排序方式： 共有48条查询结果，搜索用时 16 毫秒
1.
Quartz‐rich veins in metapelitic schists of the Sanandaj‐Sirjan belt, Hamadan region, Iran, commonly contain two Al2SiO5 polymorphs, and, more rarely, three coexisting Al2SiO5 polymorphs. In most andalusite and sillimanite schists, the types of polymorphs in veins correlate with Al2SiO5 polymorph(s) in the host rocks, although vein polymorphs are texturally and compositionally distinct from those in adjacent host rocks; e.g. vein andalusite is enriched in Fe2O3 relative to host rock andalusite. Low‐grade rocks contain andalusite + quartz veins, medium‐grade rocks contain andalusite + sillimanite + quartz ± plagioclase veins, and high‐grade rocks contain sillimanite + quartz + plagioclase veins/leucosomes. Although most andalusite and sillimanite‐bearing veins occur in host rocks that also contain Al2SiO5, kyanite‐quartz veins crosscut rocks that lack Al2SiO5 (e.g. staurolite schist, granite). A quartz vein containing andalusite + kyanite + sillimanite + staurolite + muscovite occurs in andalusite–sillimanite host rocks. Textural relationships in this vein indicate the crystallization sequence andalusite to kyanite to sillimanite. This crystallization sequence conflicts with the observation that kyanite‐quartz veins post‐date andalusite–sillimanite veins and at least one intrusive phase of a granite that produced a low‐pressure–high‐temperature contact aureole; these relationships imply a sequence of andalusite to sillimanite to kyanite. Varying crystallization sequences for rocks in a largely coherent metamorphic belt can be explained by P–T paths of different rocks passing near (slightly above, slightly below) the Al2SiO5 triple point, and by overprinting of multiple metamorphic events in a terrane that evolved from a continental arc to a collisional orogen. 相似文献
2.
自然界的大多数造岩矿的是由两种或多种组分混合而成的固溶体。因此，在矿物，岩石和矿床等地质体的平衡热力学研究中不可避免地要涉及固溶体矿物热力学地为的问题。河南省西峡县杨乃沟红柱石矿泥质片岩中仅出现红柱石而没有蓝晶石和夕线石，红柱石矿物包裹体测温结果为420－600℃。通过矿物共生平衡p-t曲线所计算出的片岩形成温度和压力条件也应位于上述岩石学和岩相学等特征所限定的范围内。以此为基础，通过构筑矿物共生p-t平衡曲线的方法，对片岩中若干固溶体矿物理想性／非理想性问题进行了研究。其中斜长石必须以非理想固溶体处理，而石榴子石，黑云母和白云母视作理想固溶体的计算结果同片岩的岩石学和岩相学等特征相一致。 相似文献
3.
粤东塌山含锡花岗斑岩原生铝质矿物特征和成因 总被引：1，自引：1，他引：1
粤东塌山含锡花岗斑岩以岩脉产出，侵位年龄１３８Ｍａ，含不等数量的原生铝质矿物，如红柱石、铁铝榴石、铁叶云母和白云母等。根据产出特征，红柱石被区分为两个世代，石榴子石分为三个结晶时期。结合全岩为过铝质（Ａ／ＮＫＣ＝１．２３４），高的Ｋ２Ｏ／Ｎａ２Ｏ（２．１５）、Ｒｂ／Ｓｒ（３．１０）、Ｋ／Ｒｂ（２１５）比和ＩＳｒ值（０．７１３１），低的εＮｄ（Ｔ）值（－７．４）和长石铅同位素组成相似于造山带铅演化模 相似文献
4.
本文对丹凤西峡地区不同蓝晶石族矿床石榴子石进行了较系统的矿物学研究。从石榴子石的化学成分，晶体结构，红外吸收光谱特征及氧同位素组成与矿床成因类型，主变质相的相关关系，总结出了石榴子石的标型特征。 相似文献
5.
The amphibolite facies Puolankajärvi Formation (PjF) occupies the western margin of the Early Proterozoic Kainuu Schist Belt (KSB) of northern Finland. The lower and middle parts of the PjF consist of turbiditic psammites and pelites and tempestitic semipelites. This report concentrates on the pelitic lithologies which include quartz–two-mica–plagioclase schists with variable amounts of garnet, staurolite, andalusite and biotite porphyroblasts as well as sillimanite and cordierite segregations. The KSB forms a major north–south-trending synclinorium between two Archaean blocks. It contains both autochthonous and allochthonous units and is cut by faults and shear zones. The PjF lies on the western side of the KSB and is probably allochthonous. The formation has undergone six major deformation phases (D1, D2, D3a, D3b, D4 and D5). During D3a-D5 the maximum principal stress (σ1) changed in a clockwise direction from south-west to north-east. Between D2 and D3 the intermediate principal stress (σ2) changed from horizontal to vertical and the interval between D2 and D3 marks a transition from thrust to strike-slip tectonics. Relict structures in the porphyroblasts indicate the following mineral growth–deformation evolution in the PjF. (1) Throughout the PjF there was a successive crystallization of garnet (syn-D1), poryphyroblastic biotite (inter-D3/4) and staurolite (inter-D3/4) during the pre-D4 stage. (2) A syn-D4-inter-D4/5 crystallization of kyanite, sillimanite (fibrolite), porphyroblastic tourmaline, magnetite, rutile, cordierite and muscovite–biotite–plagioclase pseudomorphs after staurolite was most localized at and near D4 shear zones. (3) A syn- to post-D5 generation of andalusite, ilmenohematite and sheet silicates after staurolite and after cordierite occurred near D5 faults. The evolution outlined here permits the relative dating of the PjF parageneses, which is used in the second part of the study (Tuisku & Laajoki, 1990), and, together with the knowledge of the pressure–temperature conditions during various growth events, makes it possible to compile pressure–temperature–deformation paths for the PjF. 相似文献
6.
Rocks of the Snake Creek Anticline are mainly pelitic schists, psammitic schists and quartzites that were metamorphosed during multiple high‐T/low‐P events extending from D1 to D5, with the metamorphic peak occurring late to post‐D3. Albitites are widespread, but are concentrated in five areas. They are typically fine‐ to medium‐grained, and consist of albite, with or without combinations of quartz, biotite, staurolite, cordierite, garnet, andalusite, sillimanite, kyanite, gedrite and tourmaline. From the presence or absence of albite inclusions in porphyroblasts, the albitites are interpreted as forming early in the D3 event as a result of infiltration of external fluids. Psammitic schists and quartzites were preferentially altered, but pelitic schists were also albitized in localities where the alteration was more extreme, with the replacement of muscovite total and the replacement of quartz and biotite variable. Structural controls on albitization include fracturing and syn‐D3 shear zones in fold hinges. Biotite schists with abundant porphyroblasts (combinations of staurolite, garnet, andalusite and cordierite) occur adjacent to albitites, and it is argued that they formed by the addition of Fe and Mg sourced from the albitites. In several albitite‐rich areas, cordierite grew early in D3 and was partly or entirely replaced during or after D3 by combinations of biotite, andalusite, tourmaline, staurolite and sillimanite. A postulated P–T–d path involved an increase in pressure (with or without a decrease in temperature) subsequent to early D3 albitization, followed by an increase in temperature up to the metamorphic peak (late D3 to early D4. The metamorphism was contemporary in part with the emplacement of the Williams Batholith (c. 1550–1500 Ma), which probably supplied the Na‐rich fluids. 相似文献
7.
F. J. MARTINEZ J. RECHE M. L. ARBOLEYA M. JULIVERT 《Journal of Metamorphic Geology》2004,22(9):777-792
Andalusite porphyroblasts are totally pseudomorphosed by margarite–paragonite aggregates in aluminous pelites containing the peak mineral assemblage andalusite, chlorite, chloritoid, margarite, paragonite, quartz ± garnet, in a NW Iberia contact area. Equilibria at low P–T are investigated using new KFMASH and (mainly) MnCNKFMASH grids constructed with Thermocalc 3.21. P–T and T–X pseudosections with phase modal volume isopleths are constructed for compositions relatively richer and poorer in andalusite to model the assemblages in an andalusite‐bearing rock that contains a thin andalusite‐rich band (ARB) during retrogression. Their compositions, prior to retrogression, are used in the modelling, and have been retrieved by restoring the pseudomorph‐forming elements into the current‐depleted matrix, except for Al2O3 which is assumed to be immobile. Compositional differences between the thin band and the rest of the rock have not resulted in differences in andalusite porphyroblast retrogression. The absence of chloritoid resorbtion implies either a pressure increase at constant reacting‐system composition, or that its composition changed during retrogression at constant pressure, by becoming enriched in the progressively replaced andalusite porphyroblasts. T–X pseudosections at 1 kbar model this latter process using as end‐members in X, first, the restored original rock and ARB compositions, and, then the same process, taking into account the change in composition of both as retrogression proceeded. The MnNCKFMASH pseudosections of rocks with different Al contents facilitate making further deductions on the rock‐composition control of the resulting assemblages upon retrogression. Andalusite eventually disappears in relatively Al‐poor rocks, resulting, as in this study, in a rock formed by chloritoid–chlorite as the only FM minerals, plus margarite–paragonite pseudomorphs of andalusite. In rocks richer in Al, chlorite would progressively disappear and a kyanite/andalusite–chloritoid assemblage would eventually be stable at retrograde conditions. The Al‐silicate, stable during retrogression in Al‐rich rocks, indicates pressure conditions and hence the tectonic context under which retrogression took place. 相似文献
8.
红柱石矿床产于花岗闪长岩与上元古界震旦系地层之外接触带,该矿床属高铝泥质沉积岩在区域变质产物的基础上,再经后期接触热变质成矿,成矿后的动力变质作用及热液改造迹象比较明显。 相似文献
9.
红柱石微粉对高铝矾土熟料制品的补强作用 总被引：2，自引：0，他引：2
高铝矾土熟料制品是除粘土制品之外使用范围最广、用量最大的耐火材料,在各种工业窑炉中都有广泛应用。生产铝矾土熟料制品一般采用不同粒级的铝矾土熟料与塑性粘土为原料,用倒焰窑烧成时,烧成温度为１４３０～１４５０℃,保温４０ｈ;用隧道窑烧成时,烧成温度为１５５０～１５６０℃。其工艺关键是控制二次莫来石化产生的体积效应。当制品的Ａｌ２Ｏ３含量在７０％以下时,铝矾土熟料制品的高温性能取决于莫来石晶相与液相间的数量比例。Ａｌ２Ｏ３含量越高,制品中莫来石含量越高,玻璃相相应减少,制品的高温性能越好。在生产中提高… 相似文献
10.