| Abstract: | This paper presents the results of a pilot test conducted for evaluating the energy dissipation behaviour of shear panels made of low yield steel whose 0.2 per cent offset yield stress is 120 MPa. A total of six full-scale shear panels were tested with the loading condition, stiffener spacing, and magnitude of axial force as test variables. The shear panels tested yielded at a shear force that is approximately 1/3 of the yield shear force of equivalent shear panels made of common mild steel. Shear panels with proper stiffener arrangement exhibited stable hysteresis, thus ensuring large energy dissipation capacity. Sufficient strain hardening was observed in the shear panels tested, with their energy dissipation capacity about 1.5 times larger than that of an equivalent linear-elastic and perfect-plastic system. Plate buckling did not lead the shear panels to immediate degradation in their energy dissipation capacity. Post-buckling resistance was found to be a subject that requires further studies for quantifying the performance of shear panels made of low yield stress steel as hysteretic dampers. |
