X-ray characterization of thin foil gold mirrors of a soft X-ray telescope for ASTROSAT |
| |
| Authors: | Archna Sagdeo S K Rai Gyan S Lodha K P Singh Nisha Yadav R Dhawan Umesh Tonpe M N Vahia |
| |
| Institution: | (1) X-ray Optics Section, Raja Rammana Centre For Advanced Technology, Indore, 452013, India;(2) Department of Astronomy & Astrophysics, Tata Institute of Fundamental Research, Homi Bhabha Road, Mumbai, 400005, India |
| |
| Abstract: | X-ray reflectivity measurements were performed on several thin foil gold mirrors fabricated in TIFR for a Soft X-ray Imaging
Telescope. The mirrors were made from thin aluminum foils with a reflecting layer of sputtered gold transferred from a smooth
glass mandrel using an epoxy. X-ray reflectivity measurements were performed on a sample of randomly selected mirrors using
CuK
α
(8.05 keV), CrK
α
(5.41 keV) X-rays and also at several energies in the energy range of 155–300 eV using the synchrotron source Indus-1. It
was found that the roughness of the low-density top gold layer as obtained from the fitting of X-ray reflectivity data for
CuK
α
radiation is relatively more as compared to that obtained from the CrK
α
radiation. This indicates that in the mirrors made by this process, the upper surfaces are smoother as compared to the deeper
layers. It was also observed that the critical angle almost vanishes in the very low energy range of 290–300 eV due to strong
absorption effects of the low density material sitting on top of these mirrors. Due to this absorption effect, efficiency
of these mirrors reduces in this energy range. This is first time that reflectivity measurements are being reported for very
soft X-rays (≤ 300 eV) for mirrors made for any X-ray astronomy mission. |
| |
| Keywords: | |
| 本文献已被 SpringerLink 等数据库收录！ |
|
