| 煤层顶板分段压裂水平井地质适应性分析与施工参数优化 |
| |
| 引用本文： | 姜在炳,李浩哲,许耀波,张群,李贵红,范耀,降文萍,舒建生,庞涛,程斌.煤层顶板分段压裂水平井地质适应性分析与施工参数优化[J].煤田地质与勘探,2022,50(3):183-192. |
| |
| 作者姓名： | 姜在炳 李浩哲 许耀波 张群 李贵红 范耀 降文萍 舒建生 庞涛 程斌 |
| |
| 作者单位： | 中煤科工集团西安研究院有限公司 |
| |
| 基金项目： | 国家科技重大专项课题(2016ZX05045-002)；;国家自然科学基金面上项目((51874349)； |
| |
| 摘 要： | 煤层顶板分段压裂水平井是实现碎软低渗煤层煤层气高效抽采的有效技术。依托“十三五”国家科技重大专项课题，围绕煤层顶板分段压裂水平井煤层气高效抽采技术，采用理论分析、数值模拟等手段，对比不同地应力状态下裂缝的穿层扩展形态，研究水平井布井方位与最小水平主应力方向夹角对裂缝转向扩展的影响，分析多簇射孔条件下裂缝的竞争扩展现象。结果表明:(1)煤层顶板分段压裂水平井技术应用于碎软低渗煤层煤层气开发具有避免钻井液污染储层、提高水平井钻井施工安全性、提高固井质量、提高压裂改造效果、控制煤粉产出等优势。(2)地应力是裂缝穿层扩展的关键控制因素。为保证裂缝穿层扩展，垂向应力需大于最小水平主应力，顶板最小水平主应力需大于煤层，并且层间应力差为1~3 MPa时，既能够保证裂缝的穿层扩展效果，也能避免裂缝的起裂和延伸压力过高；“上覆岩层–顶板–煤层”应力剖面为“低–高–中”型时，水平井与煤层顶面的距离对于裂缝的穿层扩展效果影响较大；推荐水平井水平段与煤层顶面距离小于2.0 m。(3)水平井布井方位与最小水平主应力方向夹角越大，裂缝转向半径和转向距离越大，在压裂段间距相同的条件下，夹角为45°时缝间干扰程度比夹角为0°时强，不利于后续压裂段裂缝扩展，建议水平井布井方位与最小水平主应力方向夹角±15°以内。(4)对于分段多簇压裂，缝间应力干扰、压裂液流动摩阻、射孔孔眼摩阻共同导致各射孔簇裂缝非均匀扩展，可通过限流压裂、裂缝暂堵等手段促进裂缝均匀扩展。(5)工程试验取得了良好的产气效果，裂缝延伸特征与理论研究吻合度高。研究成果可为煤层顶板水平井的施工参数优化设计和推广应用提供借鉴。
|
| 关 键 词： | 煤层顶板 水平井 地质适应性 裂缝扩展 分段多簇压裂 煤层气 |
| 收稿时间： | 2022-01-15 |
Geological adaptability analysis and operational parameter optimization for staged fracturing horizontal wells in coal seam roof |
| |
| Abstract: | The technique of staged fracturing horizontal wells in coal seam roof is effective for efficient extraction of coalbed methane (CBM) in broken soft and low-permeability coal seams. With the help of the major national science and technology projects of the 13th Five Year Plan for National Economic and Social Development, the efficient extraction technology of CBM by staged fracturing horizontal wells in coal seam roof was studied. By using theoretical analysis and numerical simulation, the fracture propagation patterns in different in-situ stress states were compared, and the influence of the angle between the horizontal well layout orientation and the minimum horizontal principal stress on the fracture deflection and propagation was studied. The competitive propagation phenomenon of fractures under the condition of multi-cluster perforation was also analyzed. The results show that: (1) the staged fracturing horizontal well in coal seam roof applied to CBM development in broken, soft and low-permeability coal seams can avoid contamination of reservoirs by drilling fluid, improve the safety in horizontal well drilling, cementing, and the effect of fracturing transformation, and controlling the output of coal fine. (2) In-situ stress is the key controlling factor for fracture propagation. In order to ensure the crack propagation through the bedding plane interface, the vertical stress must be greater than the minimum horizontal stress, and the minimum horizontal stress of the roof must be greater than that of the coal seam. The interlayer stress difference of 1-3 MPa can not only ensure the effect of through-layer propagation of fractures, but also avoid excessive fracture initiation and extension pressure. When the stress profile of “overlying rock-roof-coal seam” is “low-high-medium” type, the distance between the horizontal well and the top surface of the coal seam has a great influence on fracture propagation. It is recommended that the distance between the horizontal section of the horizontal well and the top surface of the coal seam should be less than 2.0 m. (3) The larger the angle between the horizontal well and the minimum horizontal stress, the greater the fracture turning radius and turning distance. With the same fracturing spacing, the fracture interference is stronger at an angle of 45° than at an angle of 0°, which is not conducive to the propagation of subsequent fractures. It is recommended that the angle between the horizontal well and the minimum horizontal stress should be within ± 15°. (4) For staged multi-cluster fracturing, the fracture stress interference, fracturing fluid flow friction, and perforation friction jointly lead to non-uniform propagation of fractures for each perforation cluster, which can be controlled by using limited entry fracturing, temporary plugging, etc., to promote the uniform propagation of fractures. (5) The pilot test has achieved good gas production, and the fracture extension characteristics are in good agreement with the theoretical research. The research results can provide reference for the optimization design and application of operational parameters of horizontal wells in the coal seam roof. |
| |
| Keywords: | |
|
| 点击此处可从《煤田地质与勘探》浏览原始摘要信息 |
| 点击此处可从《煤田地质与勘探》下载免费的PDF全文 |
|
