排序方式： 共有54条查询结果，搜索用时 15 毫秒
1.
Li同位素是一种新兴的非传统稳定同位素示踪工具,在地质学、地球化学研究中具有广阔的应用前景。目前,Li同位素溶液分析技术主要采用热电离质谱仪（TIMS）和多接收电感耦合等离子质谱仪（MC-ICP-MS）,与TIMS相比,MC-ICP-MS具有分析精度高、样品量少、测试速度快等诸多优点。本研究团队近年来建立了MC-ICP-MS高精度Li同位素分析方法,在天然样品、标准物质以及石英包裹体的Li同位素测定中都取得了良好结果。以此为依托,研究团队建立了适用于西藏本地岩石成因研究的Li同位素地质端元,并将Li同位素应用于青藏高原岩石圈结构及其隆升历史、川西碳酸岩型稀土矿床富集机制、四川呷村VMS型矿床成矿流体来源和四川甲基卡硬岩型Li矿床富集机理等方面。本文比较详细地综述了这些研究进展,旨在加深对Li同位素溶液分析技术的理解,展示其在地球化学研究中的良好应用前景。 相似文献
2.
Mo同位素的研究在地学领域应用广泛,它可以示踪Mo的全球循环、古海洋氧化还原条件、成矿过程、天体演化过程等。应用多接收电感耦合等离子体质谱法(MC-ICP-MS)分析Mo同位素比值前需对样品进行分离纯化,以富集Mo和去除Zr、Ru、Fe、Mn等干扰元素。处理某些Fe含量特别高且Ca含量也高的特殊地质样品(如含大量黄铁矿的钙质泥岩、钙质页岩等),若根据传统的阴阳离子交换树脂双柱法,需多次使用阳离子交换树脂分离Fe,步骤较繁琐且Mo回收率也会降低,而根据传统的阴离子交换树脂单柱法,使用1mol/L氢氟酸-0.5mol/L盐酸介质会产生较多CaF_2沉淀影响分离纯化效果。针对此类特殊地质样品,本实验使用同一阴离子树脂柱(AG1-X8,100～200目)对样品进行两次淋洗,第一次使用6mol/L盐酸,第二次使用1mol/L氢氟酸-0.1mol/L盐酸和6mol/L盐酸。结果表明Mo的回收率96%,干扰元素的去除效果好,尤其是Ru的去除率接近100%,比原方法提高了约12%。对实际样品进行实验的结果也显示,Mo的回收率和干扰元素的去除都符合要求,δ~(98/95)Mo测定值与文献报道值一致。改进后的阴离子交换树脂单柱-二次淋洗法适用于Fe、Ca含量较高的特殊样品,降低了分析成本,也适用于绝大多数地质样品。 相似文献
3.
4.
常用锂同位素地质标准物质的多接收器电感耦合等离子体质谱分析研究 总被引：3，自引：3，他引：0
锂同位素研究是非传统稳定同位素地球化学研究的前沿,已广泛应用于从地表到地幔的岩石圈及流体等固体地球科学的研究领域。准确测定锂同位素比值是应用该同位素体系的前提。本文报道了国际上7种常用地质标准物质(BHVO-2、JB-2、BCR-2、AGV-2、NKT-1、L-SVEC、IRMM-016)的锂同位素组成数据。分析中采用硝酸-氢氟酸混合酸消解岩石标准样品,通过3根阳离子交换树脂(AG50W-X8,200~400目)填充的聚丙烯交换柱和石英交换柱对锂进行分离富集,利用Neptune型多接收器电感耦合等离子体质谱(MC-ICPMS)测定锂同位素比值,使用标准-样品交叉法(SSB)校正仪器的质量分馏。实验得到这7种常用地质标准物质的锂同位素组成与测试精度(2SD)分别为:δ7LiBHVO-2—L-SVEC=4.7‰±1.0‰(n=53),δ7LiJB-2—L-SVEC=4.9‰±1.0‰(n=20),δ7LiBCR-2—L-SVEC=4.4‰±0.8‰(n=8),δ7LiAGV-2—L-SVEC=6.1‰±0.4‰(n=14),δ7LiNKT-1—L-SVEC=9.8‰±0.2‰(n=3),δ7LiL-SVEC—L-SVEC=-0.3‰±0.3‰(n=10),δ7LiIRMM-016—L-SVEC=0.0‰±0.5‰(n=10),这些数据在误差范围内与国际上已发表的数据一致。Li同位素分析精度可以达到大约0.5‰,长期的分析精度即外部重现性≤±1.0‰,达到了国际同类实验室水平。7种常用地质标准物质的锂同位素组成数据的发表为锂同位素研究提供了统一的标准,使地质样品的锂同位素数据的质量监控成为可能。在基质效应的研究中,使用不同量的IRMM-016配制的标准溶液过柱,深入探讨了样品量对锂同位素测定值的影响,结果表明,在现有测试精度下,只要分析样品的锂含量达到100μg/L,且不超过树脂的承载量,样品的锂同位素组成在误差范围内与真值吻合,样品量的大小不影响锂同位素测定结果的准确性。 相似文献
5.
详细报道了在低分辨和高分辨模式下运用MC-ICP-MS进行Fe同位素比值高精度测试的方法,对Fe同位素测定过程中谱峰干扰、基质效应、浓度效应、仪器测试的长期重现性等问题进行了评估,并对两种运行模式的测试结果进行了对比.在95%的可信度范围内,所建方法的外部精度优于0.5ε/ainu,达到国际同类实验室的先进水平,并且低分辨和高分辨两种模式下获得的Fe同位素测试结果是一致的.在此基础上对国家地质标准物质GBW07105(玄武岩)和GBW 07111(花岗闪长岩)进行了Fe同位素测定.相对于Fe同位素国际标样IRMM-014,GBW07105的Fe同位素成分为:ε57Fe=1.9±0.3(20),ε56Fe=1.3±0.2(2σ),ε57/56Fe=0.6±0.1(2σ);GBW 07111的Fe同位素成分为:ε57Fe=1.8±0.4(2σ),ε56Fe=1.2±0.2(2σ),ε57/56Fe=0.6±0.1(2σ). 相似文献
6.
Janet M. Hergt L. Paul Bédard Etienne Deloule Klaus Peter Jochum Kathryn L. Linge Paul J. Sylvester Matthias Willbold Jon D. Woodhead 《Geostandards and Geoanalytical Research》2006,30(3):141-142
In 2005 Geostandards and Geoanalytical Research embarked upon a new initiative for its readers. Key researchers in various fields of geoanalytical technique development and their application were identified and invited to provide reviews pertinent to their expertise. As noted in the first of these publications "…instead of revisiting the historical context or decades of development in each analytical technique, the goal here has been to capture a snapshot of "hot topics" across a range of fields as represented in the… literature" (Hergt et al . 2005). Rather than prepare an annual review, a decision was taken earlier this year to provide a biennial summary of progress and accomplishments, in this case for the years 2004–2005. The principal techniques employed in Earth and environmental sciences are covered here, and include laser ablation and multicollector ICP-MS, ICP-AES, thermal ionisation and secondary ion mass spectrometry, as well as neutron activation analysis, X-ray fluorescence and atomic absorption spectrometry. A comprehensive review of the development of reference materials, often essential to these techniques, is also provided. The contributions assembled serve both to keep readers informed of advances they may be unfamiliar with, but also as a means of showcasing examples of the breadth and depth of work being conducted in these fields. 相似文献
7.
A Reflection on Mg, Cd, Ca, Li and Si Isotopic Measurements and Related Reference Materials 总被引：6，自引：1，他引：6
Jean Carignan Damien Cardinal Anton Eisenhauer Albert Galy Mark Rehkamper Frank Wombacher Nathalie Vigier 《Geostandards and Geoanalytical Research》2004,28(1):139-148
This contribution aims to report the reflections we had with the scientific community during two international workshops on reference materials for stable isotopes in Davos (2002) and Nice (2003). After evaluating the isotopic homogeneity of some existing reference materials, based on either certificates, literature data or specific inter-laboratory rounds, we confirm these as primary reference materials or propose new ones relative to which stable isotope compositions should be reported. We propose DSM-3 for Mg, NIST SRM 915a for Ca, L-SVEC for Li and NBS28 for Si. Cadmium does not yet have a well identified delta zero material, although three commercial mono-elemental Cd solutions have yielded the same isotopic composition relative to one another. In order to scale the linearity of any mass spectrometer, some secondary reference materials are also proposed: Cambridge-1 solution for Mg, the "Münster-Cd" and JEPPIM Cd solutions for Cd and the "Big Batch" silicate for Si. The team from Nancy propose to prepare a mixed spike solution for Li isotopes. Well-characterised natural samples such as ocean or continental waters, diatoms, sponges, rocks and minerals are needed to validate the entire analytical procedure, particularly to take into account the effect of sample mineralisation and of chemical manipulations for elemental separation prior to analysis. 相似文献
8.
Precise/ Small Sample Size Determinations of Lithium Isotopic Compositions of Geological Reference Materials and Modern Seawater by MC-ICP-MS 总被引：6，自引：1，他引：6
Alistair B. Jeffcoate Tim Elliott Alex Thomas Claudia Bouman 《Geostandards and Geoanalytical Research》2004,28(1):161-172
The Li isotope ratios of four international rock reference materials, USGS BHVO-2, GSJ JB-2, JG-2, JA-1 and modern seawater (Mediterranean, Pacific and North Atlantic) were determined using multi-collector inductively coupled plasma-mass spectrometry (MC-ICP-MS). These reference materials of natural samples were chosen to span a considerable range in Li isotope ratios and cover several different matrices in order to provide a useful benchmark for future studies. Our new analytical technique achieves significantly higher precision and reproducibility (< ± O.3%o 2s) than previous methods, with the additional advantage of requiring very low sample masses of ca . 2 ng of Li. 相似文献
9.
多接收等离子质谱（MC-ICP-MS )测定Mg同位素初步研究 总被引：3，自引：3，他引：3
常量元素Mg的同位素比值，应用在地球化学上有重要意义。笔者采用“样品-标准”交叉技术，以国际标准SRM980,AIdrich, Romil和实验室标准GSB作为实验材料，探讨浓度和基质效应影响，尝试建立高精度多接收等离子质谱(MC-ICP-MS)测定Mg同位素方法。相对于国际标准物质SRM980，本研究测得的国际标准物质Aldrich的δ26Mg和δ25Mg值分别为（2.64±0.15)‰(2σ）和（1.34±0.09)‰(2σ); Romil的δ26Mg和δ25Mg值分别为（2.46±0.15)‰(2σ）和（1.27±0.08)%(2σ)；国土资源部同位素地质重点实验室的实验室标准GSB的δ26Mg和δ25Mg值分别为（4.05±0.03)‰(2σ)和(2.05±0.03)‰(2σ)。 相似文献
10.
Ti separation was achieved by ion-exchange chromatography using Bio-Rad AG 1-X8 anion-exchange and DGA resins. For high-Fe/Ti and high-Mg/Ti igneous samples, a three-column procedure was required, whereas a two-column procedure was used for low-Fe/Ti and low-Mg/Ti igneous samples. The Ti isotopes were analysed by MC-ICP-MS, and instrumental mass bias was corrected using a 47Ti-49Ti double-spike technique. The 47Ti-49Ti double-spike and SRM 3162a were calibrated using SRM 979-Cr, certificated value 53Cr/52Crtrue = 0.11339. Isobaric interference was evaluated by analysing Alfa-Ti doped with Na, Mg, Ca, and Mo, and results indicate that high concentrations of Na and Mg have no significant effect on Ti isotope analyses; however, Ca and Mo interferences lead to erroneous δ49/47Ti values when Ca/Ti and Mo/Ti ratios exceed 0.01 and 0.1, respectively. Titanium isotopic compositions were determined for 12 igneous reference materials, BCR-2, BHVO-2, GBW07105, AGV-1, AGV-2, W-2, GBW07123, GBW07126, GBW07127, GBW07101, JP-1, and DTS-2b. Samples yield δ49/47Ti (‰) of ?0.035 ± 0.022, ?0.038 ± 0.031, 0.031 ± 0.022, 0.059 ± 0.038, 0.044 ± 0.037, 0.000 ± 0.015, 0.154 ± 0.044, ?0.044 ± 0.018, 0.010 ± 0.022, 0.064 ± 0.043, 0.169 ± 0.034, and ?0.047 ± 0.025 (relative to OL-Ti, ±2SD), respectively; of which isotopic compositions of DTS-2b, JP-1, GBW07101, GBW07105, GBW07123, GBW07126, and GBW07127 are reported for the first time. Standard Alfa-Ti was analysed repeatedly over a ten-month period, indicating a reproducibility of ±0.047 (2SD) for δ49/47Ti, similar to the precisions obtained for geochemical reference materials. 相似文献