A simple shaker table for seismometer calibration |
| |
| Authors: | Frederick K Duennebier George H Sutton David Harris David A Byrne |
| |
| Institution: | (1) Hawaii Institute of Geophysics, University of Hawaii, 96822 Honolulu, Hawaii, U.S.A.;(2) Present address: Rondout Associates, Inc., P.O. Box 224, 12484 Stone Ridge, N.Y., U.S.A. |
| |
| Abstract: | A unique and simple shaker table (shake table or shaking table), designed, constructed, and installed at the Hawaii Institute of Geophysics, has proven to be a valuable aid in testing and calibrating short period seismometers, as well as ocean bottom and ocean sub-bottom seismometer/tilt meter packages. It consists of a platform suspended in a stairwell by a single elastic cord (10 m extended length) driven by GeoSpace HS-10 geophones. Platform motion is monitored by orthogonal reference geophones and tilt meters. The relatively low natural periods of the platform, about 1.9 sec vertical and 6.5 sec horizontal, provide sufficient isolation from local vibrations that calibration can be made near operational amplitudes. Vertical or horizontal driver geophones can be driven by a commercial signal generator or white noise generator, or from magnetic tape output. The table can also be tilted with respect to the drivers to determine tilt tolerances and to calibrate tilt meters. A Hewlett-Packard 3582-A spectrum analyzer, used to analyze both reference and output signals, provides near real-time system cabibration and is an efficient means for investigating parasitic system resonances. The analyzer can also provide a white noise signal source to the driver geophones.Hawaii Institute of Geophysics Contribution 1443. |
| |
| Keywords: | |
| 本文献已被 SpringerLink 等数据库收录！ |
|
