Stratal attributes and evolution of asymmetric inner- and outer-bend levee deposits associated with an ancient deep-water channel-levee complex within the Isaac Formation, southern Canada |
| |
| Authors: | Zishann A Khan RWC Arnott |
| |
| Institution: | Department of Earth Science and Ottawa/Carleton Geosciences Centre, University of Ottawa, Ottawa, ON K1N 6N5, Canada |
| |
| Abstract: | Isaac Channel 3 is a rare outcrop example of a perpendicular cut through a sinuous deep-water channel, and also where levee deposits formed on opposite sides of the channel are well exposed. Strata flanking the outer- and inner-bend margin of the channel show important differences in lithofacies, architecture and association with channel-fill strata. Proximal outer-bend levee deposits are sand-rich (N:G up to 0.68) and comprise medium- to thick-bedded, Ta-d turbidites interstratified with thinly-bedded, Tcd turbidites. The thicker-bedded deposits show lateral variation in grain size and thickness over hundreds of meters whereas thin-bedded strata thin and fine negligibly over similar distances. The distal outer-bend levee (up to 700 m laterally away from the channel) consists predominantly of thin-bedded turbidites interstratified with up to 5 m thick coarse-grained splay deposits. In contrast to the outer-bend, the inner-bend levee deposits are significantly more mud-rich (N:G as low as 0.15) and consist mostly of thin-bedded, Tcd turbidites with less common thicker-bedded, Ta-d turbidites. Lateral thinning and fining trends associated with these less common thicker-bedded deposits occur more rapidly than their outer-bend counterparts.Erosion associated with lateral migration of the channel axis produced a sharp contact along the outer-bend channel margin causing coarse-grained channel-fill deposits to be in erosional contact with levee deposits. This suggests that the crest of the outer-bend levee was elevated above the channel floor and produced a channel margin upon which channel-fill strata onlapped. Positive topography is interpreted to have developed by overspilling processes that deposited abundant sand on the outer-bend levee while the majority of the flow continued through the channel bend and bypassed to areas further downslope. In contrast, some thick-bedded, amalgamated channel-fill deposits in the axial channel area grade laterally over 140 m into thinly-bedded turbidites on the inner-bend levee. The lack of channel-fill on lap relationships implies that topography along the inner bend was sufficiently subtle that at least some flows were able to expand laterally and over the overbank area without becoming separated from the main throughgoing channel flow.Stratal relationships observed in Isaac Channel Complex 3 suggests three main episodes of channel-levee growth that were each initiated by a period of increased levee relief followed by channel filling and distal levee deposition. This consistent depositional history points to the regular variations, in both time and space, of sediment transport and deposition in a deep-marine sinuous channel-levee system. |
| |
| Keywords: | Deep-water levees Lateral stratigraphic trends Turbidites Windermere Supergroup Isaac Formation Channel-levee evolution |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
