Evaluating the environmental risks associated with the use of chromated copper arsenate-treated wood products in aquatic environments |
| |
| Authors: | Kenneth M Brooks |
| |
| Institution: | 1. Aquatic Environmental Sciences, 644 Old Eaglemount Road, 98368, Port Townsend, Washington
|
| |
| Abstract: | Chromated copper arsenate (CCA)-treated wood has been used worldwide since 1933. In properly fixed wood, the chromium, copper, and arsenic are tightly bound to the wood fibers. However, it has long been known that small amounts of these metals do leach from properly treated wood products. These metals, particularly the cupric ion (Cu2+), are known to be highly toxic to aquatic organisms at concentrations as low as 6 μg Cu l?1. The United States Environmental Protection Agency has established a marine water quality standard of 2.9 μg Cu l?1 total copper. Washington State has established a marine water quality standard of 2.5 μg Cu l?1 and a marine sediment standard of 390 mg Cu g?1 (dry sediment). Comparison of these standards with the results of bioassays suggests that these levels are sufficiently low to protect even the most sensitive organisms. Metal losses are an inverse function of time and decline to background levels within 60–90 d of treated wood immersion. Increasing use of CCA-treated wood to construct residential bulkheads in estuarine environments on the east coast of the United States has raised concerns regarding the near-term environmental risks associated with these uses. This paper reports the development of a spreadsheet-based computer model to predict water column and sediment concentrations of copper leached from bulkheads and piling. Model output is compared with data in Weis et al. (1991, 1993) and Weis and Weis (1992). The model predicts environmental levels of copper that are highly dependent on input parameters but below regulatory levels for most projects constructed in reasonably well-circulated bodies of water. The model does demonstrate the possibility of exceeding regulatory standards for up to 3 wk when bulkheads are installed in very poorly flushed aquatic environments or where the surface area of the CCA-treated wood structure is a significant proportion of the water body surface area. |
| |
| Keywords: | |
| 本文献已被 SpringerLink 等数据库收录！ |
|
