排序方式： 共有17条查询结果，搜索用时 718 毫秒
1.
Electrical, seismic, and electromagnetic methods can be used for noninvasive determination of subsurface physical and chemical properties. In particular, we consider the evaluation of water salinity and the detection of surface contaminants. Most of the relevant properties are represented by electric conductivity, P-wave velocity, and dielectric permittivity. Hence, it is important to obtain relationships between these measurable physical quantities and soil composition, saturation, and frequency. Conductivity in the geoelectric frequency range is obtained with Pride's model for a porous rock. (The model considers salinity and permeability.) White's model of patchy saturation is used to calculate the P-wave velocity and attenuation. Four cases are considered: light nonaqueous phase liquid (LNAPL) pockets in water, dense nonaqueous phase liquid (DNAPL) pockets in water, LNAPL pockets in air, and DNAPL pockets in air. The size of the pockets (or pools), with respect to the signal wavelength, is modeled by the theory. The electromagnetic properties in the GPR frequency range are obtained by using the Hanai–Bruggeman equation for two solids (sand and clay grains) and two fluids (LNAPL or DNAPL in water or air). The Hanai–Bruggeman exponent (1/3 for spherical particles) is used as a fitting parameter and evaluated for a sand/clay mixture saturated with water.Pride's model predicts increasing conductivity for increasing salinity and decreasing permeability. The best-fit exponent of the Hanai–Bruggeman equation for a sand/clay mixture saturated with water is 0.61, indicating that the shape of the grains has a significant influence on the electromagnetic properties. At radar frequencies, it is possible to distinguish between a water-saturated medium and a NAPL-saturated medium, but LNAPL- and DNAPL-saturated media have very similar electromagnetic properties. The type of contaminant can be better distinguished from the acoustic properties. P-wave velocity increases with frequency, and has dissimilar behaviour for wet and dry soils. 相似文献
2.
In this paper we study the infiltration of DNAPL in a porous medium containing a single low-permeable lens. Our aim is to
determine whether or not DNAPL infiltrates into the lens. A key role is played by the capillary pressure: DNAPL cannot infiltrate
into the lens unless the capillary pressure exceeds the entry pressure of the lens. In the model this is reflected by an interface
condition, the extended capillary pressure condition. To derive analytical approximations we first consider a steady-state
DNAPL plume in a homogeneous medium. This results in an estimate of the DNAPL plume width as a function of depth, and an asymptotic
solution for small saturations. Assuming that the extent of the lens is much larger than the width of the unperturbed DNAPL
plume in the homogeneous medium, we derive an explicit criterion for DNAPL infiltration into the lens in terms of a critical
inflow rate. A numerical algorithm is presented in which the extended capillary pressure condition is incorporated. The numerical
and analytical results show good qualitative agreement.
This revised version was published online in August 2006 with corrections to the Cover Date. 相似文献
3.
L. D.?LemkeEmail author L. M.?Abriola 《Stochastic Environmental Research and Risk Assessment (SERRA)》2003,17(6):408-418
The influence of aquifer property correlation on multiphase fluid migration, entrapment and recovery was explored by incorporating correlated and uncorrelated porosity, permeability, and capillary pressure-saturation (Pc-Sat) parameter fields in a cross-sectional numerical multiphase flow model. Comparison of two-dimensional entrapped organic saturation distributions for a simulated tetrachloroethylene (PCE) spill in ensembles of aquifer realizations suggests that the degree of spatial correlation in Pc-Sat parameters exerts a controlling influence on dense nonaqueous phase liquid (DNAPL) spreading and redistribution in saturated aquifers. The predicted evolution of DNAPL source zones and resultant remediation efficiency under surfactant enhanced aquifer remediation (SEAR) also appear to be strongly influenced by the spatial correlation of aquifer parameters and multiphase flow constitutive relationships. Results for a limited number of realizations selected from each ensemble showed that removal of 60% to 99% of entrapped PCE could reduce dissolved contaminant concentration and mass flux by approximately two orders of magnitude under natural gradient conditions. Aqueous phase contaminant mass flux did not vary uniformly as a function of % DNAPL removed, however, and notable differences in behavior were observed for models incorporating correlated versus uncorrelated Pc-Sat and permeability fields. Although these results must be confirmed through analysis of additional realizations, it is likely that similar or larger differences between correlated and uncorrelated system behavior will be observed in aquifers with greater spatially variability than that of the nonuniform, homogeneous sand aquifer studied here.
Funding for this research was provided by the United States Environmental Protection Agency, Great Lakes and Mid-Atlantic Center for Hazardous Substance Research under Grant No. R-825540, the Michigan Department of Environmental Quality under Contract No. Y80011, and the Strategic Environmental Research and Development Program under Project No. CU-1293. The content of this publication does not necessarily represent the views of these agencies and has not been subject to agency review. 相似文献
4.
The equations for a compositional model for simulation of a two-phase, three-component system with inter-phase mass transfer are developed. Emphasis is placed on development of inter-phase mass transfer equations for incorporation of rate-limited inter-phase mass transfer. Due to the nature of the three-component systems considered, a single-film model may be inadequate and a two-film model must be utilized. A two-film model accounts for the simultaneous transfer of components in both directions across phase interfaces. The effect of interaction between components on diffusion is considered using a general form of Fick's Law. A Hand Plot representation of ternary phase behavior is chosen since it allows for straightforward calculation of miscibility of bulk phases under conditions of local non-equilibrium. The developed set of equations form the basis for a numerical model to simulate the enhanced removal of non-aqueous phase liquids (NAPLs) from porous media using single-component alcohol floods. 相似文献
5.
This paper compares the performance of analytical and numerical approaches for modeling DNAPL dissolution with biodecay. A solution derived from a 1-D advective transport formulation (“Parker” model) is shown to agree very closely with high resolution numerical solutions. A simple lumped source mass balance solution in which with decay is assumed proportional to DNAPL mass (“Falta1” model) over- or underpredicts aqueous phase biodecay depending on the magnitude of the exponential factor governing the relationship between dissolution rate and DNAPL mass. A modification of the Falta model that assumes decay proportional to the source exit concentration is capable of accurately simulating source behavior with strong aqueous phase biodecay if model parameters are appropriately selected or calibrated (“Falta2” model). However, parameters in the lumped models exhibit complex interdependencies that cannot be quantified without consideration of transport processes within the source zone. Combining the Falta2 solution with relationships derived from the Parker model was found to resolve these limitations and track the numerical model results. A method is presented to generalize the analytical solutions to enable simulation of partial mass removal with changes in source parameters over time due to various remedial actions. The algorithm is verified by comparison with numerical simulation results. An example application is presented that demonstrates the interactions of partial mass removal, enhanced biodecay, enhanced mass transfer and source zone flow reduction applied at various time periods on contaminant flux reduction. Increasing errors that arise in numerical solutions with coarse discretization and high decay rates are shown to be controlled by using an adjusted decay coefficient derived from the Parker analytical solution. 相似文献
6.
The influence of model dimensionality on predictions of mass recovery from dense non-aqueous phase liquid (DNAPL) source zones in nonuniform permeability fields was investigated using a modified version of the modular three-dimensional transport simulator (MT3DMS). Thirty-two initial two- (2D) and three-dimensional (3D) tetrachloroethene–DNAPL source zone architectures, taken from a recent modeling study, were used as initial conditions for this analysis. Commonly employed source zone metrics were analyzed to determine differences between 2D and 3D predictions: (i) down-gradient flux-averaged contaminant concentration, (ii) reductions in contaminant mass flux through a down-gradient boundary, (iii) source zone ganglia-to-pool (GTP) ratio, and (iv) time required to achieve a remediation objective. 3D flux-averaged contaminant concentrations were approximately 3.5 times lower than concentrations simulated in 2D. This difference was attributed to dilution of the contaminant concentrations down gradient of the source zone. Contaminant flux reduction predictions for a given mass recovery were generally 5% higher in 3D simulations than in 2D simulations. The GTP ratio declined over time as mass was recovered in both 2D and 3D simulations. Although the source longevity (i.e., time required to achieve 99.99% mass recovery) differed between individual 2D and 3D realizations, the mean source longevity for the 2D and 3D simulation ensembles was within 2%. 2D simulations tended to over-predict the time required to achieve lower mass recovery levels (e.g. 50% mass recovery) due to a smaller contaminated area exposed to uncontaminated water. These findings suggest that ensemble averages of 2D numerical simulations of DNAPL migration, entrapment, dissolution, and mass recovery in statistically homogenous, nonuniform media may provide reasonable approximations to average behavior obtained using simulations conducted in fully three-dimensional domains. 相似文献
7.
多孔介质中重非水相液体(Dense Non Aqueous Phase Liquid,DNAPL)与水相的界面面积是影响DNAPL在地下水中溶解速率的关键参数。本文通过二维均质砂箱实验,运用界面分配示踪法和体积分配示踪法分别测定DNAPL与水相的界面面积(单位介质体积内的面积,Anw)和DNAPL饱和度(Sn),并研究两者之间的相关关系。使用C18H29NaO3S(SDBS)作为界面分配示踪剂,Alcohol(2,4 Dimethyl 3 Pentanol)作为体积分配示踪剂,CaBr2作为保守示踪剂。利用Fe2+催化的Na2S2O8对DNAPL进行原位氧化修复,改变Anw和Sn。结果表明,通过定量(用孔隙体积数PV值衡量)加入Na2S2O8,Anw由206 cm2逐渐降为37 cm2,下降速率约为14 cm2/PV;Sn由1.34%逐渐降为0.33%,下降速率约为0.1%/PV;Anw和Sn之间具有良好的线性关系(Anw=146×Sn,R2=0.987)。此关系可用于估算多孔介质中DNAPL与水相之间的界面面积。对实验影响因素的分析表明,孔隙度的增大(变化率为20.7%)使示踪剂穿透曲线出现肩现象和拖尾现象,导致保守示踪剂的保留时间增加5.6%,界面面积减小6.8%。 相似文献
8.
《Geomechanics and Geoengineering》2013,8(3):155-165
The use of the piezocone to provide detailed stratigraphic information as well as the piezometric and hydraulic characteristics of the soil is discussed. A resistivity module of external electrode rings attached to the piezocone developed at UBC to log and assess groundwater quality, soil porosity and saturation is also discussed together with basic theory and factors that affect in-situ electrical resistivity. Finally, the combination of the economical and rapid UBC-modified BAT groundwater penetration tool to provide ‘specific-depth’ groundwater samples for chemical and biological analysis and correlation with resistivity will also be explained. Field data from several case histories are presented to demonstrate the use of the resistivity piezocone in combination with groundwater sampling to provide screening data to locate permanent monitoring well systems or to develop remediation scenarios. The examples deal with acid mine drainage at a mine site, creosote contamination at a pressure treatment plant, seawater intrusion alongside a river outlet and seepage through a tailings dam. 相似文献
9.
非均质介质的空间维度变化对重非水相流体（DNAPL） 的运移具有重要的影响。在充分考虑地质体的空间连续
性、不对称性以及各向异性等特征的基础上,采用基于马尔可夫链的转移概率（transition probability） 模型来构建非均质
随机场。该文通过TMVOC-MP软件来模拟DNAPL在非均质介质中的运移规律,探讨非均质随机场的水平空间连续性、
空间维度变化以及侧向运移过程对DNAPL运移的影响。结果表明,介质的水平空间连续性越好,DNAPL在水平方向的
迁移范围越大,在垂向的迁移范围越小;相比于三维模型,二维模型中DNAPL在水平方向的展布更大、在透镜体上的蓄
积量更多,在实际应用中以二维模型代替三维模型会加大模拟结果与实际污染情况之间的误差;侧向运移过程削弱了单
个平面的非均质性对DNAPL运移的控制,当存在侧向运移时,DNAPL绕过透镜体所运移的距离以及在透镜体上的蓄积
量会相应减小。 相似文献
10.
重非水相液体(dense nonaqueous phase liquid,DNAPL)污染土壤和地下水的问题已引起广泛关注,研究其在不同粒径多孔介质及其界面的运移特征形态是确定污染区域、修复治理土壤和地下水环境的前提。文章通过室内试验研究多孔介质界面对DNAPL运移与分布特性的影响。首先在二维砂槽上进行DNAPL污染物的入渗试验,试验过程中用数码相机拍照,将DNAPL扩散过程以图像的形式记录下来;然后用AutoCAD对图片进行处理,绘制出DNAPL迁移过程的锋面变化图。结果表明:DNAPL入渗过程中,迁移主要受到重力作用与毛细作用的控制,毛细作用力随着介质粒径的增大逐层减小,重力作用逐渐起主导作用使污染物入渗速度逐层增大;介质结构影响DNAPL的迁移形态,介质粒径逐层增大,DNAPL污染物的渗流面与指进扩散宽度逐层减小,扩散方式由面状变为指状;在不同粒径介质界面介质结构发生突变时,DNAPL迁移锋面线曲率也相应变大,此时DNAPL的迁移呈现“凸”型特征,另外,不同的界面横向扩散的滞留宽度不同,随着介质粒径的增大,界面的横向扩散宽度相对变短。 相似文献