排序方式： 共有19条查询结果，搜索用时 171 毫秒
1.
Rockfill is an important construction material for infrastructure engineering, such as dams, railways and airport foundations, which display a long-term post-construction settlement. However, the main mechanisms for rockfill creep and weathering influence still remain poorly understood. Particle mechanics method is used to understand the rockfill creep process under dry and wet conditions. Different bond-aging models and wetting models that represent different degradation and weakening mechanisms are compared, in order to clarify the principle and secondary mechanisms for rockfill creep and weathering influence. The results show that rockfill aggregate breakage in terms of angularity abrasion is the main source for rockfill creep under dry state. Wetting can induce additional strain mainly due to the reduction of contact friction coefficient, i.e. lubrication, and the bond strength reduction just plays a secondary role in producing additional strain. The earlier the wetting occurs during rockfill creep, the more rapidly the rockfill becomes stable. The wetting–drying cycles can induce strain evolution in a ‘stepped’ way, which is in agreement with experimental observation. The practical implications from the modeling and the outstanding issues in this study are also discussed. 相似文献
2.
附加质量法是一种新兴的堆石体密度检测方法,它具有方便、无损等优点,近年来有较为广泛的应用,但该方法的应用效果会受到震源、雨水、双峰频谱等因素的影响.本文则考虑堆石体系统振动的阻尼因素,以及附加质量块与堆石体之间的非刚性连接,分别基于质弹阻模型以及双自由度-质弹阻模型对这些因素的影响进行了理论分析.结果表明,质弹阻模型可以解释主频随震源频率和雨水而变化的现象;而双自由度-质弹阻模型则可以解释主频随质量块偏移距和触地面积而变化的现象.在此基础上,本文对附加质量法的测试过程提出了几点改进建议. 相似文献
3.
岩溶水作用下填石路基稳定性模型试验研究 总被引：2，自引：2，他引：0
以广西水南高速为工程依托点,通过大型岩溶塌陷物理模型试验室,针对岩溶区填石路基中不同岩溶形态的处置方式,模拟研究岩溶水对填石路基的稳定性问题。试验中,重点研究了四种结构: 填石级配型、(片石+ 级配碎石+ 土工布+填石)型、反滤层型、(土+ 填石)型,它们分别对应岩溶水对填石路基侵蚀问题及填石路基的稳定性问题,漏斗、落水洞的处理及土工布防止细粒土流失引起路基变形问题,溶洞填充物的流失问题,岩溶水对粘土路基潜蚀问题及石牙地基的处理。试验结果表明,地下水位变化的瞬时速度对填石路基的稳定性具有重要意义,不同的处置方法在抵抗地下水冲刷方面有显著区别。 相似文献
4.
A review of considerations on seismic safety of embankments and earth and rock-fill dams 总被引：2，自引：0，他引：2
M. Yener Ozkan 《Soil Dynamics and Earthquake Engineering》1998,17(7-8):439-458
An attempt has been made to summarise the methods of approach used in assessing the dynamic behaviour and safety of earth and rock-fill dams under seismic shaking until about the present time, from the soil engineer's point of view. Shortcomings of the pseudo-static method, procedures to estimate the permanent deformations, liquefaction effects, and experience gained from the previous events have been reviewed. Observing that the most important cause of instability is the occurence liquefaction during ground motions, cyclic approach and steady-state approach in assessing the liquefaction potential have been addressed and recent practical approaches of analysis and design have been referred. It has been found noteworthy to recall that incidence of failure or serious damage to well-engineered dams has not been experienced, even under strong ground shaking. 相似文献
5.
The self-potential method can be applied to evaluate the degree of water seepage into earth or rockfill dams. Spatial distribution of measured self-potential data can indicate possible anomalous water flow. Phenomena, such as piping, can be modelled as cylindrical bodies. Internal erosion can develop structures, which can be represented by a sphere or point source. Differential settlement in the dam structure occasionally creates horizontal fractures, which require equivalent geometrical body formula. An equation, which allows the calculation of a self-potential profile over a horizontal contact, was developed. This equation can also be applied to the inspection of water flow into horizontal drainage filters. When inverse interpretation returns bodies of relatively small amplitudes, then their probability can be tested statistically. A test, based on cross-correlation between a modelled curve and field data, can be used to evaluate their existence at a given probability level. An acceptance criterion is computed, using the concept of likelihood coefficient. The equation was applied to two case histories. The first is an example of water flow evaluation into a horizontal drainage filter. Several anomalous bodies were interpreted from residual self-potential data, i.e. from the difference between the theoretical response of the filter and the measured self-potential values, then, most of the interpreted bodies were statistically tested. The second case deals with detection and evaluation of a horizontal fissure. The interpreted parameters of the detected body corresponded well to a horizontal fracture found when the water level in the reservoir was lowered. 相似文献
6.
Yang Xiao Minqiang Meng Ali Daouadji Qingsheng Chen ZhijunWu Xiang Jiang 《地学前缘(英文版)》2020,(2):375-388
Strength and deformation behaviors of rockfill materials,key factors for determining the stability of dams,pertain strongly to the grain crushing characteristics.In this study,single-particle crushing tests were carried out on rockfill materials with nominal particle diameters of 2.5 mm,5 mm and 10 mm to investigate the particle size effect on the single-particle strength and the relationship between the characteristic stress and probability of non-failure.Test data were found to be described by the Weibull distribution with the Weibull modulus of 3.24.Assemblies with uniform nominal grains were then subjected to one-dimensional compression tests at eight levels of vertical stress with a maximum of 100 MPa.The yield stress in one-dimensional compression tests increased with decreasing the particle size,which could be estimated from the single-particle crushing tests.The void ratio-vertical stress curve could be predicted by an exponential function.The particle size distribution curve increased obviously with applied stresses less than 16 MPa and gradually reached the ultimate fractal grading.The relative breakage index became constant with stress up to 64 MPa and was obtained from the ultimate grading at the fractal dimension(a?2:7).A hyperbolical function was also found useful for describing the relationship between the relative breakage index and input work during one-dimensional compression tests. 相似文献
7.
Dense Tacheng rockfill material (TRM) exhibits strain softening and dilation during drained triaxial tests, and therefore, an adapted Rowe’s stress–dilatancy equation was proposed for TRM. This equation incorporates an internal state index related to the density and pressure, as well as the coefficient of particle breakage and rotation. The adapted Rowe’s stress–dilatancy equation indicates that the relationship between stress and dilatancy is not constant, but varies with density and pressure. This result is in agreement with TRM test data. A state-dependent model was established for TRM using generalized plasticity theory combined with the adapted Rowe’s stress–dilatancy equation. The model includes twelve constants calibrated using TRM test data from Group A, and this model was used to predict the strain softening and dilatancy behaviors of dense TRM. Furthermore, the model predictions were validated using test data from Group B. In summary, the model accurately represented the stress–strain and dilatancy behaviors of TRM over a wide range of densities and pressures. 相似文献
8.
P. Ramírez Oyanguren C. Gonzlez Nicieza M.I. lvarez Fernndez C. Gonzlez Palacio 《Engineering Geology》2008,100(3-4):120-130
This paper analyzes the stability of the Llerin rockfill dam using Barton–Kjaernsli's shear criterion. To fit the parameters of this criterion, a direct shear test was designed that allows in situ calculation, using large-size samples of the shear stress at which failure is produced for different normal loads. These experimental values are then used to obtain more reliable values for the friction angle and the equivalent roughness of the rockfill material.The rockfill of Llerin dam is formed by a suitably ground gonfolite limestone rockfill that serves as a contention dam for a lagoon of mine tailings. The experimental results obtained in in situ tests were compared with those predicted by the shear criterion, subsequently determining the safety coefficient of the rockfill dam using the SLOPE computer program. We conclude that the values estimated via in situ testing permit the behaviour of the containment dam to be predicted more accurately. 相似文献
9.
10.
In the attempt to codify a procedure exportable to other similar cases, a thorough investigation of the seismic performance of a bituminous concrete faced rockfill dam built in Italy in the early eighties is herein presented. The dam presents a 90 m tall embankment built in a narrow canyon and is situated in a highly seismic region. The implemented methodology encompasses the indications provided by the most recent literature to point out the problems potentially caused by earthquakes and to account for the paramount factors affecting the response of the dam. Particular attention has been paid to the concept of performance, defining its goals in accordance with the most recent standards and deriving the correspondent limit conditions from observations reported in the literature. In order to optimize the computational effort, dynamic analyses with two and three dimensional finite difference codes have been combined to study the coupled response of the embankment, rocky foundation and bituminous facing. After validating the numerical models with centrifuge tests performed on small scale models of the embankment, the performance of the dam has been investigated with reference to a number of possible scenarios focusing on the amplification spectra, the deformation of the embankment and the integrity of the bituminous lining. 相似文献