| 3500 m钻机移摆管设计及动力学仿真研究 |
| |
| 引用本文： | 陈根龙,张金昌,刘凡柏,韩丽丽,陈浩文,于建丛.3500 m钻机移摆管设计及动力学仿真研究[J].探矿工程,2014,41(4):56-60. |
| |
| 作者姓名： | 陈根龙 张金昌 刘凡柏 韩丽丽 陈浩文 于建丛 |
| |
| 作者单位： | [1]中国地质科学院勘探技术研究所,河北廊坊065000 [2]中国地质大学〈北京〉工程技术学院,北京100083 |
| |
| 基金项目： | 基金项目：中国地质调查局地质大调查项目“3500米深部地质勘查全液压钻探装备配套示范”（12120113016500） |
| |
| 摘 要： | 随着我国探矿深度不断增加，钻探设备的尺寸不断加大，操作人员的劳动强度也在增加。基于此，3500 m液压岩心钻机需要适配一套移摆管装置，以实现快速、安全地运移钻杆，降低工人的劳动强度。对移摆管机构的设计进行了简单介绍，并利用ADAMS动力学仿真软件对移摆管机构进行运动仿真，找出设计的不足之处，给出优化建议。
|
| 关 键 词： | 液压钻机 移摆管 动力学仿真 |
| 收稿时间： | 2014/3/28 0:00:00 |
| 修稿时间： | 2014/3/28 0:00:00 |
Design of Pipe Racking for 3500m Hydraulic Core Drill Rig and the Dynamic Simulation Analysis |
| |
| CHEN Gen-long,ZHANG Jin-chang,LIU Fan-bai,HAN Li-li,CHEN Hao-wen and YU Jian-cong.Design of Pipe Racking for 3500m Hydraulic Core Drill Rig and the Dynamic Simulation Analysis[J].Exploration Engineering(Drilling & Tunneling),2014,41(4):56-60. |
| |
| Authors: | CHEN Gen-long ZHANG Jin-chang LIU Fan-bai HAN Li-li CHEN Hao-wen and YU Jian-cong |
| |
| Institution: | 1. The Institute of Exploration Techniques, CAGS , Langfang Hebei 065000,China; 2. College of Engineering and Technology, China University of Geosciences, Beijing 100083, China) |
| |
| Abstract: | With the increasing depth of exploration,the size of drilling equipment becomes larger and larger, and the labor intensity of operators is also on the increase.Based on this situation, a set of pipe racking device is needed for 3500m hy-draulic core drill to realize fast and safe pipe arranging and reduce labor intensity of operating workers.The paper briefly in-troduces the design of the pipe racking device; motion simulation is conducted on pipe racking device by using dynamic simulation software ADAMS to identify the deficiencies in the design, and some optimization suggestions are put forward. |
| |
| Keywords: | ADAMS hydraulic core drill pipe racking ADAMS dynamic simulation |
| 本文献已被 维普 等数据库收录！ |
| 点击此处可从《探矿工程》浏览原始摘要信息 |
| 点击此处可从《探矿工程》下载免费的PDF全文 |
|
