首页 | 本学科首页   官方微博 | 高级检索  
     检索      

方解石多晶集合体的高速率简单剪切变形实验研究
引用本文:嵇少丞,刘增岗.方解石多晶集合体的高速率简单剪切变形实验研究[J].地质科学,1987,0(3):282-290.
作者姓名:嵇少丞  刘增岗
作者单位:1. 中国科学院地质研究所;2. 哈尔滨工业大学
摘    要:本文介绍了方解石多晶集合体在高应变率(373S-1到1507S-1)下简单剪切变形实验,结果表明,破裂形式和应变率有关,随着应变率的增加,从晶间微破裂为主变为晶内微破裂和粉碎为主。

关 键 词:方解石  高应变率  简单剪切  实验
收稿时间:1986-06-01
修稿时间:1986-06-01;

A STUDY OF SIMPLE SHEAR DEFORMATION OF POLYCRY- STALLINE CALCITE AGGREGATES AT HIGH-RATE
Ji Shaocheng.A STUDY OF SIMPLE SHEAR DEFORMATION OF POLYCRY- STALLINE CALCITE AGGREGATES AT HIGH-RATE[J].Chinese Journal of Geology,1987,0(3):282-290.
Authors:Ji Shaocheng
Institution:1. Institute of Geology, Acadetnta Sinica, Beijing;2. Harbin Polytechnical University, Harbin
Abstract:The dynamic deformation behavior of polycrystalline calcite has been studied at several very high strain-rates (373s-1 to 1507s-1), confining pressure of 0.1 MPa, and temperature of 20℃, by means of the torsional Kolsky bar modified for simple shear. An alloy (AZ8GU) was used as the material of torsional bars (G=26800 MPa,=2800 Kg/m3). The incident, reflected and transmitted torsional pulsed were recorded using an oscilloscope. The shear stress, strain and strain-rate were evaluated from the recorded torsional pulse signals by means of a miniprocessor.The elastic modulus of dynamic shearing determined is about 810 MPa. The relation between strain-rate and shear strength estimated is:r=2.95 × 102 exp (3.54 × 10-2τ)The effect of increasing strain-rate is, as expected, to rise the shear strength appreciably, which seems reasonable and is consistent with other work. Due to the preferred orientation of grains in the specimen, the fracture stress may exhibit a more complex evolution with increasing strain-rate. The fracture mode in deformed specimen depends on strain-rate. Notably, three macro-mechanical fractures: shear-tensile fracture, shear-tensile and shear-compressive conjugate fracture, and shear smashing fracture are observed under varying strain-rate conditions. Detailed petrographic and scanning electron microscope (SEM) observations of deformed specimens show that slip of grain boundaries, mechanical twinning, intercrystal micro-fracturing and intracrystal micro-cracking, as well as smashing are the principal mechanisms of dynamic deformation. With increasing strain-rate of deformation, there is a transition from dominantly intercrystalline micro-fracturing to dominantly intracrystalline microfracturing or smashing.
Keywords:calcite  high strain-rate  simple shear  experiment  
本文献已被 CNKI 等数据库收录!
点击此处可从《地质科学》浏览原始摘要信息
点击此处可从《地质科学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号