首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于系列Drucker-Prager破坏准则评述土坡的稳定性
引用本文:杨雪强,凌平平,向胜华.基于系列Drucker-Prager破坏准则评述土坡的稳定性[J].岩土力学,2009,30(4):865-870.
作者姓名:杨雪强  凌平平  向胜华
作者单位:1. 广东工业大学,建设学院,广州,510006
2. 华中科技大学,武昌分校,武汉,430068
3. 河南省煤田地质局资源环境调查中心,郑州,450000
摘    要:各种在? 平面上等效面积的Drucker-Prager屈服准则,如DP4(Drucker-Prager与Mohr-Coulomb两屈服准则在? 平面上的投影面积相等)、DP5(Drucker-Prager与Matsuoka-Nakai两屈服准则在? 平面上的投影面积相等)和DP6(Drucker-Prager与Lade-Duncan两屈服准则在? 平面上的投影面积相等)等模型都不同程度地模拟了平面应变条件下土体的破坏强度,这就是为什么等效面积的Drucker-Prager屈服准则在二维土坡稳定分析中被推广应用的原因。结合砂土的真三轴强度破坏试验结果,从量化角度论证了DP4模型求出的土坡安全系数可能会保守一些,而DP5和DP6两模型求出的土坡安全系数可能会更真实一些,能更好地发挥材料的承载潜力,因而进一步改善了土坡稳定安全系数的计算精度。

关 键 词:Drucker-Prager屈服准则  强度折减有限元法  土坡稳定  安全系数
收稿时间:2007-11-01

Comments on slope stability based on a series of Drucker-Prager failure criteria
YANG Xue-qiang,LING Ping-ping,XIANG Sheng-hua.Comments on slope stability based on a series of Drucker-Prager failure criteria[J].Rock and Soil Mechanics,2009,30(4):865-870.
Authors:YANG Xue-qiang  LING Ping-ping  XIANG Sheng-hua
Institution:1. Guangdong University of Technology, Guangzhou 510006, China; 2. Wuchang Branch, Huazhong University of Science and Technology, Wuhan 430068, China; 3. Resources and Environment Investigation Center, Henan Provincial Coalfield Geology Bureau, Zhengzhou 450000, China
Abstract:Different equivalent area Drucker-Prager yield criteria on? plane, such as DP4(meaning projection areas of Drucker-Prager and Mohr-Coulomb yield criteria being equal on ? plane) , DP5(meaning projection areas of Drucker-Prager and Matsuoka-Nakai yield criteria being equal on? plane) and DP6(meaning projection areas of Drucker-Prager and Lade-Duncan yield criteria being equal on ? plane) yield criteria, can give a approximately estimation for soil failure strength under plane strain condition, this is why these equivalent area Drucker-Prager yield criteria are widely used in two-dimensional slope stability analyses. Combined true triaxial strength failure tests of sand, it is demonstrated from quantitative point that DP4 yield criterion is conservative for safety factor prediction of slope stability; whereas DP5 and DP6 yield criteria, which will exert soil shear strength more effectively under plane strain status, both give a better safety factor predictions for slope stability analyses, thus computation precision of slope safety factor is further improved by using DP5 and DP6 yield criteria in the end.
Keywords:Drucker-Prager yield criterion  strength reduction finite element method  slope stability  safety factor
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《岩土力学》浏览原始摘要信息
点击此处可从《岩土力学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号