Recovery of Phosphate Sludge as Concrete Supplementary Material |
| |
| Authors: | Özgür Do?an Mehmet Karpuzcu |
| |
| Institution: | 1. Tubitak Marmara Research Center, Environment Institute, Kocaeli, Turkey;2. Gebze Institute of Technology, Kocaeli, Turkey |
| |
| Abstract: | The automotive industry plays a major role in the worldwide economy and represents an opportunity to increase the performance of the Turkish economy. Phosphating units in the automotive manufacturing plants generate phosphate sludge as waste, which is classified as hazardous waste in the European Waste Catalogue. Phosphate sludge must be disposed of in licensed disposal plants according to the current environmental regulations. Solidification/stabilization (S/S) is a widely used treatment technology for the disposal of hazardous wastes. Portland cement is used for the solidification and stabilization processes to immobilize Ni and Zn in the phosphate sludge as well as to create construction material to be used as cobble stone for pavement. Examination of products obtained by S/S processes is performed for two points: to determine the quality and to assess the environmental impacts. The phosphate sludge samples are subjected to chemical characterization and a size distribution analysis leaching test. Concrete for cobble stone was produced by the S/S process with the addition of phosphate sludge to replace sand. Tests for the quality of the product were carried out to determine compressive strength, permeability, and elasticity. At the end of the leaching test, elution concentrations of Zn and Ni while using water with pH values of 4.0, 5.4, and 9.0 were determined to be under the limit of inert material properties. Use of phosphate sludge should be considered as a sand replacement in the proportion of 1% of phosphate sludge to cement in concrete production, such as for cobble stone for pavement, without any adverse environmental impacts. |
| |
| Keywords: | Hazardous waste Phosphate sludge Recovery Solidification/stabilization |
|
|
