Estimation of site amplifications from shear-wave velocity profiles in Ye?ilyurt and Avc?lar,Istanbul, by frequency–wavenumber analysis of microtremors |
| |
| Authors: | Ebru?Bozda? Email author" target="_blank">Argun?H?Kocao?luEmail author |
| |
| Institution: | (1) Department of Geophysical Engineering, Faculty of Mines, Istanbul Technical University, Maslak, 34390 Istanbul, Turkey |
| |
| Abstract: | During the Mw = 7.4 Izmit earthquake of 17 August 1999, the Ye ilyurt district of Istanbul underwent damage despite the epicentral distance of 90 km. At Avc lar (20 km west of Yeilyurt), the ground motion was even stronger and has caused heavy damage and fatalities. We investigate whether the observed ground motions can be explained by theoretical site amplifications calculated from one-dimensional (1-D) shear-wave velocity models. For this purpose, microtremors recorded with sensor-arrays set up at two sites were analyzed to obtain phase velocity dispersion curves using both the conventional and the Capon frequency–wavenumber (f–k) methods. At the Yeilyurt site, the conventional f–k method offered reliable phase velocity estimations whereas the Capon method showed scatter in the estimations. At the Avclar site, on the other hand, the Capon method provided a higher resolution than the conventional method and hence, allowed estimation of wavelengths up to seven times the array size. At the Yeilyurt site, the shallow shear-wave velocity profile that is correlated with the lithology obtained from boreholes yields a ground motion amplification factor of about 3 at the frequency of 1 Hz. At the Avclar site, the phase velocity dispersion curve is comparable with the one previously obtained using the spatial autocorrelation method. The site amplification factors calculated from the 1-D shear-wave velocity model are around 2–3 at the frequencies of 0.4, 1.2 and 2.3 Hz, which are about 2–3 times smaller than the amplifications obtained from reference-site techniques using weak/strong motion records of earthquakes. We suggest that the discrepancy may be caused by a 2- or 3-D effect introduced by surface and/or bedrock topography not accounted for by the horizontally stratified model considered here. |
| |
| Keywords: | dispersion f– k method microtremors shear-wave velocity site amplification |
| 本文献已被 SpringerLink 等数据库收录！ |
|
