The use of X-ray tomography in the study of water repellents and consolidants |
| |
| Authors: | V Cnudde P Dubruel K De Winne I De Witte B Masschaele P Jacobs E Schacht |
| |
| Institution: | bGhent University, Department of Geology and Soil Science Krijgslaan 281/S8B-9000 Gent, Belgium;cFTB Restoration, Bouwelven 19B-2280 Grobbendonk, Belgium |
| |
| Abstract: | To reduce the weathering rate of natural building stones, a wide variety of water repellents and consolidants are commercially available. Although a lot of research is performed on these products, it remains difficult to determine which product is appropriate to use for a certain type of building stone. Each type of building stone has its own petrographic characteristics (mineralogy, texture, …), leading to typical physical and technical properties which influence its rate of decay. The localisation of the products inside a stone type is not only depending on the properties of the products themselves, but also linked to the texture and structure of the stone. The impregnation depth of the products strongly influences their efficiency and is therefore a key issue in the determination if a product is functional for a certain type of stone. X-ray micro-CT has recently been introduced as a non-destructive material evaluation technique for engineering and geology purposes. The fact that micro-CT can provide information about the internal structure and properties of natural building stones, is a major advantage in the study of their conservation. Firmly linked with more classical research techniques, this non-destructive technique offers an extra dimension to the cultural heritage research.In this paper, non-destructive X-ray computed micro-tomography (micro-CT) turns out to be a powerful tool as it can visualise the presence of water repellents and consolidants inside the stone and can help to detect the influence that these treatments exert on porosity and pore-size distribution. For the visualization of the product its atomic number and density and the amount of product inside the natural building stone is crucial. Besides the contrast in attenuation, the resolution of the micro-CT also needs to be taken into account to obtain a good contrast between stone and product. By doping with 3-bromopropyltrimethoxysilane, more contrast occurs between the stone material and the conservation product. When the amount of product inside the samples is very low and the product is homogeneously spread inside the sample, the doped product is difficult to distinguish from the stone material due to the resolution of the micro-CT. When the amount of doped product inside the stone material reaches a certain threshold value, the dope will appear in the 2D cross-sections derived from micro-CT, creating a good visualization of the products inside the stone samples. |
| |
| Keywords: | Water repellent Consolidant Natural building stones X-ray CT |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
