Rugate filters for OH-suppressed imaging at near-infrared wavelengths |
| |
| Authors: | Alison R Offer & Joss Bland-Hawthorn |
| |
| Institution: | Anglo-Australian Telescope, Siding Spring Observatory, Coonabarabran, NSW 2357, Australia,;Anglo-Australian Observatory, PO Box 296, Epping, NSW 2121, Australia |
| |
| Abstract: | Ground-based observations at near-infrared wavelengths are severely affected by atmospheric OH bands. Many authors have recognized the potential gains in sensitivity from suppressing these features. Dispersive instruments show some promise but are both expensive and complicated to build. OH suppression filters using single or periodic notches have the advantage of simplicity but significant gains have not yet been realized. Rugate filters (with graded index inhomogeneous coatings) offer key advantages for astronomical imaging. It is possible to produce a transmission profile comprising a series of irregular and sharply defined bandpasses. We demonstrate through numerical simulation of rugate filters that it should be possible to achieve 95 per cent suppression of the OH features in the J photometric band, while retaining roughly half of the spectral coverage. This would lead to extraordinary gains in sensitivity even for observations of continuum sources. In addition, these filters allow longer exposures before the detector saturates on the sky background. I - and z -band filters can also be envisaged. In 1-arcsec seeing, a J -band rugate filter used in conjunction with a 4-m telescope would detect a J = 23 continuum source at 5.0σ in a single 10-min exposure. In comparison, a conventional J filter requires multiple exposures for a 10-min integration time and achieves only a 2.5σ detection. For emission-line sources, the rugate filter has an even bigger advantage over conventional filters, with a fourfold increase in signal-to-noise ratio possible in certain instances. Astrophysical studies that could benefit from rugate filters are searches for very low-mass stars and galaxy evolution out to z = 3. |
| |
| Keywords: | atmospheric effects instrumentation: miscellaneous methods: analytical techniques: image processing techniques: spectroscopic infrared: general |
|
|
