| 大直径反循环钻头底面形状设计 |
| |
| 引用本文： | 刘建林,殷琨.大直径反循环钻头底面形状设计[J].煤田地质与勘探,2012,40(3):82-85. |
| |
| 作者姓名： | 刘建林 殷琨 |
| |
| 作者单位： | 1. 中煤科工集团西安研究院,陕西西安,710077
2. 吉林大学建设工程学院,吉林长春,130026 |
| |
| 摘 要： | 针对大直径反循环钻头底面形状对反循环形成效果的影响,分析了反循环钻头孔底循环介质流动的特点;基于反循环钻头孔底流动模拟实验器对凸面型、凹面型和凸凹组合型3种典型的钻头底面形状进行了对比测试;运用CFD技术对不同底面形状反循环钻头孔底局部流场进行了数值模拟,揭示了其各自的流动特征及影响反循环形成效果的机理。实验结果表明,凹面型钻头底面形状更有利于反循环的形成。反循环钻头底面形状设计研究对改善和提高大直径反循环钻头的性能具有重要的意义。
|
| 关 键 词： | 反循环钻头 底面形状 实验测试 数值模拟 |
| 收稿时间： | 2011-08-17 |
Design of undersurface figure for large-diameter reverse circulation drill bit |
| |
| LIU Jianlin
,
YIN Kun.Design of undersurface figure for large-diameter reverse circulation drill bit[J].Coal Geology & Exploration,2012,40(3):82-85. |
| |
| Authors: | LIU Jianlin YIN Kun |
| |
| Institution: | 1.Xi’an Research Institute,China Coal Technology & Engineering Group Corp,Xi’an 710077,China;2.College of Construction Engineering,Jilin University,Changchun 130026,China) |
| |
| Abstract: | Aiming at the reasonable structure design of large-diameter reverse circulation drill bit used in gas drill-ing,research on the relationship between undersurface figure of reverse circulation drill bit and forming effect of reverse circulation was carried out in this paper.Firstly,the flow characteristics of compressed air under reverse circulation drill bit were analyzed.Then the experimental tests were done with experimental apparatus for hole-bottom flow field simulation of special reverse circulation drill bit,three types of undersurface figure: con-vexity,concave and combination of convexity and concave were designed for reverse circulation drill bit and tested with regard to forming effect of reverse circulation,the results show that concave undersurface figure is beneficial to formation of reverse circulation.Finally,with CFD technology,the numerical simulation of bottom flow field formed by reverse circulation drill bit with different undersurface figure was done,which exposes the flow charac-teristics of compressed air under the drill bit and the mechanism of reverse circulation forming affected by under-surface figure.The research on the undersurface figure design is helpful to improve the performance of large-diameter reverse circulation drill bit. |
| |
| Keywords: | reverse circulation drill bit undersurface figure experimental test numerical simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《煤田地质与勘探》浏览原始摘要信息 |
| 点击此处可从《煤田地质与勘探》下载免费的PDF全文 |
|
