排序方式： 共有47条查询结果，搜索用时 15 毫秒
1.
Chad Trabant Clifford Thurber William Leith 《Physics of the Earth and Planetary Interiors》2002,131(2):155-171
We utilized nuclear explosions from the Degelen Mountain sub-region of the Semipalatinsk Test Site (STS), Kazakhstan, to assess seismic location capability directly. Excellent ground truth information for these events was either known or was estimated from maps of the Degelen Mountain adit complex. Origin times were refined for events for which absolute origin time information was unknown using catalog arrival times, our ground truth location estimates, and a time baseline provided by fixing known origin times during a joint hypocenter determination (JHD). Precise arrival time picks were determined using a waveform cross-correlation process applied to the available digital data. These data were used in a JHD analysis. We found that very accurate locations were possible when high precision, waveform cross-correlation arrival times were combined with JHD. Relocation with our full digital data set resulted in a mean mislocation of 2 km and a mean 95% confidence ellipse (CE) area of 6.6 km2 (90% CE: 5.1 km2), however, only 5 of the 18 computed error ellipses actually covered the associated ground truth location estimate. To test a more realistic nuclear test monitoring scenario, we applied our JHD analysis to a set of seven events (one fixed) using data only from seismic stations within 40° epicentral distance. Relocation with these data resulted in a mean mislocation of 7.4 km, with four of the 95% error ellipses covering less than 570 km2 (90% CE: 438 km2), and the other two covering 1730 and 8869 km2 (90% CE: 1331 and 6822 km2). Location uncertainties calculated using JHD often underestimated the true error, but a circular region with a radius equal to the mislocation covered less than 1000 km2 for all events having more than three observations. 相似文献
2.
本文基于宾川气枪地震信号发射台激发的地震波信号,利用线性叠加和时频域相位加权叠加方法提高信噪比,通过反褶积、插值拟合和波形互相关等方法,获得2021年漾濞M;6.4地震前后气枪震源初至波信号走时变化特征.结果表明两种叠加方法得到的走时变化趋势基本一致,在沿发震断裂带附近的3个台站观测到的初至波走时延迟为7.3~14.4 ms,在射线路径上平均波速降低了0.08%~0.12%,距离震中位置较远的台站走时延迟为2~6 ms.分析认为,观测到的走时变化主要是漾濞M;6.4地震引起强地面运动造成浅层介质疏松、同震破裂导致震源区地下介质裂隙增加和地下流体侵入等共同作用造成,相关研究成果有助于加深和促进对此次地震震源物理过程的认识和了解. 相似文献
3.
《地震研究进展（英文）》2021,1(4):100035
Detecting subsurface fault structure is important for evaluating potential earthquake risks associated with active faults. In this study, we propose a new method to detect faults using reflected surface waves observed in ambient noise cross correlation functions. Ambient noise tomography using direct surface waves obtained from ambient noise interferometry has been widely used to characterize active fault zones. In cases where a strong velocity contrast exists across the fault interface, fault-reflected surface waves are expected. We test this idea using a linear array deployed in the Suqian segment of Tanlu fault zone in Eastern China. The fault-reflected surface waves can be clearly seen in the cross-correlation functions of the ambient noise data, and the spatial position of the fault on the surface is close to the stations where the reflected signals first appear. Potentially reflected surface waves could also be used to infer the dip angle, fault zone thickness and the degree of velocity contrast across the fault by comparing synthetic and observed waveforms. 相似文献
4.
收集了南北地震带区域地震台网中292个地震台站2008年1月至2011年3月期间的地震波形数据,由频时分析方法提取了Love波相速度频散曲线,经过反演得到了研究区内的Love波相速度分布.根据Love波纯路径频散,采用线性反演方法对0.25°×0.25°的网格点进行了一维S波速度结构反演,利用线性插值获取了南北地震带地区的三维S波速度结构.结果显示了松潘—甘孜地体和川滇菱形块体地区的下地壳具有明显的S波低速层分布,该异常分布特征支持解释青藏高原隆升及其地壳物质运移的下地壳流模型.在100至120km深度上,川滇菱形块体西北部呈现较强的S波高速异常,这可能是印度岩石圈板块沿喜马拉雅东构造结下插至该区域所致,该区域下地壳的低速软弱物质与上地幔的高速强硬物质形成了鲜明对比,暗示了地壳和上地幔可能具有不同的构造运动和变形方式,这为该区域的壳幔动力学解耦提供了条件. 相似文献
5.
为了研究利用小当量震源进行远距离探测的可能性,通过现场试验进行了研究.野外实验采用1次大当量激发和16次小当量激发,研究结果表明：①有可能利用数十公斤当量的炸药实现200km距离的探测;②在激发条件相同（或相近）时,不同当量的激发波形滤波后存在一定的相似性;③依据人工震源可重复性采用以下的激发组合方式和处理方法能够有效提高信噪比：针对大当量激发与小当量激发波形的相似性,利用大当量激发的波形作模板与小当量激发的波形作相关,可判断台站是否接受到小当量激发的信号并检测其震相到时信息.针对小当量激发波形的相似性,采用小当量多次激发的方式,通过N次根加权叠加方法,能有效提高记录的信噪比和震相识别精度. 相似文献
6.
在将相关检测方法应用于三分向台站记录数据时不能采用台阵数据检测时所使用的基于相关系数束慢度估计的虚假触发筛查方法来控制误检测.为此,本文根据重复事件的震中位置本身固定,各台站记录到的重复事件信号之间的到时差与相应参考事件的信号到时差基本相同的特性,根据两个以上三分向台站的相关检测触发到时差筛查相关检测虚假触发,从而解决了相关检测方法在应用于三分向台站数据时虚假触发过多的问题.利用新疆的三个三分向台站一个月的连续数据对该方法进行测试的结果表明,该方法能在接近零误检率的情况下对重复地下爆炸进行检测. 相似文献
7.
8.
逆时偏移方法利用双程波算子模拟波场的正向和反向传播,通常采用互相关成像条件获得偏移剖面,是一种高精度的成像方法.但是传统的互相关成像条件会在偏移结果中产生低频噪声;此外,如果偏移速度中存在剧烈速度变化还可能进一步产生偏移假象.为了提高逆时偏移的成像质量,可在成像过程中先对震源波场和检波点波场分别进行波场分离,然后选择合适的波场成分进行互相关成像.本文基于Hilbert变换,推导了可在偏移过程中进行上下行和左右行波场分离的高效波场分离公式以及相应的成像条件,结合Sigsbee 2B合成数据,给出了不同波场成分的互相关成像结果.数值算例结果表明,采用本文提出的高效波场分离算法以及合理的波场成分互相关成像条件可以获得高信噪比的成像结果. 相似文献
9.
10.
We present a new model updating technique for the automatic calculation of the small strain shear modulus of geomaterials, based on bender element experiments. The technique searches for the shear modulus that maximizes the correlation between the output signal obtained from the experiment and the output signal acquired from its computational simulation. Instead of conventional extremum finding algorithms, a fixed point technique is used to update the shear modulus at each iteration. This option increases substantially the attraction basin of the absolute maximum correlation and improves the convergence of the algorithm. 相似文献