首页 | 本学科首页   官方微博 | 高级检索  
     检索      


Application of the Dynamic Cone Penetrometer (DCP) for determination of the engineering parameters of sandy soils
Authors:SD Mohammadi  MR Nikoudel  H Rahimi  M Khamehchiyan
Institution:aDepartment of Engineering Geology, Tarbiat Modares University, Tehran, Iran;bDepartment of Irrigation Engineering, Tehran University, Tehran, Iran
Abstract:Determination of the in situ engineering properties of foundation materials has always been a challenge for geotechnical engineers and, thus, several methods have been developed so far. Dynamic Cone Penetration (DCP) test is one of the most versatile amongst them. In the present research, a light weight simple DCP device was developed and used for evaluation of the engineering properties of sandy soils in laboratory conditions. The device consisted of an 8-kg hammer that drops over a height of 575 mm, and drives a 60° cone tip with 20 mm base diameter into the ground. To control the validation of the results, laboratory direct shear and plate load tests were used as reference tests. The soil sample was a poorly graded sandy soil (SP) taken from alluvial deposits of the Tehran plain. All DCP tests and PLTs were undertaken on compacted soil in a mould with 700 mm diameter and 700 mm height. Based on the results of the experiments, the relationships between Dynamic Penetration Index (DPI), relative density (Dr), modulus of elasticity (E), shear modulus (G), modulus of subgrade reaction (KS), and the friction angle of the soil were obtained with a high coefficient of determination (> 90%). The repeatability of the test results was also evaluated by calculating the coefficient of variations (Cv), which was less than 30% for all tests.
Keywords:Dynamic Cone Penetrometer (DCP)  Poorly graded sandy soil (SP)  Dynamic Penetration Index (DPI)  Index Parameters  Coefficient of variations (Cv)
本文献已被 ScienceDirect 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号