three percent of the wash load and 63% of the suspended bed material load were deposited in the channelized reach, which produced aggradation of about 2 m at the end of the reach. A shorting of the length of the channel, due to channelization of a meandering river, steepened the slope and enhanced the stream power to transport sediment. This steepening shifted the depositional zones of fine sediment 5 km downstream and aggraded the riverbed. Development of the watershed may increase not only the water discharge but also the amount of suspended sediments. The aggradation reduced the carrying capacity of the channel and caused sediment ladened water to flood over the wetlands. The fine sediment accumulated on the wetlands gradually altered the edaphic conditions and wetland vegetation. A low percentage (10 to 15%) of organic contents of wetlands' soil is more evidence indicating that the present condition is far different from normal. Original vegetation such as sedges and Alnus japonica were disappearing from the adjacent areas of the river channel and were being replaced by willow trees (Salix spp.). 相似文献
7.
For most of the year, a dry‐bed desert wash is void of water flow. Intensive rain events, however, could trigger significant flash floods that bring about highly complicated hydrodynamics and morphodynamics processes within a desert stream. We present a fully coupled three‐phase flow model of air, water, and sediment to simulate numerically the propagation of a flash flood in a field‐scale fluvial desert stream, the so‐called Tex Wash located in the Mojave Desert, California, United States. The turbulent flow of the flash flood is computed using the three‐dimensional unsteady Reynolds‐averaged Navier–Stokes equations closed with the shear stress transport k ? ω model. The free surface of the flash flood at the interface of air and water phases is computed with the level‐set method, which enables instantaneous tracking of the water surface as the flash flood propagates over the dry bed of the desert stream. The evolution of the desert fluvial stream's morphology, due to the action of the propagating flash flood on the mobile bed, is calculated using a Eulerian morphodynamics model based on the curvilinear immersed boundary method. The capabilities of the proposed numerical framework are demonstrated by applying it to simulate a flash flood event in a 0.65‐km ‐long reach of the Tex Wash, the intricate channel morphology of which is obtained using light imaging detection and ranging technology. The simulated region of the stream includes a number of bridge foundations. The simulation results of the model for the flash flood event revealed the formation of a highly complex flow field and scour patterns within the stream. Moreover, our simulation results showed that most scour processes take place during the steady phase of the flash flood, that is, after the flash flood fills the stream. The transient phase of the flash flood is rather short and contributes to a very limited amount of erosion within the desert stream. 相似文献
8.
广州华南快速路工程有若干座桥梁，采用钻(冲)孔灌注桩基础，共112根，桩径10、15及18 m三种，桩长44~51 m，由于地质条件变化大，部分地层中有断层夹泥与溶洞等不良地质，主桥桩基位于深约8 m的水中，具有一定的施工难度。对其施工方法与技术措施作了介绍。 相似文献
9.
O. Malam Issa Y. Le Bissonnais O. Planchon David Favis‐Mortlock Norbert Silvera John Wainwright 《地球表面变化过程与地形》2006,31(8):929-939
Field‐ and laboratory‐scale rainfall simulation experiments were carried out in an investigation of the temporal variability of erosion processes on interrill areas, and the effects of such variation upon sediment size characteristics. Poorly aggregated sandy soils from the semi‐arid environment of Senegal, West Africa, were used on both a 40 m2 field plot and a 0·25 m2 laboratory plot; rainfall intensity for all experiments was 70 mm h?1 with a duration of 1 to 2 hours. Time‐series measurements were made of the quantity and the size distribution of eroded material: these permitted an estimate of the changing temporal balance between the main erosion processes (splash and wash). Results from both spatial scales showed a similar temporal pattern of runoff generation and sediment concentration. For both spatial scales, the dominant erosional process was detachment by raindrops; this resulted in a dynamic evolution of the soil surface under raindrop impact, with the rapid formation of a sieving crust followed by an erosion crust. However, a clear difference was observed between the two scales regarding the size of particles detached by both splash and wash. While all measured values were lower than the mean weight diameter (MWD) value of the original soil (mean 0·32 mm), demonstrating the size‐selective nature of wash and splash processes, the MWD values of washed and splashed particles at the field scale ranged from 0·08 to 0·16 mm and from 0·12 to 0·30 mm respectively, whereas the MWD values of washed and splashed particles at the laboratory scale ranged from 0·13 to 0·29 mm and from 0·21 to 0·32 mm respectively. Thus only at the field scale were the soil particles detached by splash notably coarser than those transported by wash. This suggests a transport‐limited erosion process at the field scale. Differences were also observed between the dynamics of the soil loss by wash at the two scales, since results showed wider scatter in the field compared to the laboratory experiments. This scatter is probably related to the change in soil surface characteristics due to the size‐selectivity of the erosion processes at this spatial scale. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
10.
对于石灰岩地层出水量小于5m^3／h的机井，采取单一的洗井增水方法效果一般不明显。笔者经过多年的研究与应用，提出了先对井孔进行爆破，然后利用盐酸与二氧化碳联合洗井的综合洗井增水技术，则往往能够取得较好的增水效果．一般增水率在60％以上。该项技术为石灰岩山区小水量的机井的开发提供了技术保证，具有广阔的发展应用前景。 相似文献