钛型吸附剂的表面特性     

谢式南  王俊鹤  周英兰  孙爱平 《中国海洋大学学报(自然科学版)》1990,(3)

用自装的BET容量法装置测定了几种粒状钛型吸附剂的比表面及其孔径分布。测定是在常温减压下进行的。结果表明:钛型吸附剂在加铀海水中的吸铀量与样品的比表面及孔径分布有一定的内在联系。这种表面性质的研究对吸附剂的筛选有重要的指导意义。  相似文献   

新世纪大洋钻探"三角鼎立"中的欧洲联合体     

刘玉柱  高月华 《海洋地质前沿》2002,18(5):19-20

欧洲为了与美国、日本在IODP中处于同等重要的地位，成立了由ODP成员参加的欧洲大洋钻探科学指导委员会（ESCOD）和JEODI组织，并开展了IODP之前的一系列准备活动。在其中的APLACON会议上，论证了IODP中第三类特定钻探平台的必要性，讨论了该类平台在某些研究范围内的重要作用，包括研究地球历史中的极端气候（北极海区）、重建白垩纪－第三纪的水文地理学、气候的快速变化、沉积盆地形成与过程以及固体地球过程等。  相似文献   

黄东海海区总悬浮物散射特性研究   总被引：2，自引：0，他引：2  

刘炜  李铜基  朱建华  陈清莲 《海洋技术学报》2007,26(2):42-46

我国黄东海水体散射特性非常复杂,这是造成该海域水色区划特点显著的原因之一。文中利用2003年4月黄东海试验数据(HD200304)对总悬浮物(TSM,Total Suspended Matter)的后向散射概率~bbs和单位散射系数bs*进行研究。基于对现场数据的统计分析,我们开发了总悬浮物后向散射概率模型,通过相对偏差分析表明,有近90%的样品反演相对偏差控制在±30%之内。对总悬浮物单位散射系数研究时,选择555 nm为参考波段,开发了不同波段间总悬浮物单位散射系数关系模型,通过相对偏差分析表明,有近94%的样品反演相对偏差在±10%之内,反演效果非常好。  相似文献   

礁膜配子放散条件的研究   总被引：2，自引：0，他引：2  

陈昌生 《台湾海峡》1996,15(2):154-158

本文报道了礁膜配子的放散与温度、光照、比重的关系。结果表明，自然海区的礁膜在白天大量放散配子。配子放散的适宜温度为１９－２１℃；光照为２０００－５０００ｌｘ时能促进配子大量放散出来；配子放散的适宜比重为１．０５－１．０２５；这些研究结果将为礁膜人工育苗提供一些科学依据。  相似文献   

Some breakage characteristics of ultra-fine wet grinding with a centrifugal mill     

Heechan Cho  Hoon LeeYeongwoo Lee 《International Journal of Mineral Processing》2006

A centrifugal mill is a high-power intensity media mill that can be used for ultra-fine grinding, employing centrifugal forces generated by gyration of the axis of the mill tube in a circle. The mill charge motion is quite different depending on the ratio of the gyration diameter to the mill diameter (G / D ratio), varying from a motion similar to that of a conventional tumbling media mill to that of a vibration mill. In this study, a centrifugal mill was constructed with an arrangement where the gyration diameter could be readily adjusted. The batch grinding characteristics of three different minerals (limestone, talc and illite) in water with dispersing agent were investigated at various G / D ratios. It was found that the optimum G / D ratio in terms of the specific energy consumption to give a desired fineness of product was different for the three minerals. This was due to their different reactions to the breakage mechanisms provided by the mill charge motion at varying G / D ratios. The size distributions became progressively narrower at increased grinding times, and particles finer than about 0.1 μm were not detected even for prolonged grinding times. Measurement of specific surface areas indicated that this was not due to an artifact of the size measurements by laser diffractometry. This implies that there is a limitation in which particles finer than 0.1 μm are not produced under the conditions tested in this type of mill, but further investigation is needed for experimental verification of this limit of comminution.  相似文献   

A Decision Support System for the Evaluation of Eco-engineering Strategies for Slope Protection     

S. B. Mickovski  L. P. H. Van Beek 《Geotechnical and Geological Engineering》2006,24(3):483-498

A decision support system (DSS) has been developed to assist expert and non-expert users in the evaluation and selection of eco-engineering strategies for slope protection. This DSS combines a qualitative hazard assessment of erosion and mass movements with a detailed catalogue of eco-engineering strategies for slope protection of which the suitability is evaluated in relation to the data entered. The slope decision support system (SDSS) is a knowledge based DSS in which knowledge is stored in frames containing rules that can evaluate the available information for a project, stored as project specific information (PSI) in a data file. The advantages of such a system are that it accepts incomplete information and that the qualitative nature of the information does not instil the user with a sense of unjustified exactitude. By its multidisciplinary and progressive nature, the DSS will be of value during the initial stages of an eco-engineering project when data collection and the potential of different eco-engineering strategies are considered. The accent of the output of the DSS is on the application of eco-engineering strategies for slope protection as an environmentally-friendly solution aiding sustainable development. For its acceptance within the engineering community, the DSS needs to prove its predictive capacity. Therefore, its performance has been benchmarked against successful and unsuccessful cases of slope stabilisation using eco-engineering. The target audience and the areas of application of this DSS are reviewed and the strategies for further development in this area suggested.  相似文献   

类脂化合物单体碳稳定同位素在古气候环境研究中的意义   总被引：4，自引：1，他引：4  

林田  郭志刚  杨作升 《地球科学进展》2005,20(8):910-915

类脂化合物极大地扩展了全球变化研究的深度，尤其是单体碳稳定同位素技术在古气候、古环境重建上有着重要作用。基于近些年来国内外的最新研究成果，就类脂化合物单体碳同位素在古气候环境方面的应用研究进行了较为全面的评述。已有研究表明利用类脂化合物单体碳同位素组成可以追溯到海洋和湖泊环境中陆源有机质的物源，其母源区历史时期 C3、C4植被的变迁以及区域性的古气候、古环境重建。  相似文献   

古代生物分子在第四纪研究中的应用   总被引：4，自引：1，他引：4  

赖旭龙  杨洪 《第四纪研究》2003,23(5):457-470

从第四纪化石和沉积物中获得的古代生物分子为第四纪研究者提供了丰富和独特的有关古代生物、遗传和古环境信息的定量和高分辨率的数据.过去10多年的研究证实来自第四纪材料中的各种古代生物分子的分离、鉴定和应用的能力在不断增加.文章总结了古代生物分子在第四纪研究中的最新进展,主要包括以下几个方面的内容:1)不同类型的古代生物分子在地质体中的保存和降解;2)古DNA和古蛋白序列中的生物遗传学信息;3)单体分子同位素与第四纪古环境和古气候研究;4)建于古代生物分子水平上的第四纪年代学.作者预见对第四纪地层中的原位和分散保存的古代生物分子的研究将在广度上以多分子综合研究而深度上与单体分子同位素技术相结合,为第四纪科学家们提供大量解决地质学和演化生物学问题的高精度数据.随着地球化学和分子生物学技术的不断改进以及人们对古代生物分子的降解过程和机制的进一步理解,对古代生物分子的研究无疑将进一步促进和推动第四纪科学研究的发展.  相似文献   

生物标志化合物与相关的全球变化   总被引：20，自引：9，他引：20  

谢树成  梁斌  郭建秋  易轶  R.P.Evershed  D.Maddy  F.M.Chambers 《第四纪研究》2003,23(5):521-528

在各种地质体中广泛分布的生物标志化合物在全球变化研究中有着广泛应用,特别是在海洋和湖泊沉积物中,研究工作已涉及到古植被、古温度、古降水量、古大气CO₂浓度和古季风等的恢复.文章介绍利用气相色谱仪、气相色谱-质谱联用仪、气相色谱-热转换-同位素比质谱仪分析了一个长40cm泥炭岩芯(约222年)的生物标志化合物的分布及其单体氢同位素.结果显示,不管是生物标志化合物的分布,还是其单体稳定同位素特征都记载了气候(温度)的变化.正构脂肪酸的碳优势指数(CPI值)、正构烷烃C23/C31比值、正构烷烃C23的δD值与温度有很好的对应关系.  相似文献   

The role of sediment specific gravity and availability on cluster evolution     

A. N. Papanicolaou  K. Strom  A. Schuyler  N. Talebbeydokhti 《地球表面变化过程与地形》2003,28(1):69-86

The objective of this experimental study was to account for the role of sediment availability and specific gravity on cluster formation and cluster geometric characteristics (spacing and size). To isolate the effects of sediment availability and specific gravity on cluster evolution, mono‐sized spheres were used to simulate the cluster evolutionary cycle. Overall, twelve experimental runs were carried out in the laboratory flume. Six of these tests were performed by using glass spheres (specific gravity, SG = 2·58) and the other six by employing an equal combination of glass and Teflon spheres (SG = 2·12) of the same diameter to evaluate the role of specific gravity on cluster evolution. The three sediment availability conditions that were investigated here simulated isolated gravel elements, pool–riffle sequences and densely packed gravel‐bed. An advanced image analysis technique was employed to track the evolution of cluster microforms and provide quantitative information about the size and shape of clusters and the number of clusters per unit area. The results of this study showed that: (1) sediment availability affects the architecture and size of cluster microforms; and (2) clusters consisting of mono‐sized sediments start disintegrating at twice the incipient conditions. By performing complementary tests for the isolated gravel elements case, it was found that the evolutionary cycle of individual clusters could be described as follows, in order of increasing stress: no cluster→two particle cluster→comet→triangle→rhomboid→break up. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献