Seismic and Petrophysical Relationships from UK Continental Shelf Rocks at Elevated Pressures |
| |
| Authors: | Solomon Assefa Clive Mc Cann Jeremy Sothcott |
| |
| Institution: | Postgraduate Research Institute for Sedimentology The University of Reading Whiteknights , Reading, RG6 6AB, U.K. |
| |
| Abstract: | Abstract There are few published seismic (P- and S-waves) properties for seafloor bedrocks. At low pressures (1 to 10 MPa), velocities and attenuations are determined mainly by open microcracks. At higher pressures, the microcracks close, and the velocities and attenuations depend primarily on the matrix porosity. We have investigated both the relationships between the acoustic, petrophysical, and geological properties of the rocks at 40 MPa pressure and the effect of microcracks on the acoustic properties at 10 MPa pressure. In this paper we discuss the former; the latter will be discussed separately. P- and S-wave velocity and attenuation measurements were carried out on a suite of seabed sedimentary and igneous rocks at effective pressures from 10 to 40 MPa at ultrasonic frequencies. The porosities and permeabilities of the rocks ranged from 0% to 32% and 0 to 110 mDarcy, respectively. Characterization of the rocks revealed that most of the sandstones have a substantial clay content (kaolinite, illite, and chlorite) and fractures. Most of the igneous rocks are chloritized. The seismic properties of the rocks are markedly lower than those of similar continental rocks because of the microporosity formed by the alteration of feldspars, micas, and mafic minerals to clays (e.g., chloritization of pyroxenes) and the corresponding reduction of the elastic moduli. The results of this study suggest that the values of velocities and quality factors used for ocean acoustic propagation models are lower than normally assumed. |
| |
| Keywords: | seismic properties pressure petrophysical properties continental shelf rocks seafloor acoustics |
|
|
