Origin of Fe-Ti Oxide Ores in Mafic Intrusions: Evidence from the Panzhihua Intrusion, SW China   总被引：12，自引：0，他引：12  

Pang  Kwan-Nang; Zhou  Mei-Fu; Lindsley  Donald; Zhao  Donggao; Malpas  John 《Journal of Petrology》2008,49(2):295-313

Economic concentrations of Fe–Ti oxides occur as massive,conformable lenses or layers in the lower part of the Panzhihuaintrusion, Emeishan Large Igneous Province, SW China. Mineralchemistry, textures and QUILF equilibria indicate that oxidesin rocks of the intrusion were subjected to extensive subsolidusre-equilibration and exsolution. The primary oxide, reconstructedfrom compositions of titanomagnetite in the ores and associatedintergrowths, is an aluminous titanomagnetite (Usp₄₀) with 40wt % FeO, 34 wt % Fe₂O₃, 16·5 wt % TiO₂, 5·3 wt% Al₂O₃, 3·5 wt % MgO and 0·5 wt % MnO. This compositionis similar to the bulk composition of the oxide ore, as inferredfrom whole-rock data. This similarity strongly suggests thatthe ores formed from accumulation of titanomagnetite crystals,not from immiscible oxide melt as proposed in earlier studies.The occurrence of oxide ores in the lower parts of the Panzhihuaintrusion is best explained by settling and sorting of densetitanomagnetite in the ferrogabbroic parental magma. This magmamust have crystallized Fe–Ti oxides relatively early andabundantly, and is likely to have been enriched in Fe and Tibut poor in SiO₂. These features are consistent with fractionationof mantle-derived melts under relatively high pressures (10kbar), followed by emplacement of the residual magma at 5 kbar.This study provides definitive field and geochemical evidencethat Fe–Ti oxide ores can form by accumulation in ferrogabbro.We suggest that many other massive Fe–Ti oxide depositsmay have formed in a similar fashion and that high concentrationsof phosphorus or carbon, or periodic fluctuation of fO₂ in themagma, are of secondary importance in ore formation. KEY WORDS: ELIP; Fe–Ti oxide ore; layered intrusion; Panzhihua; QUILF  相似文献   

基于色层图与纹理融合的地形晕渲     

宋汉辰  吴玲达  王鹏 《测绘科学》2008,(Z1)

针对三维地形晕渲的具体需求和存在问题,提出了一种基于色层图与纹理融合的晕渲方法。根据自定义或色层表主色调插值生成色彩连续的色层图,对地形高程进行着色;在地表材质分块的基础上,通过计算相邻材质边界上的多重纹理坐标,使用多重纹理映射进行融合过渡;最后给出了实验结果。  相似文献   

物权法对节约集约利用土地的法理解析——以青岛市崂山区分层出让建设用地使用权为例     

万磊 《山东地质》2008,(11):38-39

土地资源具有稀缺性和不可再生性,土地供给日渐紧张,拓展土地利用空间、将土地利用由平面趋向立体化发展的趋势日渐成熟。青岛市崂山区将建设用地使用权分层出让,不但垂范了法规政策,对区域经济的发展也具有很大的现实意义。  相似文献   

流体在岩浆型铬铁矿和铂族元素成矿过程中的作用及意义     

苏本勋  刘霞  袁庆晗  罗扬  潘旗旗  白洋  崔梦萌  肖燕  唐冬梅 《地质学报》2022,96(12):4091-4100

镁铁- 超镁铁岩是揭示地幔物质组成和壳幔相互作用的重要窗口，也是Ni- Cu- PGE- Cr等金属矿产资源的重要载体。不同的镁铁- 超镁铁岩体赋矿特征明显不同：蛇绿岩以产出铬铁矿床为特征，阿拉斯加型岩体主要赋含铂族元素(PGE)矿床，大型层状岩体则可同时产出铬铁矿床、PGE矿床和Cu- Ni硫化物矿床。这种成矿差异显然与赋矿岩体形成的构造背景、母岩浆经历的岩浆演化过程有关，但缺少关键控制因素的研究。前人对上述不同种类矿床的研究工作主要集中于地幔源区的部分熔融、上升过程中或岩浆房内的围岩混染和结晶分异等岩浆过程，而极少关注流体作用。近年来，实验岩石学和岩石地球化学的研究均表明幔源岩浆演化过程中的流体活动可能对成矿元素的富集迁移起到至关重要的作用，同时这些成矿元素的赋存状态和分配系数也在不断更新。厘清Cr和PGE在熔体演化——尤其是流体出溶过程中的地球化学行为，刻画并揭示其迁移富集、分离和再富集的成矿过程及控制因素，已成为当前岩浆矿床研究的热点。本文围绕富水流体与铬铁矿和PGE成矿关系的科学问题，总结了不同镁铁- 超镁铁岩体的成矿差异以及铬铁矿和PGE矿床成矿过程中的流体活动记录，提出流体性质和组分对铬铁矿和PGE迁移富集的控制作用，强调有必要开展蛇绿岩、大型层状镁铁- 超镁铁岩体和阿拉斯加型岩体的对比研究。  相似文献   

On　the　physical　model　of　earthquake　precursor　fields　and　the　mechanism　of　precursors＇timespace　distribution──origin　and　evidences　of　the　strong　body　earthquake──generating　model     

梅世蓉 《地震学报(英文版)》1995,(3)

Ｏｎｔｈｅｐｈｙｓｉｃａｌｍｏｄｅｌｏｆｅａｒｔｈｑｕａｋｅｐｒｅｃｕｒｓｏｒｆｉｅｌｄｓａｎｄｔｈｅｍｅｃｈａｎｉｓｍｏｆｐｒｅｃｕｒｓｏｒｓ＇ｔｉｍｅｓｐａｃｅｄｉｓｔｒｉｂｕｔｉｏｎ──ｏｒｉｇｉｎａｎｄｅｖｉｄｅｎｃｅｓｏｆ　ｔｈｅｓｔｒｏｎ...  相似文献   

Treatment of high fluoride concentration wastewater by layered double hydroxides： Mechanism studies   总被引：1，自引：0，他引：1  

Liang LU Jing HE 《中国地球化学学报》2006,25(B08):160-161

An appropriate concentration of fluoride in drinking water is required to prevent dental cavities, but long-term ingestion of water that contains more than a suitable level of fluoride can cause bone disease and mottling of the teeth. Fluoride ions can be found in wastewater from the fluoride chemical industry, as well as the semiconductor, metal processing, fertilizer, and glass-manufacturing industries. The discharge standard for fluoride in industrial wastewater in China is 10 mg/L. Efficient treatment of fluoride-containing wastewater is therefore of major concern in China, following the rapid development of the fluoride chemical industry. Several methods have been used to remove fluoride from water, such as adsorption, chemical precipitation, electrodialysis, ion exchange and electrochemical processes. Layered double hydroxides （LDHs） are anionic clays with high anion exchange capacities which are effective adsorbents for removal of a variety of anionic pollutants. LDHs have been studied as potential adsorbents for removing toxic anionic species such as CrO4^2-, TcO4^-, SeO3^2-, pesticides, and anionic surfactants from aqueous systems. One of the main attractions of using LDHs for fluoride removal, is that unlike other chemical treatment methods, no chemical sludge should be produced. In the present study, an attempt was made to investigate the mechanism of fluoride removal by LDHs under different conditions using batch methods. In addition, the release of fluoride adsorbed on LDHs by treatment with an aqueous solution of Na2CO3 was studied. The residual fluoride was found to be 10 mg/L in a solution with an initial concentration of 1000 mg/L, which meets the discharge standard for fluoride in industrial wastewater in China.  相似文献   

Structural Evolvement of Heating Treatment of Mg/AI-LDH and Preparation of Mineral Mesoporous Materials     

CHEN Tianhu XU Huifang WANG Yifeng QING Chengsong FAN Mingde CHEN Gang 《《地质学报》英文版》2006,80(2):170-174

Although hydrotalcite, or layered double hydroxides （LDHs）, is not a common mineral, it is an important material that can be easily synthesized in laboratory. In this study, structural evolvement and BET surface area changes of heat treated Mg/AI-LDH is evaluated by XRD, TEM and N2-BET analyses. The results indicate that the magnesium-aluminum LDH with carbonate as interlayer anion, periclase-like oxides was formed at temperatures of 400-800℃. Meanwhile, 2-3 nanometer mesoporous were formed during decomposition of LDH. However, the heat treated samples still preserve the morphology of the original LDH plates. Periclase-like formed from LDH heat treatment may re-hydrolyze and recover the structure of LDH. However, crystallinity of the recovered LDH is lower than that of the original LDH. This heat treatment will result in formation of （Mg, Al）-oxide nano-crystals and nanopores among the nano-crystals. When heating temperature exceeds 1000, the periclase-like （Mg, Al）-oxide is transformed into a composite with periclase （MgO） and spinel phases. The periclase can be re-hydrolyzed and dissolved in HCl solution. After acid treatment, the sample with a high surface area is composed of spinel nano-crystals and nanopores among them. Our results will provide a new and economic way to synthesize mesoporous materials through pathways of phase transformation of precursor materials with different composition.  相似文献   

Analysis of a rigid footing lying on three-layered soil using the finite difference method     

Priti Maheshwari  M. R. Madhav 《Geotechnical and Geological Engineering》2006,24(4):851-869

A numerical procedure is described for the analysis of the vertical deformation and the stress distribution of the strip footings on layered soil media. Three layers of soil with different stiffness are considered with the middle soil layer the thinnest and most stiff layer. The soil media is discretized and using the theory of elasticity, the governing differential equations are obtained in terms of vertical and horizontal displacements. These equations along with appropriate boundary and continuity conditions are solved by using the finite difference method. The vertical and horizontal displacements, strains and stresses are found at various nodes in the soil media. Parametric studies are carried out to study the effect of the placement depth of the middle soil layer, the relative ratios of the moduli of deformation of the soil layers on the vertical displacement of the footing and the vertical stress distribution. These studies reveal that the middle thin but very stiff layer acts like a plate and redistributes the stresses on the lower soft soil layer uniformly. The displacement on the top and bottom of the middle soil layer is almost the same showing that the compression of the middle layer is negligible as it is very stiff.  相似文献   

Cyclicity in the Main and Upper Zones of the Bushveld Complex, South Africa: Crystallization from a Zoned Magma Sheet   总被引：9，自引：0，他引：9  

TEGNER  CHRISTIAN; CAWTHORN  R. GRANT; KRUGER  F. JOHAN 《Journal of Petrology》2006,47(11):2257-2279

The major element composition of plagioclase, pyroxene, olivine,and magnetite, and whole-rock ⁸⁷Sr/⁸⁶Sr data are presented forthe uppermost 2·1 km of the layered mafic rocks (upperMain Zone and Upper Zone) at Bierkraal in the western BushveldComplex. Initial ⁸⁷Sr/⁸⁶Sr ratios are near-constant (0·7073± 0·0001) for 24 samples and imply crystallizationfrom a homogeneous magma sheet without major magma rechargeor assimilation. The 2125 m thick section investigated in drillcore comprises 26 magnetitite and six nelsonite (magnetite–ilmenite–apatite)layers and changes up-section from gabbronorite (An₇₂ plagioclase;Mg# 74 clinopyroxene) to magnetite–ilmenite–apatite–fayaliteferrodiorite (An₄₃; Mg# 5 clinopyroxene; Fo₁ olivine). The overallfractionation trend is, however, interrupted by reversals characterizedby higher An% of plagioclase, higher Mg# of pyroxene and olivine,and higher V₂O₅ of magnetite. In the upper half of the successionthere is also the intermittent presence of cumulus olivine andapatite. These reversals in normal fractionation trends definethe bases of at least nine major cycles. We have calculateda plausible composition for the magma from which this entiresuccession formed. Forward fractional crystallization modelingof this composition predicts an initial increase in total iron,near-constant SiO₂ and an increasing density of the residualmagma before magnetite crystallizes. After magnetite beginsto crystallize the residual magma shows a near-constant totaliron, an increase in SiO₂ and decrease in density. We explainthe observed cyclicity by bottom crystallization. Initiallymagma stratification developed during crystallization of thebasal gabbronorites. Once magnetite began to crystallize, periodicdensity inversion led to mixing with the overlying magma layer,producing mineralogical breaks between fractionation cycles.The magnetitite and nelsonite layers mainly occur within fractionationcycles, not at their bases. In at least two cases, crystallizationof thick magnetitite layers may have lowered the density ofthe basal layer of melt dramatically, and triggered the proposeddensity inversion, resulting in close, but not perfect, coincidenceof mineralogical breaks and packages of magnetitite layers. KEY WORDS: layered intrusion; mineral chemistry; isotopes; magma; convection; differentiation  相似文献   

层柱粘土材料制备与应用研究   总被引：9，自引：1，他引：9  

周春晖  葛忠华  李春生  李小年 《矿物岩石地球化学通报》2002,21(4):242-246

简述了层柱粘土矿物材料研究与应用的现状和进展。利用粘土矿物蒙脱石作母体，通过大体积的铝、锆、硅等交联剂插层可制成层柱多孔材料，在酸催化、氧化还原催化中均有十分广阔的应用前景。研究表明，改进制备工艺后可提高层柱蒙脱石的热稳定性、比表面积和催化活性；通过酸或表面活性剂等预处理，再进行粘土的支撑，可以调节和控制层柱粘土的结构与性能；采用有机改性和模板导向等技术，可获得孔径介于大微孔和中孔之间的新型层柱粘土矿物材料，并应用于大分子催化反应与吸附，为粘土矿物材料合成和应用开辟了新方向。  相似文献