| 电磁波电阻率悬挂孔应力集中分析及优化设计 |
| |
| 引用本文： | 郭宝左,刘金柱,于芳芳,姚波,刘栋梁,康凯,顾继俊.电磁波电阻率悬挂孔应力集中分析及优化设计[J].探矿工程,2017,44(7):41-47. |
| |
| 作者姓名： | 郭宝左 刘金柱 于芳芳 姚波 刘栋梁 康凯 顾继俊 |
| |
| 作者单位： | 北京环鼎科技有限责任公司,北京环鼎科技有限责任公司,北京环鼎科技有限责任公司,北京环鼎科技有限责任公司,中国石油大学(北京),中国石油大学(北京),中国石油大学（北京） |
| |
| 摘 要： | 电磁波电阻率钻铤悬挂孔产生的应力集中，是钻铤结构强度最薄弱的环节，最终影响钻铤使用寿命。介绍了电磁波电阻率钻铤结构形式，对钻铤两悬挂孔孔间距离以及在圆周方向上与谐振窗的不同夹角分别进行讨论，利用三维建模软件和有限元分析软件模块分别对设计的钻铤结构进行实体建模，在单独施加扭矩载荷和施加压力、扭矩复合载荷2种情况下进行有限元计算，优选出一种合理结构，为下一步的优化设计和加工新型钻铤提供了理论基础。
|
| 关 键 词： | 电磁波电阻率 圆孔应力集中 优化设计 有限元计算 钻铤 |
| 收稿时间： | 2017/4/26 0:00:00 |
| 修稿时间： | 2017/4/26 0:00:00 |
Analysis on Stress Concentration Produced by Hanging Holes for Electromagnetic Wave Resistivity Instrument and the Structure Optimization Design |
| |
| GUO Bao-zuo,LIU Jin-zhu,YU Fang-fang,YAO Bo,LIU Dong-liang,KANG Kai and GU Ji-jun.Analysis on Stress Concentration Produced by Hanging Holes for Electromagnetic Wave Resistivity Instrument and the Structure Optimization Design[J].Exploration Engineering(Drilling & Tunneling),2017,44(7):41-47. |
| |
| Authors: | GUO Bao-zuo LIU Jin-zhu YU Fang-fang YAO Bo LIU Dong-liang KANG Kai and GU Ji-jun |
| |
| Institution: | Beijing Huanding Energy Services,Beijing Huanding Energy Services,bBeijing Huanding Energy Services,Beijing Huanding Energy Services,China University of Petroleum,China University of Petroleum,China University of Petroleum |
| |
| Abstract: | The stress concentration caused by the drill collar hanging holes for the electromagnetic wave resistivity tool is the weakest strength point of the drill collar, which finally influences the service life of drill collar. The structure of the drill collar with electromagnetic wave resistivity instrument is described in this paper, and the schemes of distance between the hanging holes of drill collar and the different angles with the resonant window in the circumferential directions are discussed. The entity models of drill dollar structures are made by three-dimensional modeling software and finite element analysis software module, the finite element calculations are performed under 2 conditions of imposing single torque load and imposing the compound load of pressure and torque to select a kind of reasonable structure, which can be a theoretical basis for optimal design and manufacture of new drill collar next. |
| |
| Keywords: | electromagnetic wave resistivity round hole stress concentration optimal design finite element calculation drill collar |
|
| 点击此处可从《探矿工程》浏览原始摘要信息 |
| 点击此处可从《探矿工程》下载免费的PDF全文 |
|
