In Memoriam |
| |
| Authors: | Michael J Cruickshank |
| |
| Institution: | 1. McClelland Engineers, Inc. , Houston, Texas, 77081;2. Deep Sea Drilling Project , University of California , La Jolla, California |
| |
| Abstract: | Abstract The engineering properties of deep continental margin sediments were determined on a worldwide basis. Deep Sea Drilling Project (DSDP) core data and material were utilized from over 900 cores obtained from 89 sites, primarily on the continental margins. Cores were recovered from penetrations to 200 m in water depths averaging 3000 m. Supplementary laboratory testing on selected cores was directed toward determining index properties and shear strength properties of the sediments. The study included a literature review of deep‐sea soil properties, the results of which are to be used by DSDP to evaluate foundation conditions for reentry cones with long casing strings. The results will also be used for a feasibility study of an ultradeepwater marine riser and well‐control system. The marine sediments examined can be divided into three main types: clay, calcareous ooze, and siliceous ooze. Sediment distribution consisted of 48% calcareous ooze, 43% clay, 6% siliceous ooze, and 3% volcanic ash. Because of the sample disturbance inherent in the deepwater coring operation, emphasis was placed on analyzing sediment properties not significantly affected by changes in in situ stresses and structure caused by sampling. Averages and ranges in values of water content and unit weight are presented for the three main sediment types. Plasticity and strength characteristics are discussed in detail and the elastic and compression properties are outlined. The geotechnical properties of deep continental margin soils are summarized. |
| |
| Keywords: | |
|
|
