| Abstract: | Oil sands are dense granular materials with interlocked structure and clay shales are heavily overconsolidated clays. They are classified as structured soil or weak rock, exhibiting high peak strength with severe softening and dilation, particularly at low confining stress. The triaxial compression test results indicate that both materials yield linear Mohr–Coulomb envelopes with an apparent cohesion for peak and residual strengths. However, the strength components mobilized from these two materials are very different. This paper investigates if these strength parameters are intrinsic properties or responses derived in triaxial compression conditions. Computer tomography scanning technique is used to aid in examining the micro‐structural features of the sheared specimens such as shear banding pattern, shear band thickness, spatial porosity distributions inside and outside shear bands. These micro‐structural features are used to explain the macro‐deformation response observed in the triaxial compression tests. Mobilization of strength components derived from interlocked structure, cementation, dilation, rolling and critical state are analysed for pre‐, post‐peak softening and residual stages. It is found that the empirical correlation such as Mohr–Coulomb failure criterion based on triaxial compression test results does not necessarily reflect the intrinsic properties of the test materials. Testing conditions are embedded in the empirical correlation. Copyright © 2001 John Wiley & Sons, Ltd. |
