Comparison of vane shear and fall cone strengths of soft marine clay |
| |
| Authors: | Tiesong Lu William R Bryant |
| |
| Institution: | 1. Department of Oceanography , Texas A &2. M University , College Station, Texas, USA;3. M University , College Station, Texas, 77843, USA |
| |
| Abstract: | A total of 1,014 measures of sediment shear strengths were measured by means of miniature vane shear and fall cone tests on five gravity cores collected in Eckernfo‐erde Bay, Baltic Sea. Paired t test was used to compare the shear strengths measured by the two methods. It was found that fall cone strength calculated with Wood's K60value (0.29) overestimates the vane shear strength by 0.15 kPa (a = 0.001) and the sample mean of the fall cone strength is 4.1% higher than the mean of the vane shear strength. However, fall cone strength calculated with Hansbo's K60 value (0.24) underestimates the vane shear strength by 0.88 kPa (a = 0.001), and the sample mean of the fall cone strength is 13.8% less than the mean of the vane shear strength. Both calculated fall cone strengths are significantly different from the vane shear strength, with a p value of less than 0.001. Regression analysis of the Echernfoerde Bay data indicates that a new K60 value is 0.275 with a confidence interval (a = 0.01) from 0.2704 to 0.2786. Paired t test shows that there is no significant difference between miniature vane shear and fall cone tests for these samples if the fall cone strength is calculated with K60 = 0.275. |
| |
| Keywords: | fall cone marine clay miniature vane shear paired t test regression analysis undrained shear strength |
|
|
