| 南堡35-2-A6mh井复杂套铣工艺探讨 |
| |
| 引用本文： | 魏刚,邵明仁,张春琳.南堡35-2-A6mh井复杂套铣工艺探讨[J].海洋地质译丛,2010(1):101-104. |
| |
| 作者姓名： | 魏刚 邵明仁 张春琳 |
| |
| 作者单位： | [1]中海石油基地集团监督监理技术公司,天津塘沽300452 [2]中海石油基地集团采油技术服务公司,天津塘沽300452 |
| |
| 摘 要： | 南堡35-2-A6mh井设计为一口多底水平分支井，下主支完成后，通过下入膨胀管，斜向器进行开窗侧钻上主支作业，并在上主支下入φ177．8mm／尾管，然后套铣尾管及斜向器沟通上、下主支。介绍了NB35-2-A6mh井套铣尾管及斜向器的作业难点及现场施工作业中遇到的问题，探讨了该井未套铣成功的原因，并提出几点保证套铣作业顺利进行的建议，为以后海上4级完井作业中套铣尾管及斜向器提供借鉴和参考。
|
| 关 键 词： | 多底井 套铣 斜向器 钻井参数 |
The discussion of complex washover technology applied to NB35 - 2 - A6mh well |
| |
| Authors: | Wei Gang Shao Mingren Zhang Chunlin |
| |
| Institution: | 1. CNOOC Energy Technology ＆ Services Ltd. Supervision and Technology Co. , Tanggu 300452; 2. CNCC Energy Technology ＆ Services Ltd. - Oil field Technology Service Co. , Tanggu 300452) |
| |
| Abstract: | NB35- 2- A6mh well is a multilateral well. Run in expandable tubular and whipstock to drill the up-lateral and run in theφ177.8 mm liner after the completion of the down-lateral, then washover the liner and the whipstock to connect the up-lateral and the down-lateral. In this thesis, the complexity and the field operation＇s problems of the washover liner and the whipstock are introduced, the reason of the unsuccessful washover is discussed, and some suggestions to assure washover are made. All of these can offer a reference for washover liner and whipstock in the TAML-Level 4 completion. |
| |
| Keywords: | multilateral well washover whipstock drilling parameter |
| 本文献已被 维普 等数据库收录！ |
