Experimental Study of Mechanical Behaviour of Rock Joints Under Cyclic Loading |
| |
| Authors: | M K Jafari F Pellet M Boulon K Amini Hosseini |
| |
| Institution: | (1) International Institute of Earthquake Engineering and Seismology, Tehran, Iran;(2) Laboratory 3S, University Joseph Fourier, Grenoble, France |
| |
| Abstract: | Summary Evaluation of the effects of small repetitive earthquakes on the strength parameters of rock joints in active seismic zones is of interest of the designers of underground constructions. In order to evaluate these effects, it is necessary to study the behaviour of rock joints under dynamic and cyclic loadings. This paper presents the results of a systematic study on the behaviour of artificial rock joints subjected to cyclic shearing. More than 30 identical replicas have been tested using triaxial compression devices under different conditions of monotonic and cyclic loading. At the first stage a few samples have been tested in monotonic loading modes under various confining pressures and rate of displacement. In the second series of tests, small cyclic loads were applied on the samples for increasing number of cycles, frequency levels and stress amplitudes. These were then followed by monotonic loading again. The variations of maximum and residual shear strengths for each test have been studied. The results show increase of shear strength as a result of the increase in confining pressure and they display decrease of shear strength due to the increase of rate of loading, number of cycles, frequency levels and stress amplitudes. |
| |
| Keywords: | : Roughness second order asperities damage rate of loading number of cycles frequency level stress amplitude |
| 本文献已被 SpringerLink 等数据库收录！ |
|
