Single piles under horizontal loads in sand: determination of <Emphasis Type="Italic">P</Emphasis>–<Emphasis Type="Italic">Y</Emphasis> curves from the prebored pressuremeter test |
| |
| Authors: | Ali Bouafia |
| |
| Institution: | (1) Department of civil engineering, University of Blida, P. O. Box 270, R. P Blida, 09000, Algeria |
| |
| Abstract: | Lateral load-deflection behaviour of single piles is often analysed in practice on the basis of methods of load-transfer P–Y curves. The paper is aimed at presenting the results of the interpretation of five full-scale horizontal loading tests of
single instrumented piles in two sandy soils, in order to define the parameters of P–Y curves, namely the initial lateral reaction modulus and the lateral soil resistance, in correlation with the pressuremeter
test parameters. P–Y curve parameters were found varying as a power of lateral pile/soil stiffness, on the basis of which hyperbolic P–Y curves in sand were proposed. The predictive capabilities of the proposed P–Y curves were assessed by predicting the soil/pile response in full-scale tests as well as in centrifuge tests and a very good
agreement was found between the computed deflections and bending moments, and the measured ones. Small-sized database of full-scale
pile loading tests in sand was built and a comparative study of some commonly used P–Y curve methods was undertaken. Moreover, it was shown that the load-deflection curves of these test piles may be normalised
in a practical form for an approximate evaluation of pile deflection in a preliminary stage of pile design. At last, a parametric
study undertaken on the basis of the proposed P–Y curves showed the significant influence of the lateral pile/soil stiffness on the non-linear load-deflection response. |
| |
| Keywords: | Lateral loading test Lateral reaction modulus P– Y curves Pressuremeter test Sand Single pile |
| 本文献已被 SpringerLink 等数据库收录！ |
|
