首页 | 本学科首页   官方微博 | 高级检索  
     检索      

460铀钼矿床综合回收初步研究
引用本文:沈光银.460铀钼矿床综合回收初步研究[J].地质找矿论丛,2010,25(1):76-81.
作者姓名:沈光银
作者单位:天津华北地质勘查总院,天津,301800
基金项目:致谢:中核沽源铀业有限责任公司总工程师谢飞云教授认真审阅了全文,并提出宝贵的修改意见,在此表示衷心的感谢!
摘    要:460铀钼矿床综合回收是采用铀钼矿样和钼矿样分别浸出→固液分离→两种浸出液混合→萃取和反萃取铀钼→分别精制铀钼产品的水冶工艺流程。铀钼矿的铀钼浸出率分别达到90%和75%以上,钼矿样钼的浸出率达70%以上,取得了稳定的工艺参数;铀钼分离取得了较好的结果,制出了合格的铀、钼产品。

关 键 词:工艺流程  浸出液  铀钼分离  萃取  反萃取  铀钼产品
收稿时间:2009/2/13 0:00:00

THE INITIATIVE RESEARCH ON COMPREHENSIVE RECOVERY OF URANIUM MOLYBDENUM DEPOSIT 460
SHEN Guang-yin.THE INITIATIVE RESEARCH ON COMPREHENSIVE RECOVERY OF URANIUM MOLYBDENUM DEPOSIT 460[J].Contributions to Geology and Mineral Resources Research,2010,25(1):76-81.
Authors:SHEN Guang-yin
Institution:SHEN Guang-yin (Tianjin North China Geological Exploration General Institute, Tianjin 301800, China)
Abstract:The comprehensive recovery of uranium and molybdenum from the ore deposit 460 adopts the water treating process flow, respective leaching of U-Mo ore sample and Mo ore sample separation of the solid and sulution- admixture of the dissolved uranium and molybdenum- extraction & anti-extraction of uranium molybdenum- separate refinement of uranium and molybdenum products. Extraction rate of uranium and molybdenum from the U-Mo sample is above 90% and 75% respectively and extraction rate of molybdenum from the Mo sample above 70%. Uranium and molybdenum is better separated and the product is qualified.
Keywords:process flow  solution  uranium-solybdenum separation  extraction & anti-extraction  uranium and molybdenum products
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《地质找矿论丛》浏览原始摘要信息
点击此处可从《地质找矿论丛》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号