Treatment of Arsenic Contaminated Groundwater Using Calcium Impregnated Granular Activated Carbon in a Batch Reactor: Optimization of Process Parameters |
| |
| Authors: | Prasenjit Mondal Bikash Mohanty Chandrajit Balomajumder |
| |
| Institution: | Department of Chemical Engineering, Indian Institute of Technology Roorkee, Roorkee, India. |
| |
| Abstract: | This paper is an experimental investigation into the removal of arsenic species from simulated groundwater by adsorption onto Ca2+ impregnated granular activated carbon (GAC‐Ca) in the presence of impurities like Fe and Mn. The effects of adsorbent concentration, pH and temperature on the percentage removal of total arsenic (As(T)), As(III) and As(V) have been discussed. Under the experimental conditions, the optimum adsorbent concentration of GAC‐Ca was found to be 8 g/L with an agitation time of 24 h, which reduced As(T) concentration from 188 to 10 μg/L. Maximum removal of As(V) and As(III) was observed in a pH range of 7–11 and 9–11, respectively. Removal of all the above arsenic species decreased slightly with increasing temperature. The presence of Fe and Mn increased the adsorption of arsenic species. Under the experimental conditions at 30°C, the maximum percentage removals of As(T), As(III), As(V), Fe, and Mn were found to be ca. 94.3, 90.6, 98.0, 100 and 63%, respectively. It was also observed that amongst the various regenerating liquids used, a 5 N H2SO4 solution exhibited maximum regeneration (ca. 91%) of the spent GAC‐Ca. |
| |
| Keywords: | Adsorption Arsenic GAC‐Ca Groundwater Surface modified adsorbents |
|
|
