Canonical theory of perturbations using eccentric anomaly as independent variable     

Janis Britals 《Celestial Mechanics and Dynamical Astronomy》1992,54(4):305-316

It is shown in this paper how to build a canonical transformation of variables, so that the eccentric anomaly becomes the new independent variable. In the case of eccentric elliptical orbits it changes the equations of motion so, that they can be integrated analytically to any order of approximation comparatively easy.  相似文献   

Numerical calculations in the orbital determination of an artificial satellite for a long arc     

Lin Liu  Xinhao Liao 《Celestial Mechanics and Dynamical Astronomy》1994,59(3):221-235

Numerical methods are usually used for the computation of ephemerides with perturbations for the precise orbital determination of an artificial satellite. But their numerical stability will be encountered in a long arc. In this case the use the improved Encke special perturbation methods has been suggested. The results of this paper show that Encke's method does indeed have a certain effectiveness, but cannot yet completely resolve the numerical stability, and the more efficient method is to use the energy integral or its variational relation to control the growth of the along-track error in general numerical calculations so that the aim of stabilization can be achieved.  相似文献   

FITS、BMP和SCR图象格式及相互转换   总被引：1，自引：0，他引：1  

季凯帆  曹文达  宋谦 《天文研究与技术》1996,(2)

本文详细介绍图象的ＦＩＴＳ格式、ＢＭＰ格式和ＳＣＲ格式。ＦＩＴＳ格式已经是天文界的通用格式，几乎所有的天文软件包都支持这一格式，而ＢＭＰ格式在ＰＣ计算机上有广泛的运用，有大量ＰＣ软件支持ＢＭＰ图象的显示，处理和打印。云南天文台的ＳＣＲ格式是ＰＣ机采集ＣＣＤ图象所使用的格式。实现这三种格式的相互转换，就可以自由的将ＣＣＤ图象在ＰＣ机和工作站上进行各种处理。转换的包括图象头和图象数据的转换，其关键在于交换数据的高低字节。  相似文献   

Experimental solidification of anhydrous latitic and trachytic melts at different cooling rates: The role of nucleation kinetics   总被引：1，自引：0，他引：1  

Gianluca Iezzi  Silvio Mollo  Guido Ventura  Andrea Cavallo  Claudia Romano 《Chemical Geology》2008,253(3-4):91-101

Two sets of cooling experiments were run at atmospheric conditions for two anhydrous starting latitic and trachytic melts: 1) five cooling rates (25, 12.5, 3, 0.5, and 0.125 °C/min) between 1300° and 800 °C, and 2) a 0.5 °C/min cooling rate from 1300 °C with quench temperatures at 1200°, 1100°, 1000° and 900 °C. Trachytic run-products are invariably glassy. Nucleation is also suppressed in the latitic run-products at the three highest cooling rates. Conversely, in the 0.5 and 0.125 °C/min runs, latites have a crystal content of  90 vol.%. The phases are: plagioclase, clinopyroxene, glass and iron-bearing oxide (in order of abundance). The variable quench temperatures, investigated by coupling experiments with Pt wire and Pt capsule sample containers in set 2, again did not produce crystallization of trachyte, whereas latitic samples are characterized by  10 vol.% of oxides, pyroxenes and plagioclase (in order of appearance), at temperature < 1000 °C. Effects of (preferential) heterogeneous nucleation on sample holders, of superheating degree, and chemical species loss during cooling are absent for both melt compositions. The difference of solidification paths between these two silicate melts can be ascribed only to their small chemical differences. In comparison with calculated equilibrium conditions all the experimental latitic and trachytic run-products revealed strong kinetic effects, interpretable in the light of the nucleation theory. The glass-forming ability (GFA) of trachyte is higher, whereas their critical cooling rate (Rc) is lower (< 0.125 °C/min), in comparison to latitic melts (Rc > 0.5 °C/min). The experimental results carried out in this study can be applied to lava flows and domes; trachytic lavas are able to flow for longer period with respect to latitic ones in a metastable condition. Glass-rich terrestrial lavas, i.e. obsidians, can be the result of sluggish nucleation kinetics due to the relative high polymerisation of evolved silicate melts.  相似文献   

江苏潮滩沉积物激光粒度仪与移液管-筛析分析结果的对比     

仝长亮  高抒 《沉积学报》2008,26(1):46-53

激光粒度仪的广泛应用带来了与历史数据的对比问题,因此需要建立激光粒度仪与早期分析结果之间的关系。根据江苏海岸潮滩沉积物样品的激光粒度仪和移液管-筛析法分析,对粒度参数、粒度组分等进行了对比,对两种方法的差异进行了分析。结果表明,对于江苏潮滩沉积物粒度参数中平均粒径的激光粒度仪与移液管-筛析分析结果之间有良好的线性关系;筛分法测得的粗颗粒物质较激光法偏少,而移液管法法测得的细颗粒物质较激光法偏多;将样品分类之后再进行两种方法所获粒度参数的回归分析,相关性得以提高,说明不同粒度组成的沉积物对分析结果的对比有不同的影响。两种方法之间的换算关系不仅与研究区域有关,而且与沉积物本身的粒度组成有关。  相似文献   

1.0GPa和常温至1100 ℃条件下角闪石斜长片麻岩的V_p变化:实验测量与理论计算   总被引：3，自引：0，他引：3  

蒋玺  周文戈  刘丛强  谢鸿森  刘永刚 《岩石学报》2008,24(10)

在1．0GPa、常温至1100℃条件下测量了角闪石斜长片麻岩的纵波速度（Vp）,并统计了不同温度实验产物中各种矿物的体积百分含量。结果显示,1．0GPa下,角闪石斜长片麻岩的Vp首先随温度升高（室温至700℃）缓慢降低约6％,然后（700—850℃）快速降低约6％,再（850～950℃）转而急剧升高15％～25％,最后（T〉950℃）又快速下降。实验产物分析表明在高温高压下α-石英-β石英相变和岩石部分熔融是岩石Vp异常变化的主要因素。由取样产物的矿物含量和弹性参数,计算了各温度条件下岩石的Vp得出与实验测量相同的波速-温度变化趋势,即Vp随温度升高先缓慢降低,接着快速降低后又急剧升高,最后又快速减小。实验测量和理论计算对比研究表明,通过高温高压下岩石中的物相变化观测结果进行岩石波速的计算,是检验岩石弹性波速测量结果和研究地球内部地震波结构的一种有效方法。  相似文献   

钢筋混凝土梁结构断裂损伤诊断方法     

周尚志  王丽华刘瑛 《海洋工程》2005,23(4):47-51

提出一种基于BP神经网络的结构破损诊断方法,该方法以结构破损前后柔度的变化作为破损诊断网络输入,为了解决由于系统响应样本数据空间分布不均匀对网络收敛速度及网络诊断影响问题,对网络训练样本采用广义空间格点进行了交换,模拟算例及应用实例均表明,本文方法能准确诊断结构破损位置与破坏程度,是一种有效的结构破损诊断方法.  相似文献   

An improved multiple-frequency method for measuring in situ target strengths     

Conti  Stephane G.; Demer  David A.; Soule  Michael A.; Conti  Jean H.E. 《ICES Journal of Marine Science》2005,62(8):1636-1646

  相似文献   

Dynamic analysis of a vertical plate exposed to breaking wave impact     

M. Salih Kirkgoz  A. Kamil Tanrikulu  Cengiz Dündar 《Ocean Engineering》2004,31(13):2308-1635

From the experimental studies in recent years, it has become known that when a wave breaks directly on a vertical faced coastal structure, high magnitude impact pressures are produced. The theoretical and experimental studies show that the dynamic response of such structures under wave impact loading is closely dependent on the magnitude and duration of the load history. The dynamic analysis and design of a coastal structure can be succeeded provided the design load history for the wave impact is available. Since these types of data are very scarce, it is much more convenient to follow a method which is based on static analysis for the dynamic design procedure. Therefore, to facilitate the dynamic design of a vertical plate that is exposed to breaking wave impact, a multiplication factor called “dynamic magnification factor” is herein presented which is defined as the ratio of the maximum value of the dynamic response to that found by static analysis. The computational results of the present study show that the dynamic magnification factor is a useful ratio to transfer the results of static analysis to the dynamic design of a coastal plate for the maximum impact pressure conditions of p_max/γH₀≤18.  相似文献   

The wave transformation and breaking phenomena in shallow water     

Li Yucheng 《海洋学报(英文版)》1996,15(2):261-272

Ｔｈｅｗａｖｅｔｒａｎｓｆｏｒｍａｔｉｏｎａｎｄｂｒｅａｋｉｎｇｐｈｅｎｏｍｅｎａｉｎｓｈａｌｌｏｗｗａｔｅｒ￥ＬｉＹｕｃｈｅｎｇ（１．ＤａｌｉａｎＵｎｉｖｅｒｓｉｔｙｏｆＴｅｃｈｎｏｌｏｇｙ，Ｄａｌｉａｎ１１６０２３，Ｃｈｉｎａ）Ａｂｓｔｒａｃｔ：...  相似文献