Numerical modeling assessment of three-gate structures for capturing contaminated groundwater |
| |
| Authors: | Paul F Hudak |
| |
| Institution: | (1) Department of Geography and Environmental Science Program, University of North Texas, Denton, TX 76203-5279, USA |
| |
| Abstract: | This modeling study evaluated the capability of alternative funnel-and-gate structures with three gates for capturing contaminated
groundwater in a hypothetical unconfined aquifer. Simulated interceptor structures were linear and 45 m wide, consisting of
three gates and two funnels (walls). One gate occupied the center and two gates occupied the ends of the interceptor structures.
The structures, positioned perpendicular to regional groundwater flow, traversed the entire thickness of the aquifer. A total
of four structures were evaluated (numbers designate widths of end, center, and end gates, respectively, in meters): 3-3-3,
2-5-2, 1-7-1, and 4-1-4. Particle tracking and zonal water budgets identified shapes of capture zones and discharge patterns
for each interceptor structure. A mass transport model, accounting for advection and hydrodynamic dispersion, tested the capability
of each structure for capturing a contaminant plume. Results suggest that: time-dependent capture zones underestimate the
amount of time to capture a contaminant plume, wide center gates facilitate plume capture, and wide end gates facilitate lateral
containment of contaminants. Of the structures simulated, the 2-5-2 configuration was relatively efficient at processing and
containing the simulated contaminant plume. |
| |
| Keywords: | Groundwater Funnel and gate Mass transport Capture zone |
| 本文献已被 SpringerLink 等数据库收录！ |
|
