排序方式： 共有15条查询结果，搜索用时 296 毫秒
1.
Low-order stabilized finite element for the full Biot formulation in soil mechanics at finite strain
Lluís Monforte Pedro Navas Josep Maria Carbonell Marcos Arroyo Antonio Gens 《国际地质力学数值与分析法杂志》2019,43(7):1488-1515
This article presents a novel finite element formulation for the Biot equation using low-order elements. Additionally, an extra degree of freedom is introduced to treat the volumetric locking steaming from the effective response of the medium; its balance equation is also stabilized. The accuracy of the proposed formulation is demonstrated by means of numerical analyses. 相似文献
2.
Drying of deformable porous media results in their shrinkage, and it may cause cracking provided that shrinkage deformations are hindered by kinematic constraints. This is the motivation to develop a thermodynamics‐based microporoelasticity model for the assessment of cracking risk in partially saturated porous geomaterials. The study refers to 3D representative volume elements of porous media, including a two‐scale double‐porosity material with a pore network comprising (at the mesoscale) 3D mesocracks in the form of oblate spheroids, and (at the microscale) spherical micropores of different sizes. Surface tensions prevailing in all interfaces between solid, liquid, and gaseous matters are taken into account. To establish a thermodynamics‐based crack propagation criterion for a two‐scale double‐porosity material, the potential energy of the solid is derived, accounting—in particular—for mesocrack geometry changes (main original contribution) and for effective micropore pressures, which depend (due to surface tensions) on the pore radius. Differentiating the potential energy with respect to crack density parameter yields the thermodynamical driving force for crack propagation, which is shown to be governed by an effective macrostrain. It is found that drying‐related stresses in partially saturated mesocracks reduce the cracking risk. The drying‐related effective underpressures in spherical micropores, in turn, result in a tensile eigenstress of the matrix in which the mesocracks are embedded. This way, micropores increase the mesocracking risk. Model application to the assessment of cracking risk during drying of argillite is the topic of the companion paper (Part II). Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
3.
The stability of integration is essential to numerical simulations especially when solving nonlinear problems. In this work, a continuum damage mechanics model proposed by the first author is implemented with an integration method named cutting plane algorithm (CPA) to improve the robustness of the simulation. This integration method is one type of return mapping algorithm that bypasses the need for computing the gradients. We compare the current integration method with the previous direct method, and the result shows that the cutting plane algorithm exhibits excellent performance under large loading rate conditions. To enhance accuracy of the new method, a control procedure is utilized in the implementation of the algorithm based on error analysis. Thereafter, the theory of poromechanics is utilized with the damage model to account for the effects of fluid diffusion. Laboratory tests simulated with finite element method illustrate distinct behaviors of shale with different loading rates and indicate the development of microcrack propagation under triaxial compression. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
4.
An adaptively stabilized finite element scheme is proposed for a strongly coupled hydro‐mechanical problem in fluid‐infiltrating porous solids at finite strain. We first present the derivation of the poromechanics model via mixture theory in large deformation. By exploiting assumed deformation gradient techniques, we develop a numerical procedure capable of simultaneously curing the multiple‐locking phenomena related to shear failure, incompressibility imposed by pore fluid, and/or incompressible solid skeleton and produce solutions that satisfy the inf‐sup condition. The template‐based generic programming and automatic differentiation (AD) techniques used to implement the stabilized model are also highlighted. Finally, numerical examples are given to show the versatility and efficiency of this model. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
5.
This paper presents a comparison of two variational formats for fully saturated porous media subjected to dynamic loading, whereby the general situation of relative fluid acceleration is considered: (1) the classical three‐field ( u , p, w )‐format and (2) a novel two‐field ( u , p)‐format, where the seepage velocity w is a spatially ‘local’ field whose treatment resembles that of internal variables in material models. The limited numerical comparison shows that the ( u , p)‐format competes well with the ( u , p, w )‐format. Indeed, it is consistent with the general acceleration modeling in the full range of permeabilities. Moreover, in the low permeability regime (where the magnitude of w is insignificant), the new format reflects the situation pertinent to ‘added‐mass’ and is more efficient than the classical ( u , p, w )‐format. Finally, the ( u , p)‐formatcan conveniently be implemented in existing FE‐codes based on the ‘added mass’ formulation. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
6.
Analytical solutions are presented for fluid‐saturated linear poroelastic beams under pure bending. The stress‐free boundary condition at the lateral surfaces is satisfied in the St Venant's sense and the Beltrami–Michell compatibility conditions are resolved rigorously, rendering the flexure of the beams analytically tractable. Two sets of formulations are derived based on the coupled and uncoupled diffusion equations respectively. The analytical solutions are compared with three‐dimensional finite element simulations. Both sets of analytical formulations are capable of capturing exactly both the initial (undrained) and the steady‐state (fully drained) deflection of the beams. However, the analytical solutions are found to be deficient during the transient phase. The cause for the deficiency of the transient analytical solutions is discussed. The accuracy of the analytical solutions improves as Poisson's ratio and the compressibility of the constituents of the porous beam increase, where the St Venant's edge effect at the lateral surfaces is mitigated. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
7.
Numerical solutions for problems in coupled poromechanics suffer from spurious pressure oscillations when small time increments are used. This has prompted many researchers to develop methods to overcome these oscillations. In this paper, we present an overview of the methods that in our view are most promising. In particular we investigate several stabilized procedures, namely the fluid pressure Laplacian stabilization (FPL), a stabilization that uses bubble functions to resolve the fine‐scale solution within elements, and a method derived by using finite increment calculus (FIC). On a simple one‐dimensional test problem, we investigate stability of the three methods and show that the approach using bubble functions does not remove oscillations for all time step sizes. On the other hand, the analysis reveals that FIC stabilizes the pressure for all time step sizes, and it leads to a definition of the stabilization parameter in the case of the FPL‐stabilization. Numerical tests in one and two dimensions on 4‐noded bilinear and linear triangular elements confirm the effectiveness of both the FPL‐ and the FIC‐stabilizations schemes for linear and nonlinear problems. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
8.
A micro‐hydromechanical model for granular materials is presented. It combines the discrete element method for the modeling of the solid phase and a pore‐scale finite volume formulation for the flow of an incompressible pore fluid. The coupling equations are derived and contrasted against the equations of conventional poroelasticity. An analogy is found between the discrete element method pore‐scale finite volume coupling and Biot's theory in the limit case of incompressible phases. The simulation of an oedometer test validates the coupling scheme and demonstrates the ability of the model to capture strong poromechanical effects. A detailed analysis of microscale strain and stress confirms the analogy with poroelasticity. An immersed deposition problem is finally simulated and shows the potential of the method to handle phase transitions. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
9.
The damage model presented in this article (named ‘THHMD’ model) is dedicated to non‐isothermal unsaturated porous media. It is formulated by means of three independent strain state variables, which are the thermodynamic conjugates of net stress, suction and thermal stress. The damage variable is a second‐order tensor. Stress/strain relationships are derived from Helmholtz free energy, which is assumed to be the sum of damaged elastic potentials and ‘crack‐closure energies’. Damage is assumed to grow with tensile strains due to net stress, with pore shrinkage due to suction and with thermal dilatation. Specific conductivities are introduced to account for the effects of cracking on the intensification and on the orientation of liquid water and vapor flows. These conductivities depend on damage and internal length parameters. The mechanical aspects of the THHMD model are validated by comparing the results of a triaxial compression test with experimental measurements found in the literature. Parametric studies of damage are performed on three different heating problems related to nuclear waste disposals. Several types of loading and boundary conditions are investigated. The thermal damage potential is thoroughly studied. The THHMD model is expected to be a useful tool in the assessment of the Excavation Damaged Zone, especially in the vicinity of nuclear waste repositories. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
10.
The purpose of this paper is to examine the importance of different possible simplifying approximations when performing numerical simulations of fluid‐filled porous media subjected to dynamic loading. In particular, the relative importance of the various acceleration terms for both the solid and the fluid, especially the convective contribution, is assessed. The porous medium is modelled as a binary mixture of a solid phase, in the sense of a porous skeleton, and a fluid phase that represents both liquid and air in the pores. The solid particles are assumed to be intrinsically incompressible, whereas the fluid is assigned a finite intrinsic compressibility. Finite element (FE) simulations are carried out while assuming material properties and loading conditions representative for a road structure. The results show that, for the range of the material data used in the simulations, omitting the relative acceleration gives differences in the solution of the seepage velocity field, whereas omitting only the convective term does not lead to significant differences. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献