排序方式： 共有18条查询结果，搜索用时 15 毫秒
1.
根据基于两层流体推导的深海内波弱非线性薛定谔(Nonlinear Schrodinger,简称NLS)方程,引进空间啁啾的思想,研究深海区频散效应和非线性效应的作用。文中推导出了频散效应和非线性效应所致啁啾的表达式,采用数值计算方法计算了综合效应产生的总啁啾。分析了频散和非线性以及综合效应所致啁啾在深海内波传播中的演变规律。从空间啁啾的角度,解释中国南海东沙群岛附近深海区内波演变的机理。 相似文献
2.
针对海洋石油管线探测多波束剖面声纳的高速、大容量的实时信号处理任务,以及声纳系统进一步扩展的需求,设计并实现了一种基于IP网络互连的、以并行DSP为处理节点的多波束剖面声纳系统.该系统应用于海底石油管线探测与定位,系统中的每个处理节点与数据采集转换部分采用TCP/IP网络连接,可以通过物理上添加一个或多个处理节点成倍的提高系统的信号处理能力,而在软件上无须大的改动.通过电联调与水槽试验,验证了系统的可行性和稳定性,该设计为高速水声阵列信号实时处理系统提供了一种全新的解决思路. 相似文献
3.
Jonathan M. Bull Martin Gutowski Justin K. Dix Timothy J. Henstock Peter Hogarth Timothy G. Leighton Paul R. White 《Marine Geophysical Researches》2005,26(2-4):157-169
Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce
decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp
system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and
precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity
was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz)
that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive
array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with
each hydrophone group containing four individual elements and a pre-amplifier.
After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver
geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real
Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown
that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal
positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software
aboard the acquisition vessel.
The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that
the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface. 相似文献
4.
Charles W. Finkl Jr. Syed M. Khalil Jeffrey L. Andrews 《Marine Georesources & Geotechnology》2013,31(2):155-173
Erosion of sandy beaches is a worldwide problem that elicits innovative geoengineer‐ing techniques to reduce adverse impacts of shoreline retreat. Beach replenishment has emerged as the “soft”; shore‐stabilization technique of choice for mitigating beach erosion. This method of shore protection involves the addition of sand to the littoral sediment budget for sacrificial purposes. Because inland sand sources are often uneconomical or impractical to use, and known nearshore sources are limited, finding adequate quantities of suitable sand on the inner continental shelf is often vital to beach replenishment projects. The technical studies of survey and materials analysis that identify and delineate usable sand sources are sometimes almost as expensive as small‐project dredging, pumping, and placing the sand on the beach as fill. Inadequate quantity or substandard quality of shelf sand, as well as often‐prohibitive overhead expenses, thus compel shoreline managers to seek suitable sand sources offshore. In the study area off the central‐west coast of Florida, offshore potential borrow areas (PBAs) were identified on the basis of studies conducted in reconnoitory and detailed phases. Sophisticated state‐of‐the‐art equipment used in this investigation provided more detailed subbottom mapping information than is normally obtained with conventional seismic equipment. An example of sand exploration studies was incorporated in a 215‐km2 survey of offshore areas by conducting bathymetric surveys and subbottom seismic profiling, collecting jet probes, grab samples, and vibrocores, and analyzing sediment grading in subsamples from vibrocores. These combined analyses indicated that at least 8.8 ×106 m3 of sand is available in potential borrow areas from 7.0 to 12 km offshore in water depths of 8.0 to 11.5 m. In the PBAs, mean grain size of sand falls into the range 0.13–0.53 mm, sorting averages 0.65–1.31ø, and the overall silt content varies from 3.9–8.5%. High silt contents (13–19%) mapped in some areas make these sedimentary deposits unsuitable as fill for artificial beach renourishment. 相似文献
5.
从非线性薛定谔方程出发,采用分步傅立叶分析方法数值模拟光子晶体光纤中超连续谱的产生,计算、模拟并分析初始啁啾在光子晶体光纤的零色散点对超连续谱演变和带宽的影响.结果表明,非线性作用使频谱分裂成多峰不对称的结构,初始啁啾C的引入能明显的改善超连续谱的带宽和平坦性.由于二阶色散β2=0,三阶色散猹对超连续光谱的展宽影响较大.当β3>0时,C取正值时,随着C的增大,带宽减小; C取负值时,带宽有所增大,平坦性也有改善;β3<0时,无论C取正取负,频谱带宽增大,且平坦性较好. 相似文献
6.
探究孤子自频移现象,从啁啾的角度来解释其产生的原因。运用数学求解及数值模拟方法,通过MATLAB编程画出了啁啾演变图,据此来研究自频移现象。研究结果表明,在高阶非线性效应中,脉冲内拉曼散射、色散和自相位调制共同所致的啁啾,与无拉曼散射效应时产生的啁啾相比,发生一系列新的变化:啁啾的中心发生漂移且图形的前后沿不对称,即负啁啾的峰值的绝对值大于正啁啾的峰值,这说明了脉冲频谱“红移”的谱峰变宽,或者说频谱移向了长波长方向—即人们所说的孤子自频移现象。 相似文献
7.
8.
考虑到精密控制震源特点,研究了多种精密控制震源发射信号的设计方案,并提出离散点拟合精密控制震源信号设计方法.计算表明,按照发射频谱、相关子波形态和发射能量3个方面的评价,离散点拟合精密控制震源信号设计方法可以灵活设计出比较好的精密控制震源发射信号,对提高精密主动地震监测的震相信息分辨率具有实际意义. 相似文献
9.
非线性效应和色散都是影响光脉冲在光纤中传输的重要因素,在反常色散区,色散和非线性效应的相互平衡可实现光孤子传输;在正常色散区,二者的相互作用可用于光脉冲的压缩.因此,两种效应对光脉冲传输的影响一直受到人们的广泛关注.从光脉冲的非线性薛定谔方程出发,在忽略色散的条件下,推导并模拟了自相位调制(SPM)非线性效应下的高斯光脉冲的非线性相移、频率啁啾;数值模拟了SPM下不同最大相移时无啁啾和有正啁啾时高斯光脉冲的频谱.讨论了SPM效应对高斯光脉冲频谱的影响. 相似文献
10.
星载SAR成像参数联合估计方法 总被引：1，自引：1，他引：0
通信系统的不可靠性会造成SAR卫星下发数据出现误码或丢失,从而导致几何参数的解译、计算出现较大的误差或者缺失,限制了SAR数据成像处理及后续利用。针对该问题,提出一种基于回波数据的成像参数联合估计方法。首先通过回波数据进行多普勒中心频率估计和多普勒调频斜率估计;然后,根据SAR多普勒参数特性,建立多普勒参数与几何参数之间的超定方程组,并利用多普勒参数估计值求解方程组反演几何参数;最后,利用多普勒参数估计值和几何参数估计值完成SAR数据成像处理。实验结果表明,本文方法可以获得可靠的多普勒参数估计值和几何参数估计值,从而有效地解决像参数欠缺情况下的星载SAR成像处理问题。 相似文献