排序方式： 共有6条查询结果，搜索用时 31 毫秒
1
1.
整体式止屈器可有效抑制海底管道屈曲传播并避免管道的大规模屈曲失效。为探究整体式止屈器的止屈特性,预测其穿越压力,利用ABAQUS软件建立有限元模型,分析了整体式止屈器厚度、长度、径厚比等参数对穿越压力和穿越形式的影响机制,揭示了整体式止屈器的止屈特性。研究结果表明:在平行穿越阶段,增加止屈器厚度、有效长度可明显提升穿越压力;而在垂直穿越阶段,穿越压力增长速率明显放缓。结合有限元模拟结果,拟合得到了整体式止屈器在不同穿越形式下的穿越压力预测公式,其相较于已有经验公式准确性更高,对整体式止屈器的设计和建造具有重要的指导意义。 相似文献
2.
Local buckling of submarine pipelines is unavoidable under extreme conditions and it can propagate along the pipeline. Thus, arrestors are installed in a periodic placement along the pipeline to limit the extent of catastrophic collapse between two adjacent arrestors. Generally, the integral buckle arrestors are crossed by two modes: the flattening mode and the flipping mode. This paper focuses on the cross-over mechanisms of arrestors by analyzing results from experiments and numerical simulations. Fifteen groups of full-scale and reduced-scale physical experiments are conducted to investigate the effect of local ovality of the downstream pipes on the arrestor performance. Furthermore, an extensive parametric study of cross-over modes of arrestors is performed by FE models to supplement the experimental results. It is found that the local ovality of the downstream pipes impacts the cross-over modes of integral buckle arrestors, which is more likely to deform by ovalization in the same sense as the local ovality. On the other hand, a new formula involving the major geometric and material characteristics of pipes and arrestors is proposed to estimate the flattening mode and the flipping mode of arrestors when the downstream pipes are intact. And the switch point of the two cross-over modes is 0.265. 相似文献
3.
海底管道是海洋石油主要的运输方式,但海底管道在外部静水压力作用下很可能发生局部屈曲压溃,造成灾难性后果。安装止屈器可有效阻止屈曲传播,保证管道安全,整体式止屈器在实际中应用最为广泛。整体式止屈器存在通过减小止屈器体积以节约成本进行优化的可能性,因此,在保证止屈器止屈效果的前提下,可通过减小止屈器的体积,以达到减轻重量、节约成本、减少安装难度等多种目的。研究过程中使用ABAQUS进行模型的仿真模拟,比较了广义弧长法的优缺点,决定选用更方便的静水流体单元法,计算得到不同止屈器的穿越压力以及相应的体积,对比各止屈器的穿越压力变化和体积变化,实现结构优化的目标。基于以上研究,可以得出减少止屈器体积的结构优化方案具有可行性的结论。 相似文献
4.
5.
For exact estimation of efficiency of a buckle arrestor,it is necessary to take the effect ofstructural inertia into account in the analysis of buckle propagation on elastic structures after meetingarrestors.Under this consideration,this paper deals with the dynamics of buckle arrest and its numerica1simulation on the basis of the beam system model used by Chater and Hutchinson(1983).The FEM com-bined with an improving arc-length control method is adopted to solve the dynamic equations describingthe arresting of buckle propagation. A new group of parameters for arrestor design which differs greatlyfrom that by the quasi-static analysis is obtained.The present results support the conclusion that the iner-tia of the beam cannot be neglected in such analysis. 相似文献
6.
1