首页 | 本学科首页   官方微博 | 高级检索  
     检索      

明长城长度测量关键技术
引用本文:赵有松,宫辉力,廖安平,彭舒,李明.明长城长度测量关键技术[J].测绘科学,2012,37(2):161-163.
作者姓名:赵有松  宫辉力  廖安平  彭舒  李明
作者单位:1. 首都师范大学,北京100048;国家基础地理信息中心,北京100830
2. 首都师范大学,北京,100048
3. 国家基础地理信息中心,北京,100830
摘    要:按照基于影像的长城解译与调查结果,为科学获取明长城的坡面长度,本文主要采用了下列的关键技术:首先为不同种类的长城段落定义测量规则;其次,准确确定长城每段的起止点;第三,按照统一的标准和技术流程在立体模型上精确测定长城每一处特征点的三维空间坐标;最后,在统一的计算模型下,计算每段长城的长度,通过汇总的方式获得分省工作区和全国的各类长城长度。成果为相关研究提供了参考。

关 键 词:长度测量  数字摄影测量  数据整合

Key technology of measuring length of the Ming Great Wall
ZHAO You-song , GONG Hui-li , LIAO An-ping , PENG Shu , LI Ming.Key technology of measuring length of the Ming Great Wall[J].Science of Surveying and Mapping,2012,37(2):161-163.
Authors:ZHAO You-song  GONG Hui-li  LIAO An-ping  PENG Shu  LI Ming
Institution:②(①Capital Normal University,Beijing 100048,China;②National Geomatics Center of China,Beijing 100830,China)
Abstract:According to the image interpretation and investigation results of the Great Wall,the following key technologies were used to capture the slope length of the Ming Great Wall in the paper,firstly,the measurement rules for the all kinds of the Section Great Wall were defined;secondly,the beginning and ending position points of each measuring section of the Great Wall were accurately determined;thirdly,the three-dimensional coordinates of each inflex point on the surface center line of the MGW under the stereo pairs with uniform standards and technical processes were accurately measured;finally,under the unified length calculation model,the each section length of the Great Wall was figured up until the provincial and the national lengths of various types of Great Wall were derived from the section length.the results provided a reference for related studies.
Keywords:length measurement  digital photogrammetry  data integration
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号