| 浮法玻璃过渡辊台辊子姿态的非接触精密检测 |
| |
| 引用本文： | 刘尚国,于胜文,郑文华.浮法玻璃过渡辊台辊子姿态的非接触精密检测[J].测绘科学,2010,35(6):145-146,128. |
| |
| 作者姓名： | 刘尚国 于胜文 郑文华 |
| |
| 作者单位： | 山东科技大学测绘科学与工程学院,山东,青岛,266510;山东科技大学测绘科学与工程学院,山东,青岛,266510;山东科技大学测绘科学与工程学院,山东,青岛,266510 |
| |
| 基金项目： | 高等学校博士学科点专项科研基金资助课题，精密工程与工业测量国家测绘局重点实验室开放基金资助项目，中国煤炭工业协会科学技术研究指导性计划项目 |
| |
| 摘 要： | 采用由两台Leica TM5100A电子经纬仪构成的Axyz工业测量系统,对某浮法玻璃生产线过渡辊台、渣箱及辊子的平行度及其相对高差进行了非接触精密检测。在没有已知控制点的情况下,借助激光发射器投射激光点,测定高温目标和运转目标上的检测点三维坐标。通过坐标系转换、拟合计算等,分析其平行度、垂直度、相对高差等姿态信息,为辊子的维护工作提供可靠的调整数据。检测结果表明,在20m范围内的高温嘈杂环境下,能够满足其亚毫米级的测量精度要求。
|
| 关 键 词： | 工业测量系统 浮法玻璃 过渡辊台 辊子 |
Precise non-contact detection of lift-up rollers'attitude on float glass flow |
| |
| LIU Shang-guo,YU Sheng-wen,ZHENG Wen-hua.Precise non-contact detection of lift-up rollers'attitude on float glass flow[J].Science of Surveying and Mapping,2010,35(6):145-146,128. |
| |
| Authors: | LIU Shang-guo YU Sheng-wen ZHENG Wen-hua |
| |
| Abstract: | Axyz industrial measuring system,which based on two Leica TM5100A electronical theodolites,was used in precise non-contact detection of some objects'attitude on a float glass flow.Detection contents included level and relative height difference of lift-up rollers,slag box and rollers.In the case of having none known control points,3D coordinates of points on high-temperature and operating objects were measured by means of a laser transmitter,which could project laser points on such objects.And then,attitude information of measured objects,such as parallelism,verticality,relative height difference and so on,were analysed when measured 3D coordinates were converted and fitting calculated.Such information could provide credible adjusted data for rollers'maintenance job.Detection results showws that sub-mm-level measurement accuracy requirements were met. |
| |
| Keywords: | industrial measuring system float glass lift-up rollers roller |
| 本文献已被 万方数据 等数据库收录！ |
|
