3D segmentation of single trees exploiting full waveform LIDAR data |
| |
| Authors: | J Reitberger Cl Schnörr P Krzystek U Stilla |
| |
| Institution: | 1. GIPSA-Lab, 11 rue des Mathématiques, 38400 Saint Martin d''Hères, France;2. Department of Global Ecology, Carnegie Institution for Science, 260 Panama Street, Stanford, CA 94305, USA;3. CESBIO, 18 avenue Edouard Belin, 31400 Toulouse, France;4. Technical University of Catalonia (UPC), Jordi Girona 1-3, edifici D5, 08034 Barcelona, Spain;5. Faculty of Electrical and Computer Engineering, University of Iceland, Reykjavík, Iceland;1. Department of Geographical Sciences, University of Maryland, 2181 Lefrak Hall, College Park, MD 20742, USA;2. Goddard Space Flight Center, Greenbelt, MD, USA |
| |
| Abstract: | This paper highlights a novel segmentation approach for single trees from LIDAR data and compares the results acquired both from first/last pulse and full waveform data. In a first step, a conventional watershed-based segmentation procedure is set up, which robustly interpolates the canopy height model from the LIDAR data and identifies possible stem positions of the tallest trees in the segments calculated from the local maxima of the canopy height model. Secondly, this segmentation approach is combined with a special stem detection method. Stem positions in the segments of the watershed segmentation are detected by hierarchically clustering points below the crown base height and reconstructing the stems with a robust RANSAC-based estimation of the stem points. Finally, a new three-dimensional (3D) segmentation of single trees is implemented using normalized cut segmentation. This tackles the problem of segmenting small trees below the canopy height model. The key idea is to subdivide the tree area in a voxel space and to set up a bipartite graph which is formed by the voxels and similarity measures between the voxels. Normalized cut segmentation divides the graph hierarchically into segments which have a minimum similarity with each other and whose members (= voxels) have a maximum similarity. The solution is found by solving a corresponding generalized eigenvalue problem and an appropriate binarization of the solution vector. Experiments were conducted in the Bavarian Forest National Park with conventional first/last pulse data and full waveform LIDAR data. The first/last pulse data were collected in a flight with the Falcon II system from TopoSys in a leaf-on situation at a point density of 10 points/m2. Full waveform data were captured with the Riegl LMS-Q560 scanner at a point density of 25 points/m2 (leaf-off and leaf-on) and at a point density of 10 points/m2 (leaf-on). The study results prove that the new 3D segmentation approach is capable of detecting small trees in the lower forest layer. So far, this has been practically impossible if tree segmentation techniques based on the canopy height model were applied to LIDAR data. Compared to a standard watershed segmentation procedure, the combination of the stem detection method and normalized cut segmentation leads to the best segmentation results and is superior in the best case by 12%. Moreover, the experiments show clearly that using full waveform data is superior to using first/last pulse data. |
| |
| Keywords: | |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
