Influence of infill distribution and design typology on seismic performance of low- and mid-rise RC buildings |
| |
| Authors: | Paolo Ricci Maria Teresa De Risi Gerardo Mario Verderame Gaetano Manfredi |
| |
| Institution: | 1. Department of Structures for Engineering and Architecture, University of Naples Federico II, Via Claudio 21, 80125, Naples, Italy
|
| |
| Abstract: | A growing attention has been addressed to the influence of infills on the seismic behavior of Reinforced Concrete buildings, also supported by the observation of damage to infilled RC buildings after severe earthquakes (e.g. L’Aquila 2009, Lorca 2011). In this paper, a numerical investigation on the influence of infills on the seismic behavior of four different case study buildings is carried out: four- and eight-storey buildings, designed for seismic loads according to the current Italian technical code or for gravity loads only according to an obsolete technical code, are considered. Seismic capacity at two Limit States (Damage Limitation and Near Collapse) is assessed through static push-over analyses, within the N2 spectral assessment framework. Different infill configurations are considered (Bare, Uniformly Infilled, Pilotis), and a sensitivity analysis is carried out, thus evaluating the influence of main material and capacity parameters on seismic response, depending on the number of storeys and the design typology. Fragility curves are obtained, through the application of a Response Surface Method. Seismic performance is also expressed in terms of failure probability, given a reference time period. |
| |
| Keywords: | |
| 本文献已被 SpringerLink 等数据库收录！ |
|
