| Abstract: | The more sensitive an analysis method the more care must be given to sample preparation. Solid phase extraction (SPE) onto RP 18 phases has established itself as a general purification and enrichment technique for trace components in aqueous samples. Various factors may thereby influence the recovery rate. For example, the ratio amount of sorbent and sample volume should be taken into account to avoid breakthrough of the investigated substance. Extracting phenylurea herbicides from drinking water, the ratio should be 1 g RP 18 sorbent per 1 L water sample. Concerning the flow rate for the fungicides procymidone, vinclozolin, and iprodione, the recovery rate decreases using higher flow rates than 3 or 6 mL/min. In the case of phenylurea herbicides, a flow rate of 10 or 14 mL/min showed best results. Even the coefficient of variation is below ± 5% at these flow rates. Furthermore, the company dependence should be considered because the recovery rate might differ by up to 40% using the nominally identical material. The same applies to the batch dependence of quality from the same company. The concentration of the eluate must also be monitored and carried out with great care to avoid decreasing the recovery rate. Considering these factors of influence, SPE is a very useful tool in sample preparation, particularly if an automated system is used. |
